Compare commits

..
Author SHA1 Message Date
Caleb Connolly 95a9508b8b copy all modules if available
For development it can be helpful to include all kernel modules in the
initramfs and copy them to the rootfs during boot. Add support for this
directly in the initramfs.

This relies on the fact that development kernels include the git tag and
build number (incrementing) so 'uname -r' changes every time.

It's up to the user to manage deleting their old modules.

Opt-in to this behaviour by setting
deviceinfo_dev_kernel_copy_all_modules="true" in your deviceinfo file.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
2024-06-19 02:22:18 +02:00
Clayton Craft a2d30ae115 main/boot-deploy: upgrade to 0.16.1 (MR 5244)
Fixes:
        - flash_android_bootimg: check validate target partition size before flashing (MR 63)
        - copy target dtb to a temp directory for qcom and sprd dt.img types (MR 57)

Other:
        - ci: add integration test for exynos qcdt (MR 57)
        - ci: switch to unpackbooting from osm0sis (MR 57)

[ci:skip-build] already built successfully in CI
2024-06-18 15:29:38 -07:00
Clayton Craft 5fffa17b06 main/postmarketos-initramfs: explicitly depend on libinput-libs (MR 5242)
pma!5000 added a new implicit dependency on libinput, because it
specified libinput files in the initramfs file hook. mkinitfs considers
it fatal if it cannot find files listed in a file hook.

Later this could be 'optimized' by adding a -libinput subpkg and an
`install_if=libinput-libs` to add this file hook so it's not installed
everywhere... but the size increase isn't too much for UIs.. someone can
do this later.

> libinput-libs-1.26.0-r0 installed size:
> 476 KiB

This fixes a missing dependency problem where a UI (e.g. "none") doesn't
normally depend on libinput, and mkinitfs would fail because these files
were missing.
2024-06-18 14:23:29 -07:00
Stefan Hansson b0d8f91a79 device-samsung-t0lte: depend on minimal initramfs (MR 5241)
This device probably has a small boot partition where the big initramfs
won't fit, so use this.

[ci:skip-build]: already built successfully in CI
2024-06-18 22:39:55 +02:00
Stefan Hansson 1f5f37a2d0 device-samsung-t03g: depend on minimal initramfs (MR 5241)
This device probably has a small boot partition where the big initramfs
won't fit, so use this.
2024-06-18 22:39:55 +02:00
Stefan Hansson f290379828 device-samsung-p4note: depend on minimal initramfs (MR 5241)
This device has a small boot partition (8 MB). The big initramfs
won't fit.
2024-06-18 22:39:55 +02:00
Stefan Hansson ce48786034 device-samsung-m3: depend on minimal initramfs (MR 5241)
This device probably has a small boot partition where the big initramfs
won't fit, so use this.
2024-06-18 22:39:55 +02:00
Stefan Hansson 8ccbb8a864 device-samsung-lt01: depend on minimal initramfs (MR 5241)
This device probably has a small boot partition where the big initramfs
won't fit, so use this.
2024-06-18 22:39:55 +02:00
Stefan Hansson ed5b11da90 device-samsung-i9100: depend on minimal initramfs (MR 5241)
This device probably has a small boot partition where the big initramfs
won't fit, so use this.
2024-06-18 22:39:55 +02:00
Stefan Hansson 68af03bdf5 device-samsung-m0: depend on minimal initramfs (MR 5241)
This device has a small boot partition (8 MB). The big initramfs
won't fit.
2024-06-18 22:39:53 +02:00
Stefan Hansson 8cae59f47c device-samsung-m0-downstream: depend on minimal initramfs (MR 5241)
This device has a small boot partition (8 MB). The big initramfs
won't fit.
2024-06-18 22:39:47 +02:00
Stefan Hansson a1c6fec44b device-samsung-lt01wifi-downstream: depend on minimal initramfs (MR 5241)
This device probably has a small boot partition where the big initramfs
won't fit, so use this. And also reformat depends.
2024-06-18 22:11:30 +02:00
Caleb Connolly 7c98127746 postmarketos-initramfs: switch to udev and kmod (MR 5000)
mdev is slow and missing features, it also requires that we load all the
modules that we include at once making the boot process slower.

udev is required for unl0kr (and buffyboard), it can also load modules
on demand (and asynchronously). Making the boot process considerably
faster on devices, especially for generic images where we have lots of
drivers for different display panels in the initramfs.

Additionally, import full fat modprobe from the kmod package, this is
required to support compressed modules.

This brings us more in line with other distros and generally improves
compatibility.

If devices use broken kernel modules which don't correctly define
modalias', these drivers may not be loaded by udev. This should be fixed
by defining the missing modalias statements in the driver.

