temp/calamares-extensions: fork, increase timeout (MR 3280)

Increase the timeout for the PartitionJob from 2 min to 10 min, so it works on the PinePhone Pro with its 128 GiB eMMC. Related: https://github.com/calamares/calamares-extensions/pull/20 [ci:skip-vercheck]: forked pkg intentionally not having pkgrel=0
device-pine64-pinephonepro: backport to stable
2022-07-11 21:33:01 +02:00 · 2022-07-11 21:32:40 +02:00
16 changed files with 7814 additions and 0 deletions
@@ -0,0 +1,12 @@
+SUBSYSTEMS=="usb", ENV{.LOCAL_ifNum}="$attr{bInterfaceNumber}"
+
+SUBSYSTEMS=="usb", KERNEL=="ttyUSB[0-9]*", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", ENV{.LOCAL_ifNum}=="01", SYMLINK+="EG25.NMEA", MODE="0660"
+SUBSYSTEMS=="usb", KERNEL=="ttyUSB[0-9]*", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", ENV{.LOCAL_ifNum}=="02", SYMLINK+="EG25.AT", MODE="0660"
+SUBSYSTEMS=="usb", KERNEL=="ttyUSB[0-9]*", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", ENV{.LOCAL_ifNum}=="03", SYMLINK+="EG25.MODEM", MODE="0660"
+
+ACTION=="add", SUBSYSTEM=="tty", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", ENV{.LOCAL_ifNum}=="02", RUN+="/usr/bin/pinephone_setup-modem '%E{DEVNAME}'"
+
+ACTION=="add", SUBSYSTEM=="usb", DRIVERS=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", ATTRS{serial}=="0123456789ABCDEF", ATTR{power/persist}="1", ATTR{power/control}="on"
+
+ACTION=="add", SUBSYSTEM=="usb", DRIVERS=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", ATTRS{serial}=="community_fw", ATTR{power/persist}="1", ATTR{power/control}="on"
+
@@ -0,0 +1,123 @@
+# Reference: <https://postmarketos.org/devicepkg>
+# Maintainer: Martijn Braam <martijn@brixit.nl>
+pkgname=device-pine64-pinephonepro
+pkgdesc="PINE64 PinePhone Pro"
+pkgver=3.2
+pkgrel=0
+url="https://postmarketos.org"
+license="MIT"
+arch="aarch64"
+# pmb:strict is required for grub
+options="!check !archcheck pmb:strict"
+depends="
+	alsa-ucm-conf>=1.2.6.2
+	eg25-manager>=0.4.2
+	linux-pine64-pinephonepro
+	mesa-dri-gallium
+	postmarketos-base
+	fwupd
+	fwupd-plugin-modem_manager
+	fwupd-plugin-fastboot
+	"
+makedepends="
+	devicepkg-dev
+	grub
+	grub-efi
+	"
+subpackages="$pkgname-nonfree-firmware:nonfree_firmware"
+install="
+	$pkgname.post-install
+	$pkgname.post-upgrade
+	"
+source="
+	90-modem-eg25.rules
+	deviceinfo
+	grub.cfg
+	grub_early.cfg
+	ucm/HiFi.conf
+	ucm/PINE64-PinePhonePro-.conf
+	ucm/VoiceCall.conf
+	ppkb.sh
+	setup-modem.sh
+	"
+
+build() {
+	devicepkg_build $startdir $pkgname
+
+	grub-mkimage \
+		--config="$srcdir/grub_early.cfg" \
+		--prefix="" \
+		--output="bootaa64.efi" \
+		--format="arm64-efi" \
+		--compression="xz" \
+		\
+		all_video \
+		cat \
+		configfile \
+		disk \
+		echo \
+		efi_gop \
+		fat \
+		gzio \
+		help \
+		iso9660 \
+		linux \
+		ls \
+		normal \
+		part_gpt \
+		part_msdos \
+		search \
+		search_label \
+		test \
+		true
+}
+
+package() {
+	devicepkg_package $startdir $pkgname
+
+	# Grub / bootloader
+	install -Dm644 -t "$pkgdir"/boot/grub \
+		"$srcdir"/grub.cfg
+	install -Dm644 -t "$pkgdir"/boot/EFI/Boot \
+		"$srcdir"/bootaa64.efi
+
+	# Alsa usecase manager config
+	install -Dm644 -t "$pkgdir"/usr/share/alsa/ucm2/PinePhonePro \
+		"$srcdir"/HiFi.conf \
+		"$srcdir"/PINE64-PinePhonePro-.conf \
+		"$srcdir"/VoiceCall.conf
+	mkdir -p "$pkgdir"/usr/share/alsa/ucm2/conf.d/simple-card
+	ln -s /usr/share/alsa/ucm2/PinePhonePro/PINE64-PinePhonePro-.conf \
+		"$pkgdir"/usr/share/alsa/ucm2/conf.d/simple-card/PINE64-PinePhonePro-.conf
+
+	# Modem
