Disable debug options and SMP, and remove support for other platforms.
Unixbench reports a speedup for process creation and syscalls, from
Process Creation 126.0 1043.8 82.8
System Call Overhead 15000.0 235497.3 157.0
to
Process Creation 126.0 1826.7 145.0
System Call Overhead 15000.0 421030.2 280.7
Updated the kernel to the latest version from LineageOS [1] (branch
`cm-14.1`), copied their configuration file and updated it according
to `pmbootstrap kconfig check`. Previous kernel was from `cm-12.1`
branch.
Fixed firmware package. Switched firmware source to
LineageOS/TheMuppets and install only the Wi-Fi firmware, but into the
correct directory. Previously all available firmware was simply copied
into wrong directories.
[1] https://github.com/LineageOS/android_kernel_htc_msm8960
[ci:skip-build] already built successfully in CI
plasma-nm-mobile is already a dep of plasma-phone-components
ofono is already a dep of plasma-phone-components
ofono-openrc already gets pulled in automatically through openrc and
ofono
networkmanager is already pulled in by plasma-nm-mobile
qt5-qtvirtualkeyboard has been replaced by maliit ages ago
[ci:skip-build] already built successfully in CI
- switch sources to official repo https://source.denx.de/u-boot
- use tag v2021.07
- extract patches from pine64-org
- enable DMA transfers from eMMC and mSD (u-boot from Megi)
[ci:skip-build] already built successfully in CI
The flavor string was naively parsed using sed by removing everything
before the first hyphen, this breaks for -rc kernels. Instead lets glob
/usr/share/kernel for the installed kernel flavor. This will also
prevent the kernel being flashed if the running kernel has a different
localversion than the updated one.
[ci:skip-build] already built successfully in CI
Allow users in group "input" to control the tm2-touchkey leds.
Additionally correcting the udev rule for disabling the tm2-touchkey leds by default.
[ci:skip-build] already built successfully in CI
Add ttyescape, a script and triggerhappy configuration to allow mobile device
users to access and use a shell without having to plug in to a computer.
One of the largest limitations with a mobile device is the lack of keyboard, for
mainstream OSs like Android and iOS, this is a non-issue as the whole OS stack
is built to automatically recover in case of a crash / hang, hiding the internal
state of affairs from users and making use of careful design to minimise the
impact. When bringing Linux to mobile, we carry not only the benefits of the
Linux desktop but also it's limitations. In the event that your desktop manager
goes haywire or hangs completely, or your graphics drivers get unhappy, the
ability to quickly jump to a tty and start killing bad behaving programs or
reset your display manager is one that most of us take for granted. But when
hit by similar errors on a mobile device there is no such recourse available,
users either have to reboot and hope that the issue doesn't occur again, or pull
out a laptop and pull up a shell (assuming ssh is enabled and the rndis
interface comes up).
ttyescape proposes to solve this issues by pieceing together several already
available tools, notably:
- triggerhappy, a tool used to perform actions when
certain buttons or key combinations are pressed with no dependencies on the
display manager in use.
- fbkeyboard, a framebuffer keyboard for tty's, it
renders on top of the current tty and uses the device touchscreen as input.
This device runs on linux-postmarketos-rockchip which at the moment of
writing is 5.13.0 with (only) 6 patches applied, so close-to mainline.
I personally use 2 of these devices with postmarketOS installed daily as
my homeserver setup and it has worked really well. It's also a good
target to run Plasma Bigscreen on as a TV setupbox
gzip results in a boot.img that's too big (over 8 MB) for e.g.
samsung-i9300, so let's replace it with something that produces
smaller kernels. With this, the entire boot.img is 6,3 MB (down
from 8MiB, or 8.5458944 MB) which leaves plenty of space on the
8 MB partition and prevents the recovery from being overwritten
when this kernel is flashed.
Tested and works on samsung-i9300.