This also runs udev earlier in the init, so that display drivers are
loaded before the splash in case they are needed.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Co-authored-by: Clayton Craft <clayton@craftyguy.net>

[ci:ignore-count]
[ci:skip-build]: already built successfully in CI
2024-06-18 12:35:05 -07:00
Clayton Craft 54ef5cdf15 device-*: depend on initramfs-minimal for devices with small boot (MR 5000)
[ci:ignore-count]
2024-06-18 12:35:05 -07:00
Caleb Connolly dd28314ba2 postmarketos-initramfs: debug-shell 3.0 (MR 5000)
This incorprates the debug-shell functionality directly into the
initramfs, so it's no longer necessary to build and boot a custom
initramfs in order to debug your device.

Additionally, the behaviour of the debug-shell is entirely reworked, It
now creates an ACM serial gadget which can be accessed via any normal
terminal emulator (picocom, minicom, etc; or PuTTY on windows). Rather
than just invoking sh, the debug-shell now creates a respawning getty on
both the new virtual console and the active console (this will either be
the UART console or tty0/1).

It is necessary to spawn these shells via getty since the logging rework
means we can no longer assume that stdin/out/err reference a TTY.

In addition to the above, it is now possible to trigger a log dump by
holding volume up during boot. This can be useful for helping users
debug their devices if the issue doesn't result in a failure that can be
detected in the initramfs.

With these changes, the console-shell and debug-shell hook packages are
reduced to only adding the additional tools/features. console-shell is
still required for fbkeyboard, and debug-shell for the setup_usb_storage
tool.

Co-Developed-by: Clayton Craft <craftyguy@postmarketos.org>
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
2024-06-18 12:35:05 -07:00
Caleb Connolly f66238f045 postmarketos-initramfs: handle empty hooks dir (MR 5000)
For some reason globbing doesn't work properly for empty directories,
adjust the check in run_hooks to ensure the directory both exists and
contains something, otherwise we get an error about
"/hooks-cleanup/*.sh" not existing.

/ # mkdir blah
/ # for x in blah/*; do echo $x; done
blah/*
/ # touch blah/beep
/ # for x in blah/*; do echo $x; done
blah/beep

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
2024-06-18 12:35:05 -07:00
Caleb Connolly 5a27482c20 postmarketos-initramfs: depend on mdevd (MR 5000)
I somehow hit a case where this wasn't installed and
/lib/mdev/persistent-storage wasn't available. Let's just explicitly
depend on mdevd...

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
2024-06-18 12:35:05 -07:00
Caleb Connolly 51cde04a4b main/iskey: new aport (MR 5000)
iskey is a tiny tool that reports if any of the given keys are pressed.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
2024-06-18 12:35:05 -07:00
Caleb Connolly 118a30935e postmarketos-initramfs: mount subpartitions after hooks (MR 5000)
This step is the most likely to go wrong or have issues, and it has side
effects which can make it difficult to run multiple times on one boot.
Move it to after hooks so that e.g. when dropping to a debug shell, we
land before the first call.

This also makes booting to hooks a faster in many cases.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
2024-06-18 12:35:05 -07:00
Caleb Connolly 5dcb7aab62 postmarketos-initramfs: use dd to allocate logs image (MR 5000)
fallocate seems to cause some strange behaviour where the logs.img file
is treated like it's empty. Given it's small and in a ramdisk let's just
create it with dd instead.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
2024-06-18 12:35:04 -07:00
Caleb Connolly 709768214c postmarketos-initramfs: check if UDC is configured before clearing (MR 5000)
This fixes the annoying "sh: write error" and "Couldn't write to clear
UDC" messages that happen on every single boot.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
2024-06-18 12:35:04 -07:00
Caleb Connolly 75613d9f69 postmarketos-initramfs: make CONFIGFS global (MR 5000)
This variable is being used in more places, just make it global.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
2024-06-18 12:35:04 -07:00
Caleb Connolly 95b22138c4 postmarketos-initramfs: log to kernel ringbuffer (MR 5000)
Rework logging to always log the initramfs output to the kernel
ringbuffer and deprecate PMOS_NO_OUTPUT_REDIRECT in favour of following
the kernel loglevel.

I know it seems silly to use syslogd for this, but it's necessary to
buffer writes to /dev/kmsg per-line if we want to correctly set the log
level, and "tee" does not do this (it will write multiple lines at once,
resulting in "<14>" prints in the ringbuffer). The main advantage to
this is that we won't have kernel logs cut in half by initramfs logs
anymore, everything will be nicely line buffered!