+	install -Dm755 "$srcdir"/setup-modem.sh \
+		"$pkgdir"/usr/bin/pinephone_setup-modem
+	install -Dm644 "$srcdir"/90-modem-eg25.rules -t \
+		"$pkgdir"/usr/lib/udev/rules.d/
+
+	# Keyboard config
+	install -Dm755 "$srcdir"/ppkb.sh "$pkgdir"/etc/profile.d/ppkb.sh
+}
+
+nonfree_firmware() {
+	pkgdesc="Wifi, Bluetooth and video-out firmware"
+	depends="
+		firmware-pine64-pinebookpro
+		linux-firmware-brcm
+		linux-firmware-rockchip
+		"
+	mkdir "$subpkgdir"
+}
+
+sha512sums="
+fdfa807c0de33aee3deb09ee25c37a58fa970ce71483e52f21793717cb89adeb74f251ff1a2c2086361e3e58877f8b2e5643f24186b1a537acf9c16e3419313c  90-modem-eg25.rules
+e591572d0bfc4d7d990fcc15bc82e78e60404becf62a38283b4ceee6f49a812b63eebbc5c304907330e33dce5f023edba26c9b86f1375affa3cf6b49fbd06539  deviceinfo
+eeddbd3712c7385ef8daea252d71f9f91f8be03be43dea4ce036ae7d7b8a38d199a709ae87b9aa8fe8a63f0201224dbda704fd4b95c8c7d3b4f9852ae4e95c11  grub.cfg
+0f9357d4eea089628fbceb1e3e96d21a3f4329aeb6743158a6f877f967ef274506404eba949d5f01b7e1adea149f9a3aef992a5e8cd4181f93ab00909b1c5ecd  grub_early.cfg
+1684514a6b814a83473e9da8855fd776cf3f31a2be1f8834c370f710428b4ee305559e275be52894d167ccd1e32f8f1c8586f8a072f19e44b46caec9f504d453  HiFi.conf
+9c6edbe7ea387baf9bfa6c4a46b28c4fe274ab0994e0a1640012048407e6679c437de43cc50e6778c9a852132eaa680de3fd4e0256d36455d1dd57aa729ac8be  PINE64-PinePhonePro-.conf
+deb360baf914e1c917403d5e26291b9e9d27426876232ab753e4ebfe367423206f1fc01b85d195aa69fb4b51bcaed023423d0fcc0d73fa1bedd5fbe7b17f0fb5  VoiceCall.conf
+43f67e94491791685cdbb4874bb3034b1d297bdf3d23e7405c45ba8c58de72b4fb6a9943b79f46ef7b8f4dbc4d9db254ebec8eb3453d720a5a8fad277c6a9d88  ppkb.sh
+420ee1d7522d4d56c2909580fd6ba7580483ca5455b13eb6d22e700063ce0c1a5c6d2f5b161dfce0d777636fe9a712aa82f38a0585f2feabea3785b02bae7515  setup-modem.sh
+"
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+rc-update add eg25-manager default
@@ -0,0 +1 @@
+device-pine64-pinephonepro.post-install
@@ -0,0 +1,28 @@
+# Reference: <https://postmarketos.org/deviceinfo>
+# Please use double quotes only. You can source this file in shell scripts.
+
+deviceinfo_format_version="0"
+deviceinfo_name="PINE64 PinePhone Pro"
+deviceinfo_manufacturer="PINE64"
+deviceinfo_codename="pine64-pinephonepro"
+deviceinfo_year="2021"
+deviceinfo_modules_initfs="gpu_sched dw_wdt fusb302 panel_himax_hx8394 goodix_ts"
+deviceinfo_arch="aarch64"
+
+# Device related
+deviceinfo_gpu_accelerated="true"
+deviceinfo_chassis="handset"
+deviceinfo_keyboard="true"
+deviceinfo_external_storage="true"
+deviceinfo_screen_width="720"
+deviceinfo_screen_height="1440"
+deviceinfo_getty="ttyS2;115200"
+
+# Installer related
+deviceinfo_dev_internal_storage="/dev/mmcblk0"
+deviceinfo_dev_internal_storage_repartition="true"
+
+# Bootloader related
+deviceinfo_flash_method="none"
+deviceinfo_boot_filesystem="fat32"
+deviceinfo_partition_type="gpt"
@@ -0,0 +1,6 @@
+timeout=0
+
+menuentry "postmarketOS" {
+	linux ($root)/vmlinuz console=tty0 earlycon=uart8250,mmio32,0xff1a0000 console=ttyS2,115200 panic=10 coherent_pool=1M loglevel=1 mem_sleep_default=s2idle PMOS_NO_OUTPUT_REDIRECT PMOS_FORCE_PARTITION_RESIZE fw_devlink=off
+	initrd ($root)/initramfs
+}
@@ -0,0 +1,2 @@
+search --no-floppy --set=root --label "pmOS_boot"
+set prefix=($root)/grub
@@ -0,0 +1,2 @@
+#!/bin/sh
+export XKB_DEFAULT_MODEL=ppkb
@@ -0,0 +1,32 @@
+#!/bin/sh
+
+log() {
+	echo "$@" | logger -t "postmarketOS:modem-setup"
+}
+
+QMBNCFG_CONFIG="1"
+
+if [ -z "$1" ]
+then
+	DEV="/dev/EG25.AT"
+else
+	DEV="$1"
+fi
+
+# Read current config