[ci:skip-build] already built successfully in CI
This provides a mobile-friendly music player in the default
installation which is something that's currently lacking.
[ci:skip-vercheck]: _pmb_recommends change doesn't need pkgrel bump
The networkmanager hotspot needs to have DHCP input enabled on the wifi
interfaces so the temporary dnsmasq instance can work. The
networkmanager backend is also switched to the nftables one so it can
create the ad-hoc hotspot forwarding/masquerade table.
Proper fix for the monospace fonts seen when postmarketos-ondev is
installed without also installing osk-sdl. This doesn't happen anymore
with pmbootstrap install --ondev, because it will always pull in osk-sdl
again for other reasons. However, since postmarketos-ondev is using this
font, let's directly depend on it instead of having it pulled in as side
effect of also having osk-sdl installed.
And extend bootloader CMDLINE per default, giving us the option to
change the CMDLINE both via the kernel config and from samsung's
S-BOOT shell.
Note: the default console in exynos_defconfig (which this config is
based on) is ttySAC1, but all midas devices uses ttySAC2, so set it to
ttySAC2 instead. Also remove all other variables. They are not needed,
and (at least) root=/dev/ram0 seem to prevent us from booting pmos.
[ci:skip-build] already built successfully in CI
uim-selection has "after *" in it's dependencies to make sure the
theoretical up to ~1min delay can't be observed. Unfortunaely this
causes incorrect dependencies ordering if one of other services depends
on ofono or modemmanager. Drop "after *" so modem can always be started
properly.
NymphCast is a FOSS Chromecast replacement (not a drop-in one though)
and allows you to "cast" audio and video to your device running the
nymphcast server. Plasma Bigscreen seems like an ideal use-case for this
so let's install and launch it by default. People can always uninstall
it anyways
Merged in mainline since 5.9-rc2-next-grate:
- all previously applied patches specific for Tegra and Nexus 7
New features, not merged yet in mainline (only in -next-grate):
- improved power management
- implemented USB OTG
New configuration options
- enable F2FS support (incl. compression), which leads to prolonging
eMMC life
Tested on E1565.
Signed-off-by: David Heidelberg <david@ixit.cz>
This allows using lm_sensors to read temperature data on the pinebook
pro (and probably other devices too)
❯ sensors
gpu_thermal-virtual-0
Adapter: Virtual device
temp1: +41.1°C (crit = +95.0°C)
tcpm_source_psy_4_0022-i2c-4-22
Adapter: rk3x-i2c
in0: 5.00 V (min = +5.00 V, max = +5.00 V)
curr1: 2.50 A (max = +2.50 A)
cw2015_battery-i2c-4-62
Adapter: rk3x-i2c
in0: 4.24 V
curr1: 0.00 A
cpu_thermal-virtual-0
Adapter: Virtual device
temp1: +47.5°C (crit = +95.0°C)
nvme-pci-0100
Adapter: PCI adapter
Composite: +31.9°C (low = -273.1°C, high = +80.8°C)
(crit = +80.8°C)
Sensor 1: +31.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +37.9°C (low = -273.1°C, high = +65261.8°C)
[ci:skip-build] Already built on CI
5.13.5 had some rockchip-related fixes in the changelog, so I figured
why not upgrade to it.
These patches from Manjaro seem to be the bare minimum required to get
usb-c charging and device peripherial support working again (external
display still doesn't work)
[ci:skip-build] already built successfully in CI
There's a generic udev rule to set group ownership of backlights to
'video', but it only runs on the ADD action, which seems to be too
late(?) since the backlight device is never owned by 'video' on boot.
This rule will run on CHANGE too, which might be overkill but seems to
get the job done. It's now possible to set the backlight brightness on
the PBP as a normal user.
llvm was left over from Martijn's efforts to reduce the kernel size
The drivers for external DP are enabled here, but all patches from
manjaro that deal with DP/typec alt mode, etc are dropped since they do
not solve anything on their own and may cause display instability
issues...