The previous logging solution of multiple "tail" commands would actually
fail to log up to the last few lines before a crash due to how tail
works (it polls the file and buffers lines).

I attempted something like this before, but I stopped after running into
ratelimiting issues. These are now resolved by configuring the
printk_devkmsg sysctl.

Dropping PMOS_NO_OUTPUT_REDIRECT:

The general motivations behind PMOS_NO_OUTPUT_REDIRECT was to avoid
cluttering up the console with initramfs logs when they aren't wanted;
this is now handled instead by the kernels logging facility. We log to
the ringbuffer at LOGLEVEL_INFO, so if "quiet" is specified on the
cmdline (or the loglevel is otherwise set above info) then initramfs
logs will also not be shown.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
2024-06-18 12:35:04 -07:00
Caleb Connolly 6c799ac4f6 postmarketos-initramfs: fork -minimal variant (MR 5000)
We plan to make a lot of changes to the initramfs which will require
incresaing the size. There are some devices that have literally no free
space for this, so make a -minimal initramfs fork that can continue to
support those while we update the regular initramfs.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
2024-06-18 12:34:59 -07:00
Eisenbahnfan e2bf43b9e1 samsung-n2awifi: new device (MR 5233)
[ci:skip-build]: already built successfully in CI
2024-06-17 15:37:54 -07:00
Clayton Craft cc4c164c58 device-purism-librem5: remove craftyguy as maintainer (MR 5223)
I'm not able to give this device the attention it deserves.

This also removes me from maintaining fw and kernel packages used by the
L5, and adds the current L5 maintainers to those packages.

[ci:skip-vercheck]
[ci:skip-build]: already built successfully in CI
2024-06-17 14:20:57 -07:00
Pablo Correa Gómez 8a7042faf6 main/postmarketos-base-ui-gnome: replace evince with papers (MR 5234)
papers is now in community in alpine, and is the GTK4
replacement. Current main version (still not available in alpine),
fits phone screens, but makes sense to change it already now.

Relates #1479

[ci:skip-vercheck] changes are in pmb_recommends
[ci:skip-build]: already built successfully in CI
2024-06-17 17:54:18 +02:00
kubntd d6fa4df277 device-xiaomi-clover: add dependencies for modem, Wi-Fi and GPU (MR 5230)
Depend on msm-firmware-loader, firmware- and soc- packages.
Sort deps alphabetically.

Tidy up deviceinfo:
* add flash_kernel_on_update
* remove unneded things from kernel cmdline
[ci:skip-build]: already built successfully in CI
2024-06-17 09:51:49 +02:00
kubntd d94c7d1721 firmware-xiaomi-clover: add initial firmware package (MR 5230) 2024-06-17 09:51:49 +02:00
Oliver Smith 0b6530a250 gitlab/issue_template: add EOL date to v23.12 2024-06-16 20:40:46 +02:00
Oliver Smith 33107c541d channels.cfg: update for v24.06 release 2024-06-16 19:50:32 +02:00
Andreas Kemnade f3cee8a36e epson-embt2ws: new device (MR 5210)
Currently it requries the check_code result check in the
vendor uboot to be disabled as explained in the wiki.

Booting directly via reconfigured boot order still
does not work. It hangs somewhere in the kernel.

Firmware for Wifi/BT is not included yet.

It could use the linux-postmarketos-omap kernel in the future,
but there are still some dirty things in there e.g. for sound
which are not suitable for a multi-device kernel.
[ci:skip-build]: already built successfully in CI
2024-06-14 15:11:06 +02:00
Alistair Francis 863760c6ba linux-purism-librem5: upgrade to 6.6.32 (MR 5231)
Bump to the 6.6.32 release, including updating the config with the
latest changes from Purism.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
[ci:skip-build]: already built successfully in CI
2024-06-14 07:44:05 +02:00
Anton Bambura 432cc88ff9 google-x64cros: add firmware for ASUS Chromebox 3 NC356U (MR 5229)
Fixes WiFi on this device.

[ci:skip-vercheck]: the changes are only for _pmb_recommends
2024-06-13 15:52:09 +02:00
Danct12 c0ad00a6ae pine64-pinetab2: new device (MR 4208)
PineTab 2 is a successor to the original PineTab from PINE64 released
in mid-2023.