+QMBNCFG_ACTUAL_CONFIG=$(echo 'AT+QMBNCFG="AutoSel"' | atinout - $DEV -)
+
+if echo $QMBNCFG_ACTUAL_CONFIG | grep -q $QMBNCFG_CONFIG
+then
+	log "Modem already configured"
+	exit 0
+fi
+
+
+# Configure VoLTE auto selecting profile
+RET=$(echo "AT+QMBNCFG=\"AutoSel\",$QMBNCFG_CONFIG" | atinout - $DEV -)
+if ! echo $RET | grep -q OK
+then
+	log "Failed to enable VoLTE profile auto selecting: $RET"
+	exit 1
+fi
@@ -0,0 +1,278 @@
+SectionVerb {
+	EnableSequence [
+		# First of all, disable the internal speaker amplifier
+		cset "name='Internal Speaker Switch' off"
+
+		### Based on /codecs/rt5640/EnableSeq.conf ###
+
+		# RT5640 default output routing
+		cset "name='DAC MIXL INF1 Switch' on"
+		cset "name='DAC MIXR INF1 Switch' on"
+		cset "name='DAC MIXL Stereo ADC Switch' off"
+		cset "name='DAC MIXR Stereo ADC Switch' off"
+		cset "name='Stereo DAC MIXL DAC L1 Switch' on"
+		cset "name='Stereo DAC MIXR DAC R1 Switch' on"
+		cset "name='Stereo DAC MIXL DAC L2 Switch' on"
+		cset "name='Stereo DAC MIXR DAC R2 Switch' on"
+		cset "name='OUT MIXL DAC L1 Switch' on"
+		cset "name='OUT MIXR DAC R1 Switch' on"
+		cset "name='SPK MIXL DAC L1 Switch' on"
+		cset "name='SPK MIXR DAC R1 Switch' on"
+
+		# uncomment to enable swap between AIF1 and AIF2
+		# warning: can only work with SSP0 firmware enabled
+		cset "name='SDI select' 0"
+		cset "name='DAI select' 0"
+		#cset "name='SDI select' 1"
+		#cset "name='DAI select' 1"
+
+		cset "name='DAC2 Playback Switch' on"
+
+		# Input Configuration
+		cset "name='Stereo ADC1 Mux' ADC"
+		cset "name='Stereo ADC2 Mux' DMIC1"
+		cset "name='ADC Capture Switch' on"
+
+		cset "name='Mono ADC L1 Mux' ADCL"
+		cset "name='Mono ADC R1 Mux' ADCR"
+		cset "name='Mono ADC L2 Mux' DMIC L1"
+		cset "name='Mono ADC R2 Mux' DMIC R1"
+		cset "name='Mono ADC Capture Switch' on"
+
+		# Set capture volume to 0dB so modem audio doesn't overdrive the ADC
+		cset "name='ADC Capture Volume' 47"
+		cset "name='Mono ADC Capture Volume' 47"
+
+		# The second 'Mono ADC' path does not have a 'Boost Gain',
+		# set this to 0dB so that the volume of the AIF1 and AIF2 paths is equal.
+		cset "name='ADC Boost Gain' 0"
+
+		# Set IN1 internal mic boost to 8 (max)
+		# Set IN2 headset-mic boost to 1, headset mics are quite loud
+		# Set IN3 (modem audio) boost to 0 as it's already loud enough
+		cset "name='IN1 Boost' 8"
+		cset "name='IN2 Boost' 1"
+		cset "name='IN3 Boost' 0"
+
+		# Start with all controls which are used by the individual
+		# input/output Enable/DisableSequences off
+
+		cset "name='RECMIXL BST1 Switch' off"
+		cset "name='RECMIXR BST1 Switch' off"
+		# IN2 is headset mic, make sure its route is enabled
+		cset "name='RECMIXL BST2 Switch' on"
+		cset "name='RECMIXR BST2 Switch' on"
+		cset "name='RECMIXL BST3 Switch' off"
+		cset "name='RECMIXR BST3 Switch' off"
+
+		cset "name='Stereo ADC MIXL ADC1 Switch' off"
+		cset "name='Stereo ADC MIXR ADC1 Switch' off"
+		cset "name='Stereo ADC MIXL ADC2 Switch' off"
+		cset "name='Stereo ADC MIXR ADC2 Switch' off"
+		cset "name='Mono ADC MIXL ADC1 Switch' off"
+		cset "name='Mono ADC MIXR ADC1 Switch' off"
+		cset "name='Mono ADC MIXL ADC2 Switch' off"
+		cset "name='Mono ADC MIXR ADC2 Switch' off"
+
+		# Limit amplification factor of earpiece amplifier so sound stays clear
+		cset "name='Class D SPK Ratio Control' 1.66x"
+
+		# Turn off playback switches by default, otherwise both Speaker
+		# and headphones are playing audio initially until headphones are
+		# re-inserted.