[ci:skip-build]: already built successfully in CI
prevent the creation of a fake NUMA node
saving a few CPU cycles each DRAM access:
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at ...
[ 0.000000] NUMA: NODE_DATA [mem 0xff9c2100-0xff9c3fff]
if you boot on QEMU make sure to review vCPU topology:
set socket to 1
This is needed to get ethernet working on most 64-bit sunxi boards.
Basically just synced with armv7 config a bit.
[ci:skip-build] already built successfully in CI
Now that CPU scaling is enabled, there is no need to disable the big cluster,
which was hurting performance before by staying at 19.2 MHz. Remove maxcpus=2
from the command line arguments.
[ci:skip-build] Already built successfully on CI
Upgrade to 5.13.0 mainline and disable staging drivers.
Staging drivers are not used by this device and cause
build failures [1].
[1] https://github.com/tobetter/linux/issues/29
[ci:skip-build]: already built successfully in CI
Install obex-capabilities and a modified DBus Service
for BlueZ's obexd when BlueZ OBEX support is installed.
UIs depending on BlueZ are now also depending on
bluez-obexd for OBEX support through various MRs at Alpine.
Support the downstream kernel and a close-to-mainline fork. Waveform
data for the eInk display and the Wi-Fi driver are not included yet.
Everything else should work.
Anbox, nftables, and containers aren't set up for now because I'm not
sure how useful Anbox would be on devices using this SoC given that most
(all?) of them have around 1 GB of RAM, aren't very fast, and I have
heard that Anbox isn't very well-Asupported on ARMv7. As for nftables,
I don't want debug it at this time in case breaks something. Setting up
container support made the phone hang while booting, however that might
have been due to that I only booted the new kernel without getting the
new modules in the rootfs.
[ci:skip-build] already built successfully in CI
Pulseaudio is used by other graphical UIs to manage audio, so having it
installed for sway is useful for having audio working "out of the box"
[ci:skip-build] already built successfully in CI
The update to Linux v5.13.1 also includes updating the haptics driver
to the latest one posted to the mailing lists, which was renamed to
qcom-spmi-haptics. Rename the udev rule for this driver and update the
driver name in it.
[ci:skip-build] already built successfully in CI
This package used to be installed through osk-sdl, but now osk-sdl is only
installed when FDE is enabled, and so when it is not enabled the system has no
fonts to use, which means UIs like Sway and Weston have broken fonts. This
commit fixes the issue.
[ci:skip-build] already built successfully in CI
This adds a new 'UI' that includes networking support (network manager), firewall (by way
of postmarketos-base-ui), and anything else that will give a basic,
working image without any graphical UI.
The intention is for bpo to build this instead of the 'none' UI. 'none'
UI will continue to be around for mainlining and testing purposes.
* Add the fusb302 module in initfs for the keyboard and touchpad
* Add cmdline params for improving stability
fw_devlink was switched on by default in kernel 5.13, and is rumored to
have issues.
The others might improve nvme stability.
* Disable wifi powersave
* Clean up modules in the deviceinfo
This switches the config over to one based on Alpine's linux-gru which
is for an rk3399 chromebook. It produces way smaller kernels and has
more general purpose hardware support.
The udev file "20-tm2-touchkey-leds.rules" disables the leds of
tm2-touchkey by default because they are in an unconfigured state.
The udev file "95-rt5033-battery-refresh.rules" triggers a refresh
of the rt5033-battery information within UPower 5 secs after
initialization. This avoids a wrong battery icon after boot.
The udev file "50-firmware.rules" was moved from /etc/udev/rules.d
to /lib/udev/rules.d.
Related: https://wiki.postmarketos.org/wiki/Packaging#Device_specific_quirks
The ODROID HC2 device must have its boot partition
on a microSD card while the rootfs can be on an external HDD.