+		cset "name='HP L Playback Switch' off"
+		cset "name='HP R Playback Switch' off"
+		cset "name='Speaker L Playback Switch' off"
+		cset "name='Speaker R Playback Switch' off"
+
+		# MONO output is used as IN3 here, so make sure it's disabled
+		cset "name='Mono Playback Switch' off"
+
+		# Set playback volumes to 0dB
+		cset "name='HP Playback Volume' 31"
+		cset "name='Speaker Playback Volume' 31"
+	]
+
+	DisableSequence [
+		# Turn off all output channels
+		cset "name='HP L Playback Switch' off"
+		cset "name='HP R Playback Switch' off"
+		cset "name='HP Channel Switch' off"
+		cset "name='HPO MIX HPVOL Switch'  off"
+		cset "name='Speaker L Playback Switch' off"
+		cset "name='Speaker R Playback Switch' off"
+		cset "name='Speaker Channel Switch' off"
+		cset "name='SPOL MIX SPKVOL L Switch' off"
+		cset "name='SPOL MIX SPKVOL R Switch' off"
+
+
+		# Reset output routing
+		cset "name='DAC MIXL INF1 Switch' off"
+		cset "name='DAC MIXR INF1 Switch' off"
+		cset "name='OUT MIXL DAC L1 Switch' off"
+		cset "name='OUT MIXR DAC R1 Switch' off"
+		cset "name='SPK MIXL DAC L1 Switch' off"
+		cset "name='SPK MIXR DAC R1 Switch' off"
+	]
+
+	Value {
+		TQ "HiFi"
+	}
+}
+
+SectionDevice."Earpiece" {
+	Comment "Internal Earpiece"
+
+	ConflictingDevice [
+		"Headphones"
+		"Speaker"
+	]
+
+	EnableSequence [
+		cset "name='SPOL MIX SPKVOL L Switch' on"
+# for mono speaker we apply left on right
+#		cset "name='SPOR MIX SPKVOL R Switch' on"
+		cset "name='SPOL MIX SPKVOL R Switch' on"
+		cset "name='Speaker Channel Switch' on"
+		cset "name='Speaker L Playback Switch' on"
+		cset "name='Speaker R Playback Switch' on"
+	]
+
+	DisableSequence [
+		cset "name='Speaker Channel Switch' off"
+		cset "name='Speaker L Playback Switch' off"
+		cset "name='Speaker R Playback Switch' off"
+	]
+
+	Value {
+		PlaybackPriority 100
+		PlaybackPCM "hw:${CardId}"
+		PlaybackMixerElem "Speaker"
+		PlaybackVolume "Speaker Playback Volume"
+		PlaybackMasterElem "DAC1"
+	}
+}
+
+SectionDevice."Speaker" {
+	Comment "Internal Speaker"
+
+	ConflictingDevice [
+		"Earpiece"
+		"Headphones"
+	]
+
+	EnableSequence [
+		cset "name='HPO MIX HPVOL Switch'  on"
+		cset "name='HP Channel Switch' on"
+		cset "name='HP L Playback Switch' on"
+		cset "name='HP R Playback Switch' on"
+		cset "name='Internal Speaker Switch' on"
+	]
+
+	DisableSequence [
+		cset "name='Internal Speaker Switch' off"
+		cset "name='HP Channel Switch' off"
+		cset "name='HP L Playback Switch' off"
+		cset "name='HP R Playback Switch' off"
+	]
+
+	Value {
+		PlaybackPriority 200
+		PlaybackPCM "hw:${CardId}"
+		PlaybackMixerElem "HP"
+		PlaybackVolume "HP Playback Volume"
+		PlaybackMasterElem "DAC1"
+	}
+}
+
+SectionDevice."Headphones" {
+	Comment "Headphones"
+
+	ConflictingDevice [
+		"Earpiece"
+		"Speaker"
+	]
+
+	EnableSequence [
+ 		cset "name='HPO MIX HPVOL Switch'  on"
+		cset "name='HP Channel Switch' on"
+		cset "name='HP L Playback Switch' on"
+		cset "name='HP R Playback Switch' on"
+	]
+
+	DisableSequence [
+		cset "name='HP Channel Switch' off"
+		cset "name='HP L Playback Switch' off"
+		cset "name='HP R Playback Switch' off"
+	]
+
+	Value {
+		PlaybackPriority 300
+		PlaybackPCM "hw:${CardId}"
+		JackControl "Headphones Jack"
+		PlaybackMixerElem "HP"
+		PlaybackVolume "HP Playback Volume"
+		PlaybackMasterElem "DAC1"
+	}
+}
+
+SectionDevice."Mic" {
+	Comment "Internal Microphone"
+
+	ConflictingDevice [
+		"Headset"
+	]
+
+	EnableSequence [
+		cset "name='Mono ADC MIXL ADC2 Switch' on"
+		cset "name='Mono ADC MIXR ADC2 Switch' on"
+		cset "name='Stereo ADC MIXL ADC2 Switch' on"
+		cset "name='Stereo ADC MIXR ADC2 Switch' on"
+	]
+
+	DisableSequence [
+		cset "name='Mono ADC MIXL ADC2 Switch' off"
+		cset "name='Mono ADC MIXR ADC2 Switch' off"
+		cset "name='Stereo ADC MIXL ADC2 Switch' off"
+		cset "name='Stereo ADC MIXR ADC2 Switch' off"
+	]
+
+	Value {
+		CapturePriority 100
+		CapturePCM "hw:${CardId}"
+		CaptureMixerElem "ADC"
+		CaptureVolume "ADC Capture Volume"
+		CaptureSwitch "ADC Capture Switch"
+	}
+}
+
+SectionDevice."Headset" {
+	Comment "Headset Microphone"
+
+	ConflictingDevice [
+		"Mic"
+	]
+
+	EnableSequence [
+		cset "name='Mono ADC MIXL ADC1 Switch' on"
+		cset "name='Mono ADC MIXR ADC1 Switch' on"
+		cset "name='Stereo ADC MIXL ADC1 Switch' on"
+		cset "name='Stereo ADC MIXR ADC1 Switch' on"
+	]
+
+	DisableSequence [
+		cset "name='Mono ADC MIXL ADC1 Switch' off"
+		cset "name='Mono ADC MIXR ADC1 Switch' off"
+		cset "name='Stereo ADC MIXL ADC1 Switch' off"
+		cset "name='Stereo ADC MIXR ADC1 Switch' off"
+	]
+
+	Value {
+		CapturePriority 200
+		CapturePCM "hw:${CardId}"
+		JackControl "Headphones Jack"
+		CaptureMixerElem "ADC"
+		CaptureVolume "ADC Capture Volume"
+		CaptureSwitch "ADC Capture Switch"
+	}
+}
@@ -0,0 +1,16 @@
+Syntax 4
+Comment "PinePhone Pro"
+
+SectionUseCase."HiFi" {
+	File "/PinePhonePro/HiFi.conf"
+	Comment "Default"
+}
+
+SectionUseCase."Voice Call" {
+	File "/PinePhonePro/VoiceCall.conf"
+	Comment "Phone call"
+}
+
+Include.card-init.File "/lib/card-init.conf"
+Include.ctl-remap.File "/lib/ctl-remap.conf"
+Include.codec-init.File "/codecs/rt5640/init.conf"
@@ -0,0 +1,275 @@
+SectionVerb {
+	EnableSequence [
+		# First of all, disable the internal speaker amplifier
+		cset "name='Internal Speaker Switch' off"
+
+		### Based on /codecs/rt5640/EnableSeq.conf ###
+
+		# Get audio only from the microphones, not the system
+		cset "name='DAC MIXL INF1 Switch' off"
+		cset "name='DAC MIXR INF1 Switch' off"
+		cset "name='DAC MIXL Stereo ADC Switch' on"
+		cset "name='DAC MIXR Stereo ADC Switch' on"
+		cset "name='Stereo DAC MIXL DAC L1 Switch' on"
+		cset "name='Stereo DAC MIXR DAC R1 Switch' on"
+		cset "name='Stereo DAC MIXL DAC L2 Switch' on"
+		cset "name='Stereo DAC MIXR DAC R2 Switch' on"
+		cset "name='OUT MIXL DAC L1 Switch' off"
+		cset "name='OUT MIXR DAC R1 Switch' off"
+		cset "name='SPK MIXL DAC L1 Switch' off"
+		cset "name='SPK MIXR DAC R1 Switch' off"
+
+		# uncomment to enable swap between AIF1 and AIF2
+		# warning: can only work with SSP0 firmware enabled
+		cset "name='SDI select' 0"
+		cset "name='DAI select' 0"
+		#cset "name='SDI select' 1"
+		#cset "name='DAI select' 1"
+
+		cset "name='DAC2 Playback Switch' on"
+
+		# Input Configuration
+		cset "name='Stereo ADC1 Mux' ADC"
+		cset "name='Stereo ADC2 Mux' DMIC1"
+		cset "name='ADC Capture Switch' on"
+
+		cset "name='Mono ADC L1 Mux' ADCL"
+		cset "name='Mono ADC R1 Mux' ADCR"
+		cset "name='Mono ADC L2 Mux' DMIC L1"
+		cset "name='Mono ADC R2 Mux' DMIC R1"
+		cset "name='Mono ADC Capture Switch' on"
+
+		# Set capture volume to 0dB so modem audio doesn't overdrive the ADC
+		cset "name='ADC Capture Volume' 47"
+		cset "name='Mono ADC Capture Volume' 47"
+
+		# The second 'Mono ADC' path does not have a 'Boost Gain',
+		# set this to 0dB so that the volume of the AIF1 and AIF2 paths is equal.
+		cset "name='ADC Boost Gain' 0"
+
+		# Set IN1 internal mic boost to 8 (max)
+		# Set IN2 headset-mic boost to 1, headset mics are quite loud
+		# Set IN3 (modem audio) boost to 0 as it's already loud enough
+		cset "name='IN1 Boost' 8"
+		cset "name='IN2 Boost' 1"
+		cset "name='IN3 Boost' 0"
+
+		# Start with all controls which are used by the individual
+		# input/output Enable/DisableSequences off
+
+		cset "name='RECMIXL BST1 Switch' off"
+		cset "name='RECMIXR BST1 Switch' off"
+		# IN2 is headset mic, make sure its routed to the left channel
+		cset "name='RECMIXL BST2 Switch' on"
+		cset "name='RECMIXR BST2 Switch' off"
+		# IN3 is modem audio, route it to the right channel
+		cset "name='RECMIXL BST3 Switch' off"
+		cset "name='RECMIXR BST3 Switch' on"
+
+		cset "name='Stereo ADC MIXL ADC1 Switch' off"
+		cset "name='Stereo ADC MIXR ADC1 Switch' off"
+		cset "name='Stereo ADC MIXL ADC2 Switch' off"
+		cset "name='Stereo ADC MIXR ADC2 Switch' off"
+		cset "name='Mono ADC MIXL ADC1 Switch' off"
+		cset "name='Mono ADC MIXR ADC1 Switch' off"
+		cset "name='Mono ADC MIXL ADC2 Switch' off"
+		cset "name='Mono ADC MIXR ADC2 Switch' off"
+
+		# Limit amplification factor of earpiece amplifier so sound stays clear
+		cset "name='Class D SPK Ratio Control' 1.66x"
+
+		# Loopback IN3 to earpiece/speaker/headphones
+		cset "name='OUT MIXR REC MIXR Switch' on"
+		cset "name='SPK MIXR OUT MIXR Switch' on"
+
+		# Send the left channel (microphones) to the modem through DAC L1
+		cset "name='LOUT MIX DAC L1 Switch' on"
+		# Don't use DAC R1 nor the OUTVOL blocks as we use them for
+		# routing audio from the modem
+		cset "name='LOUT MIX DAC R1 Switch' off"
+		cset "name='LOUT MIX OUTVOL L Switch' off"
+		cset "name='LOUT MIX OUTVOL R Switch' off"
+
+		# Disable left channel for HP (speaker/headphones) output
+		# as we're only routing modem audio to the right channel
+		cset "name='HP L Playback Switch' off"
+
+		# Turn off playback switches by default, otherwise both Speaker
+		# and headphones are playing audio initially until headphones are
+		# re-inserted.