Provide a script to transfer the rootfs and update the U-boot script.
[ci:skip-build] already built successfully in CI
- Use common firmware package for Samsung zero devices also for zerofltexx
- Fix Wifi firmware paths
- Fix display colors (in sxmo; weston seemed OK before)
- Fix "alignment fault" error on ALSA sound output by compiler flag.
[ci:skip-build] already built successfully in CI
Now that there is a "unmaintained" category, readd huawei-kiwi
downstream (which got replaced in !1826 (merged)).
[ci:skip-build] already built successfully in CI
Start NetworkManager on boot to autoconfigure network devices plugged
into the USB port as well.
Drop /etc/network/interfaces to allow NetworkManager manage all
interfaces.
[ci:skip-build] already built successfully in CI
Based on Minecrell work at:
https://gitlab.com/Minecrell/pmaports/-/tree/alcatel-idol347-downstream
adapted smb1360 shared patches for idol347 downstream tree,
and added his idol347-like-mainline.patch gist which changes downstream DT
to mimic sane mainline settings for easy battery driver dump comparison.
This branch includes a patch to resolve a deadlock when Phosh is
starting up. This patch was merged in aports edge.
The rest of the patches in this branch are minor fixes, so I don't
expect any regressions.
fixes#1142
[ci:skip-build] already built successfully in CI
[ci:ignore-count]
[ci:skip-vercheck] needed for the postmarketos-ui-* packages in this
series
[ci:skip-build] already built ui-* packages in CI, and device pacakges
are just trivial deviceinfo change (manually built some just to verify)
Adds pmb:gpu-accel option to Phosh, Plasma Mobile/Bigscreen, Sway,
Glacier and Kodi APKBUILDs to hide the UIs at `pmbootstrap init`
for devices without GPU acceleration support.
Related: pmbootstrap!2043
[ci:skip-build]: already built successfully in CI
[ci:skip-vercheck]
Should work same as before.
Slightly tweaked kernel config options:
* default cpufreq governor is now "conservative" instead of "performance", which should be better for devices running on battery. Not that it matters, MSM8974 does not have cpufreq support anyway.
* enabled CONFIG_ARM_QCOM_SPM_CPUIDLE, which was missing! At least some cpuide is better than none at all.
* 2 missing options for nftables: CONFIG_IP6_NF_FILTER, CONFIG_IP6_NF_TARGET_REJECT
* few missing options for wg-quick: CONFIG_IPV6_MULTIPLE_TABLES, CONFIG_IP_MULTIPLE_TABLES, CONFIG_IP6_NF_RAW, CONFIG_IP_NF_RAW
WWAN subsystem is not enabled.
BAM-DMUX upgraded to version "v3" (subnode of modem remoteproc)
Mark kernel package as supporting anbox, containers (in addition to nftables)
[ci:skip-build] Already built successfully twice on CI
Phosh 0.12.0 introduces filtering when the device is of a mobile type
and the app is not explicitly 'adaptive'. This means a lot of apps that
might otherwise work ok-ish are gone from the list.
This change disables the filtering for now.
Currently, shut down and reboot as a user does not work (sudo shutdown
from terminal required). polkit-elogind needs to be installed. lxpolkit
is not needed.
Some msm8916 devices, primarily with two sim slots, require slot
to be selected. Install uim-selection script for all msm8916 devices
with modem enabled.
[ci:skip-build] already built successfully in CI
On some devices, primarily with two sim slots, modem doesn't choose
the sim automatically. Add an init script that would detect in which
slot the sim is present and configure the modem to use it.
This adds a very basic openrc runscript that sets the power state on
/dev/nvme0 to level 2, which seems(?) to be the lowest operational power
state based on some cursory internet searching (and querying the nvme
drives I have, Samsung EVO and Pro)
The drive path is hard coded, but could be made configurable later on. I
basically wanted to get something in pmaports quickly, since this power
stuff is a major source of instability for me and probably others too
who add nvme drives to this device.