+		cset "name='HP L Playback Switch' off"
+		cset "name='HP R Playback Switch' off"
+		cset "name='Speaker L Playback Switch' off"
+		cset "name='Speaker R Playback Switch' off"
+
+		# MONO output is used as IN3 here, so make sure it's disabled
+		cset "name='Mono Playback Switch' off"
+
+		# Set playback volumes to 0dB
+		cset "name='HP Playback Volume' 31"
+		cset "name='Speaker Playback Volume' 31"
+	]
+
+	DisableSequence [
+		# Turn off all output channels
+		cset "name='HP L Playback Switch' off"
+		cset "name='HP R Playback Switch' off"
+		cset "name='HP Channel Switch' off"
+		cset "name='Speaker L Playback Switch' off"
+		cset "name='Speaker R Playback Switch' off"
+		cset "name='Speaker Channel Switch' off"
+
+		# Reset output routing
+		cset "name='DAC MIXL Stereo ADC Switch' off"
+		cset "name='DAC MIXR Stereo ADC Switch' off"
+		cset "name='OUT MIXR REC MIXR Switch' off"
+		cset "name='SPK MIXR OUT MIXR Switch' off"
+		cset "name='LOUT MIX DAC L1 Switch' off"
+
+		# Reset ADC input routing
+		cset "name='RECMIXL BST2 Switch' off"
+		cset "name='RECMIXR BST3 Switch' off"
+	]
+
+	Value {
+		TQ "VoiceCall"
+	}
+}
+
+SectionDevice."Earpiece" {
+	Comment "Internal Earpiece"
+
+	ConflictingDevice [
+		"Headphones"
+		"Speaker"
+	]
+
+	EnableSequence [
+		cset "name='SPOL MIX SPKVOL L Switch' on"
+		# Send right channel to left as it's mono only
+		cset "name='SPOL MIX SPKVOL R Switch' on"
+		cset "name='Speaker Channel Switch' on"
+		cset "name='Speaker L Playback Switch' on"
+	]
+
+	DisableSequence [
+		cset "name='Speaker Channel Switch' off"
+		cset "name='Speaker L Playback Switch' off"
+	]
+
+	Value {
+		PlaybackPriority 200
+		PlaybackPCM "hw:${CardId}"
+		PlaybackMixerElem "Speaker"
+		PlaybackVolume "Speaker Playback Volume"
+		PlaybackMasterElem "DAC1"
+	}
+}
+
+SectionDevice."Speaker" {
+	Comment "Internal Speaker"
+
+	ConflictingDevice [
+		"Earpiece"
+		"Headphones"
+	]
+
+	EnableSequence [
+ 		cset "name='HPO MIX HPVOL Switch' on"
+		cset "name='HP Channel Switch' on"
+		cset "name='HP R Playback Switch' on"
+		cset "name='Internal Speaker Switch' on"
+	]
+
+	DisableSequence [
+		cset "name='Internal Speaker Switch' off"
+		cset "name='HP Channel Switch' off"
+		cset "name='HP R Playback Switch' off"
+	]
+
+	Value {
+		PlaybackPriority 100
+		PlaybackPCM "hw:${CardId}"
+		PlaybackMixerElem "HP"
+		PlaybackVolume "HP Playback Volume"
+		PlaybackMasterElem "DAC1"
+	}
+}
+
+SectionDevice."Headphones" {
+	Comment "Headphones"
+
+	ConflictingDevice [
+		"Earpiece"
+		"Speaker"
+	]
+
+	EnableSequence [
+		cset "name='HPO MIX HPVOL Switch' on"
+		cset "name='HP Channel Switch' on"
+		cset "name='HP R Playback Switch' on"
+	]
+
+	DisableSequence [
+		cset "name='HP Channel Switch' off"
+		cset "name='HP R Playback Switch' off"
+	]
+
+	Value {
+		PlaybackPriority 300
+		PlaybackPCM "hw:${CardId}"
+		JackControl "Headphones Jack"
+		PlaybackMixerElem "HP"
+		PlaybackVolume "HP Playback Volume"
+		PlaybackMasterElem "DAC1"
+	}
+}
+
+SectionDevice."Mic" {
+	Comment "Internal Microphone"
+
+	ConflictingDevice [
+		"Headset"
+	]
+
+	EnableSequence [
+		cset "name='Stereo ADC MIXL ADC2 Switch' on"
+	]
+
+	DisableSequence [
+		cset "name='Stereo ADC MIXL ADC2 Switch' off"
+	]
+
+	Value {
+		CapturePriority 100
+		CapturePCM "hw:${CardId}"
+		CaptureMixerElem "ADC"
+		CaptureVolume "ADC Capture Volume"
+		CaptureSwitch "ADC Capture Switch"
+	}
+}
+
+SectionDevice."Headset" {
+	Comment "Headset Microphone"
+
+	ConflictingDevice [
+		"Mic"
+	]
+
+	EnableSequence [
+		cset "name='Stereo ADC MIXL ADC1 Switch' on"
+	]
+
+	DisableSequence [
+		cset "name='Stereo ADC MIXL ADC1 Switch' off"
+	]
+
+	Value {
+		CapturePriority 200
+		CapturePCM "hw:${CardId}"
+		JackControl "Headphones Jack"
+		CaptureMixerElem "ADC"
+		CaptureVolume "ADC Capture Volume"
+		CaptureSwitch "ADC Capture Switch"
+	}
+}
@@ -0,0 +1,81 @@
+# Maintainer: Martijn Braam <martijn@brixit.nl>
+
+pkgname=linux-pine64-pinephonepro
+pkgver=5.17.9
+pkgrel=0
+pkgdesc="Mainline kernel for the pinephone pro"
+arch="aarch64"
+_flavor="${pkgname#linux-}"
+url="https://kernel.org"
+license="GPL-2.0-only"
+options="!strip !check !tracedeps
+	pmb:cross-native
+	pmb:kconfigcheck-anbox
+	pmb:kconfigcheck-nftables
+	pmb:kconfigcheck-containers
+	pmb:kconfigcheck-zram
+	"
+makedepends="
+	bison
+	findutils
+	flex
+	gmp-dev
+	gzip
+	linux-headers
+	mpc1-dev
+	mpfr-dev
+	openssl-dev
+	perl
+	postmarketos-installkernel
+	rsync
+	xz
+	"
+
+case "$CARCH" in
+	aarch64*) _carch="arm64" ;;
+	arm*) _carch="arm" ;;
+esac
+
+# Source
+_config="config-$_flavor.$CARCH"
+case $pkgver in
+	*.*.*)	_kernver=${pkgver%.0};;
+	*.*)	_kernver=$pkgver;;
+esac
+source="
+	https://gitlab.com/pine64-org/linux/-/archive/ppp-$pkgver/linux-ppp-$pkgver.tar.gz
+	config-$_flavor.aarch64
+	"
+builddir="$srcdir/linux-ppp-$pkgver"
+
+prepare() {
+	default_prepare
+	cp "$srcdir/config-$_flavor.$CARCH" .config
+}
+
+build() {
+	unset LDFLAGS
+	make ARCH="$_carch" CC="${CC:-gcc}" \
+		KBUILD_BUILD_VERSION="$((pkgrel + 1 ))"
+
+}
+
+package() {
+	mkdir -p "$pkgdir"/boot
+	make zinstall modules_install dtbs_install \
+		ARCH="$_carch" \
+		INSTALL_MOD_PATH="$pkgdir" \
+		INSTALL_MOD_STRIP=1 \
+		INSTALL_PATH="$pkgdir"/boot \
+		INSTALL_DTBS_PATH="$pkgdir"/boot/dtbs-$_flavor
+	rm -f "$pkgdir"/lib/modules/*/build "$pkgdir"/lib/modules/*/source
+
+	install -D "$builddir"/include/config/kernel.release \
+		"$pkgdir"/usr/share/kernel/$_flavor/kernel.release
+}
+
+
+sha512sums="
+9508e0947a242f83b803e2667247c7a46aa9f602926096f8a98fa90ace297b4be6cd153eb75820c44d8dc2d94d1994560402e93dc2f771ad1719fc4f10c799e2  linux-ppp-5.17.9.tar.gz
+1b48dadb51fc17d80cabaa231f546cdb29d463eceed6ac051ddefb937412e51e93a25ff955120bd072767aadbffe58848b6a1992dd33f1b7cd5e7b579d302612  config-pine64-pinephonepro.aarch64
+"
@@ -0,0 +1,43 @@
+From 517ac0278347e1127bb7ba855c75cffee3f56204 Mon Sep 17 00:00:00 2001
+From: Oliver Smith <ollieparanoid@postmarketos.org>
+Date: Mon, 11 Jul 2022 08:05:11 +0200
+Subject: [PATCH] increase timeout for PartitionJob: 10 min
+
+Increase the PartitionJob's timeout from 2 min to 10 min, as there was
+an report of hitting the timeout with the PinePhone Pro's 128 GiB eMMC.