This:
1. fixes the UI not showing up on boot by installing polkit-elogind
2. makes for fancy password popups when root rights are needed rather
than just fail silently
Move the package back from aports to pmaports and fix fall out from
postmarketos-base-ui related breakage:
* add the subset of depends from postmarketos-base-ui that are used in
postmarketos-ondev
* upgrade to postmarketos-ondev 0.7.1, where I made it compatible with
using the default tinydm config (not just the one overridden in
postmarketos-base-ui-tinydm)
Reasoning for moving it from alpine to pmaports, in line with our new
guidelines (that were written after the package was moved to aports):
* has postmarketOS branding
* enables services in post-install (similar to postmarketos-ui-* packages)
Related: https://wiki.postmarketos.org/wiki/Packaging#Should_my_package_be_in_postmarketOS_or_Alpine.3F
* use tinydm instead of lightdm
* set default term to foot, as alacritty needs a recent opengl version
(issue 984)
* override sway config to actually use foot (there is no
sway-sensible-terminal and upstream isn't interested in adding it)
* set the pmOS wallpaper in the overridden sway config
* add a subpackage that allows changing $mod to Alt, so it's easier to
test this in QEMU while running i3/sway on the host with $mod set to
Mod4
* re-enable previously disabled architectures
* set myself as maintainer
1 does fit the lock screen better, but 1.2 works better overall.
Some things are tiny with 1. 1.2 fits the lock screen decently and
still provides decently sized user interface elements.
Downstream kernel made by Corellium which enables the iPhone 7 to boot.
This is the continuation of my work for a PostmarketOS port based on
@MartijnBraam kernel and devices packages.
PogoOS by the Checkra1n team is used to boot the Linux kernel. Further
instructions will be available in the PostmarketOS Wiki page.
[ci:skip-build] already built successfully in CI
I sometimes test DB410c via mainline U-Boot, which wants to have the
DTB in the "second" part of the Android boot image. Otherwise it works
fine. Include it there additionally to simplify this.
[ci:skip-build] already built successfully in CI
On top of the firmware we already have, we also need device-specific
modem firmware. Use script from firmware-motorola-potter(credit goes to
Sireesh Kodali). Also imitate the logic in firmware-motorola-potter.
Currently, this only sets Firefox to run in Wayland mode, but in the
future it might be used to make e.g. SDL applications run in Wayland
mode.
SDL applications are not set to run in Wayland mode right no as
SDL 1.2 uses the same environment variable as SDL 2.0 for
controlling video driver (SDL_VIDEODRIVER) and SDL 1.2 does not
support Wayland and crashes if an invalid value is provided for
SDL_VIDEODRIVER, and as such setting SDL_VIDEODRIVER=wayland
globally would break all SDL 1.2 applications. This will however be
fixed once SDL 1.2 is replaced by sdl12-compat in Alpine, as
sdl12-compat implements the SDL 1.2 API and ABI via SDL 2.0 and as
such supports Wayland. As such, once this happens we can start
setting SDL_VIDEODRIVER=wayland.
[ci:skip-build] already built successfully in CI
This causes issues with some programs, chiefly that gsd-xsetttings
does not start properly. GDK_BACKEND=wayland is only really
necessary to make Firefox run in Wayland mode anyway - other GTK 3/4
apps use it automatically. Firefox will be set to use Wayland via a
following commit.
Having RMTFS at runlevel boot makes it start the modem too fast and causes
crashes. Move it to runlevel default with a post-install.
[ci:skip-build] already built successfully in CI
The Huawei Ascend G7 is based on Qualcomm MSM8916 and therefore makes
use of linux-postmarketos-qcom-msm8916 as a close-to-mainline kernel.