+
+Related: https://gitlab.com/postmarketOS/pmaports/-/merge_requests/3280#note_1021536268
+---
+ modules/mobile/PartitionJob.cpp | 2 +-
+ modules/mobile/wait.qml         | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/modules/mobile/PartitionJob.cpp b/modules/mobile/PartitionJob.cpp
+index 38ca1ae..db2e5bb 100644
+--- a/modules/mobile/PartitionJob.cpp
+++ b/modules/mobile/PartitionJob.cpp
+@@ -118,7 +118,7 @@ PartitionJob::exec()
+         const QString pathRoot = "/";
+ 
+         ProcessResult res
+-            = System::runCommand( System::RunLocation::RunInHost, args, pathRoot, stdInput, chrono::seconds( 120 ) );
+            = System::runCommand( System::RunLocation::RunInHost, args, pathRoot, stdInput, chrono::seconds( 600 ) );
+         if ( res.getExitCode() )
+         {
+             return JobResult::error( "Command failed:<br><br>"
+diff --git a/modules/mobile/wait.qml b/modules/mobile/wait.qml
+index 9bf561d..0978764 100644
+--- a/modules/mobile/wait.qml
+++ b/modules/mobile/wait.qml
+@@ -38,7 +38,7 @@ Page
+             anchors.topMargin: 150
+             wrapMode: Text.WordWrap
+             text: "Formatting and mounting target partition. This may" +
+-                  " take up to two minutes, please be patient."
+                  " take up to ten minutes, please be patient."
+             width: 500
+         }
+     }
+-- 
+2.30.2
+
@@ -0,0 +1,118 @@
+# Forked from Alpine to temporarily add a patch to increase timeout. Remove
+# this fork and update the alpine package once the PR is merged and a new
+# calamares-extensions release is tagged.
+# https://github.com/calamares/calamares-extensions/pull/20
+
+# Do not change arch to noarch, until this bug is resolved:
+# https://gitlab.alpinelinux.org/alpine/abuild/-/issues/10022
+pkgname=calamares-extensions
+pkgver=1.2.1
+pkgrel=2
+# armhf blocked by qt5-qtdeclarative
+# ppc64le, s390x and riscv64 blocked by qt5-qtwebengine -> calamares
+arch="all !armhf !ppc64le !s390x !riscv64"
+url="https://github.com/calamares/calamares-extensions"
+pkgdesc="Calamares Branding and Module Examples"
+license="GPL-3.0-or-later"
+makedepends="
+	calamares-dev
+	qt5-qtsvg-dev
+	qt5-qtdeclarative-dev
+	"
+source="
+	https://github.com/calamares/calamares-extensions/releases/download/v$pkgver/calamares-extensions-$pkgver.tar.gz
+	0001-increase-timeout-for-PartitionJob-10-min.patch
+	"
+options="!check" # has no tests
+
+# Modules and brandings to build:
+# https://github.com/calamares/calamares-extensions/tree/calamares/modules
+# https://github.com/calamares/calamares-extensions/tree/calamares/branding
+_modules="
+	mobile
+	"
+_brandings="
+	default-mobile
+	"
+
+for i in $_modules; do
+	subpackages="$pkgname-mod-$i:_module $subpackages"
+done
+for i in $_brandings; do
+	subpackages="$pkgname-brand-$i:_branding $subpackages"
+done
+
+# Check if one module/branding is enabled
+# $1: name of module/branding
+# $2: either $_modules or $_brandings
+is_enabled() {
+	local i
+	for i in $2; do
+		[ "$i" = "$1" ] && return 0
+	done
+	return 1
+}
+
+# Check if string $1 is in CMakeLists.txt and comment it out
+comment_out() {
+	sed -i "s~$1~#&~g" "$builddir/CMakeLists.txt"
+}
+
+prepare() {
+	default_prepare
+
+	local i
+
+	msg "disabled modules:"
+	cd "$builddir/modules"
+	for i in *; do
+		if ! [ -d "$i" ] || is_enabled "$i" "$_modules"; then
+			continue
+		fi
+		echo " - $i"
+		comment_out "calamares_add_module_subdirectory( modules/$i "
+	done
+
+	msg "disabled brandings:"
+	cd "$builddir/branding"
+	for i in *; do
+		if ! [ -d "$i" ] || is_enabled "$i" "$_brandings"; then
+			continue
+		fi
+		echo " - $i"
+		comment_out "calamares_add_branding_subdirectory( branding/$i "
+	done
+}
+
+build() {
+	cmake -B build \
+		-DCMAKE_BUILD_TYPE=MinSizeRel \
+		-DCMAKE_INSTALL_PREFIX=/usr \
+		-DCMAKE_INSTALL_LIBDIR=lib
+	cmake --build build
+}
+
+_module() {
+	local module=${subpkgname##calamares-extensions-mod-}
+	local path="usr/lib/calamares/modules"
+
+	mkdir -p "$subpkgdir/$path"
+	mv "$pkgdir/$path/$module" "$subpkgdir/$path/$module"
+}
+
+_branding() {
+	local branding=${subpkgname##calamares-extensions-brand-}
+	local path="usr/share/calamares/branding"
+
+	mkdir -p "$subpkgdir/$path"
+	mv "$pkgdir/$path/$branding" "$subpkgdir/$path/$branding"
+}
+
+package() {
+	DESTDIR="$pkgdir" cmake --install build
+}
+
+sha512sums="
+dae305835656b88fd17a306c21ec49b904ee77d9db34144d29702fb4de9f7cb3eed93e694e0d047722b4ff949f44e99b0e2054eb2d5b4a1645b2e5ead8e81893  calamares-extensions-1.2.1.tar.gz
+bf5ba15b6a1a59540f826274056b2aa4d71242882d89ae161babee542c0bdc5c85ffd348957918e96f1cfb93b6007a1b3c5aa0894985a8a80babd7c3907c45f9  0001-increase-timeout-for-PartitionJob-10-min.patch
+"