Initially supported features:
- USB
- Storage (eMMC, SD card)
- Display
- Touchscreen, Buttons, Vibrator
- Notification LED
- WiFi/Bluetooth
- Accelerometer, Magnetometer, Proximity
- Audio
- NFC
The modem needs more work to work around strange Huawei firmware mess.
Note that the Huawei shipped an outdated firmware version that does
not support booting aarch64 kernels (like used in this device port).
However, the device does not verify firmware signatures so it is
possible to flash firmware from other devices. This is mostly
described in the wiki, but unfortunately it's quite complex.
However, the aarch64 version of linux-postmarketos-qcom-msm8916
receives much more testing so I would like to avoid adding more
armv7 MSM8916 devices unless absolutely necessary.
For pointercal:
Screen dimension 720x1280
Touchscreen dimension (reported by evtest) 1100x1900
720/1100*65536 = ~42896
1280/1900*65536 = ~44151
Offset doesn't seem to be needed.
[ci:skip-build] already built successfully in CI
- Update to Linux 5.13
- Upstreamed many more patches
- Various cleanup to BAM-DMUX driver to prepare for upstreaming
- Enable support for virtualization/KVM via https://github.com/msm8916-mainline/qhypstub
- Probably many other things I forgot :)
- Add tons of kernel config options for containers and nftables
- Add WireGuard to kernel config
Device changes:
- huawei-g7: Initial support for Huawei Ascend G7
- USB
- Storage (eMMC, SD card)
- Display
- Touchscreen, Buttons, Vibrator
- Notification LED
- WiFi/Bluetooth
- Accelerometer, Magnetometer, Proximity
- Audio
- NFC
- lg-c50: Initial support for LG Leon LTE
- USB
- Storage (eMMC, SD card)
- Buttons
- WiFi/Bluetooth
- Vibrator
- Display
- longcheer-l8150 (wileyfox-crackling): Fix proximity sensor
- motorola-surnia: Add audio and modem
- samsung-j5nlte: Add buttons
- samsung-j5xlte: Initial support for Samsung Galaxy J5 (2016)
- USB
- Storage (eMMC, SD card)
- Buttons
- samsung-serranovelte: Add USB-OTG detection
[ci:skip-build] already built successfully in CI
My engineering prototype 1 Gb pinetab is close to unusable,
so I can't use it to test pmOS. Also, PINE64 is no longer
selling these devices, and the ones that were sent previously
to some developers use different display panel anyway.
Martijn Braam and Dylan Van Assche agreed to maintain it.
[skip ci]
This replaces the dependency on osk-sdl with a dependency on a
postmarketos-fde-unlocker virt. package
osk-sdl and its dependencies are also added contitionally to the initfs,
based on whether the osk-sdl exe is installed in the rootfs
Also see:
https://gitlab.com/postmarketOS/pmbootstrap/-/merge_requests/2066
Commits cfb5d41b and ead17254 updated the default battery levels for
warnings and actions in the pinephone and the pinetab. Since then,
the chances of the phone dying for lack of battery power have completely
dissapeared. However, the battery icon in phosh was never updated to show
a "caution" battery level. The value was hardcoded and ignored the setting
in the config file. This commit fixes that issue
This rule is installed by default, since users that need usb inet won't
have an easy way to install a subpackage.
This is meant to facilitate:
https://wiki.postmarketos.org/wiki/USB_Internet
The old rule would result in nftables failing to load if the iface
doesn't exist. Using `iifname` will match on any future ifaces if they
don't exist when the firewall starts.
1. Fixes touchscreen input not working in Poco F1 (Tianma variant) in osk-sdl
2. Basic dts support for Xiaomi Mi 8 Pro(Equuleus)
3. Basic dts support for LG G7 and LG V35
Missing '/' in aports path will make glob below invalid.
It will find 0 files and thus effectively skip all tests.
Construct full path using f-strings.
Double '/' in path that can be there if args.aports ends
with slash is harmless.
Anbox needs a specific set of nftables rules to allow incoming and
outgoing traffic. Anbox makes it easy to allow the specific traffic due
to the established `anbox0` bridge network interface.
UIs that depend on networkmanager also have an added dependency on
dnsmasq since this was removed from postmarketos-base
[ci:ignore-count] lots of packages, but no code compilation..
This makes venus load the right firmware on xiaomi-scorpio. It also has
re-enabled cpuidle in kconfig after it was mistakenly disabled in the last
update.
[ci:skip-build] already built successfully in CI
Based on downstream Android 7.0 kernel source from Huawei.
02_fix_undeclared_AUD_INET.patch is from huawei-alice
USB Networking, Touchscreen, USB OTG and Display work in xfce4.
Wifi just needs firmware, audio is broken.
Other parts haven't been tested yet.
The close-to-mainline kernel removed the generic-dsi driver in favor of
normal panel drivers. Also the panel drivers are now built in. Reflect that.
Also reflect the changes of firmware-motorola-ocean in
device-motorola-ocean_nonfree-firmware.
[ci:skip-build] Already built on CI in MR
Workaround for https://source.puri.sm/Librem5/linux-next/-/issues/303.
It seems worth sacrificing some power savings for a modem that won't
disappear, at least until the above issue is fixed.
[ci:skip-build]: already built successfully in CI
Shellcheck 0.7.2 has a change that gives many error conditions their own
SC30** codes, instead of including them in SC2039. This updates the
scripts in this package that "disable SC2039" to disable the new code.
New codes added in shellcheck: cfd68ee0c2ebfd0ab08a1d4bf628162b454dc207
At the moment, oFono/MM are usually stopped after rmtfs on shutdown.
This does not make sense, since the modem managed by oFono/MM will
disappear once rmtfs is stopped. Add a "before ofono modemmanager"
to make sure that OpenRC will stop oFono/MM before rmtfs on shutdown.
This may or may not fix some occasional hangs during shutdown,
but it definitely makes it possible for oFono/MM to shutdown cleanly.
From fb7d03c7ea97fc785327fd00b302c7ac17779837 Mon Sep 17 00:00:00 2001
From 953779008f2caa78c55f80c2d6096bf627080016 Mon Sep 17 00:00:00 2001
From: Ariadne Conill <ariadne@dereferenced.org>
Date: Fri, 21 Aug 2020 06:52:07 +0000
Subject: [PATCH] Don't declare asprintf if defined as a macro.
@@ -24,5 +24,5 @@ index 141cb886a85..fa0e78eb62f 100644
/* Like asprintf but allocates memory without fail. This works like
xmalloc. */
--
2.31.0
2.31.1
Loaded 100 of 810 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Oliver Smith
Clayton Craft
Siddharth Manthan
Timotej Lazar
Jonas Heinrich
link2xt
Bart Ribbers
Bobby The Builder
bademux
Caleb Connolly
Jakob Hauser
Newbyte
afeuerstein
Martijn Braam
Henrik Grimler
Yassine Oudjana
Nikita Travkin
Maarten van Gompel
David Heidelberg
pcworld
jenneron
Alex Xu (Hello71)
Ollie Reardon
Maxim Schwalm
Svyatoslav Ryhel
Richard Qian
Maxim Karasev
Raffaele Tranquillini
Uniformbuffer
Björgvin Ragnarsson
Yannick Ulrich
Luca Weiss
Ultracoolguy
Duje Mihanović
Dylan Van Assche
Alexey Minnekhanov
Stacy Harper
Akash Rawat
Dylan Van Assche
tim
Stefan
BO41
Sporos
Vincent Knecht
Anri Dellal
Danct12
Minecrell
Sönke Holz
Pablo Correa Gómez
Kai Parry
Joel Selvaraj
Alexey Minnekhanov
samuel norbury
CactiChameleon9
mimi89999
Sandelinos
Timon Baetz
Julian Braha
Max Buchholz