The tablet came with DanctNIX's fork of Arch Linux ARM, comes with
K Desktop Environment as the UI and available with 64GB eMMC/4GB RAM
or 128GB eMMC/8GB RAM.
2024-06-12 16:52:05 +00:00
Danct12 8721705c4b firmware-bestechnic-bes2600: new aport (MR 4208)
Bestechnic BES2600 is a WLAN/BT combo chip.
2024-06-12 16:52:05 +00:00
Alexey Minnekhanov 305b5a7783 linux-postmarketos-qcom-sdm660: upgrade to 6.9.3 (MR 4897)
Changelog since 6.7:

General:

* Adreno 5xx preemtion is now disabled due to hangs it causes.
  This makes GPU a lot more cooperative on these platforms.
* Fixed absence of zap-shader region which caused devices with
  GPU enabled to freeze the whole system.
* Fixed ath10k Wi-Fi not connecting to 5Ghz networks.
* Incorporated in-kernel pd-mapper patchset, therefore userspace
  pd-mapper daemon is not required.
* Kernel cmdline from bootloader is no longer ignored completely,
  in other words, not hardcoded. You can now modify cmdline in
  deviceinfo file and changes in that file will not be ignored.

Devices:

* Xiaomi Redmi Note 7 (lavender):
  * split device trees into 2 variants by panel type (Tianma & BOE)
  * GPU + panel support for 2 variants
  * Vibrator support
  * Connectivity: modem, Wi-Fi and bluetooth support.

* Other/all devices:
  * update device trees according to upstream USB stack changes
    (related to USB 3 phy support)
2024-06-12 15:45:04 +00:00
Alexey Minnekhanov c97eafc5b8 soc-qcom-sdm660: install Adreno GPU quirks script (MR 4897)
Install script into /etc/profile.d with workaround for mesa bugs.
This makes most SDM660 devices usable for general people out of the box.

Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
2024-06-12 15:45:04 +00:00
Barnabás Czémán 22a9cdf7b2 device-xiaomi-lavender: add necessary depedencies for modem, wifi and gpu (MR 4897)
Add msm-firmware-loader, soc-qcom-sdm660-rproc, firmware-xiaomi-lavender
and firmware-qcom-adreno-a530 as dependency. This is necessary to make
Wi-Fi and modem work.
Add support for panel drivers.
2024-06-12 15:45:04 +00:00
Barnabás Czémán 3cd4659a53 firmware-xiaomi-lavender: new aport (MR 4897)
Initial firmware package with firmware for wifi and zap firmware for gpu.
2024-06-12 15:45:04 +00:00
Barnabás Czémán 43133df4ac soc-qcom-sdm660: add rmtfs and qcom-diag to rproc package (MR 4897)
Add rmtfs and qcom-diag and bootmac to rproc package
to make wifi, modem and bluetooth work.
Add swclock-offset as a dependency.
2024-06-12 15:45:04 +00:00
Sicelo A. Mhlongo 5e03ad2817 device-nokia-n900: fix sxmo lock state (MR 5228)
commit 933f2b5703 ("device-nokia-n900: improve sxmo-dwm support [MR 5227]")
accidentally removed sxmo lock state initialization. Restore the lock state
initialization
2024-06-12 16:07:42 +02:00
Stefan Hansson 05925f194a samsung-skomer: remove phoc scale config (MR 5221)
Phoc now defaults to 1,25 as scale on skomer, which while not perfect,
is good enough and lets the device be unlocked. As such, let's remove
this configuration file and encourage improvements upstream instead.

See https://gitlab.com/postmarketOS/pmaports/-/merge_requests/4541
2024-06-12 21:39:41 +09:00
Sicelo A. Mhlongo f888ffee55 device-nokia-n900: fix packaging for upower (MR 5227)
170189393b (device-nokia-n900: add upower support and config (MR 4397) added
an upower config, but did not provide a subpackage to actually install it on
device. Add the needed subpackage.

[ci:skip-build]: already built successfully in CI
2024-06-12 10:30:30 +02:00
Sicelo A. Mhlongo 933f2b5703 device-nokia-n900: improve sxmo-dwm support (MR 5227)
(1) the deviceprofile differs from upstream 1.16.3 in the following respects:

  (a) -export SXMO_NO_KEYBOARD=1 - allow use of the virtual keyboard

  (b) +export SXMO_DMENU_LANDSCAPE_LINES="10"
      +export SXMO_DMENU_PORTRAIT_LINES="6" - these two adjust the size of the
         displayed dmenu menu.

    * NB: All foregoing changes are already merged in sxmo-utils master.

  (c) +export SXMO_TOUCHSCREEN_ID="TSC2005 touchscreen" - allows sxmo to
         reliably toggle touch screen's enabled status

    * The foregoing change is awaiting acceptance by upstream.

(2) The start hook differs from upstream 1.16.3 by the removal of the line that
      starts conky. That program pegs N900 CPU usage at 100% all the time. This
      change is not upstreamable, at least not for the time being
2024-06-12 10:25:59 +02:00
Clayton Craft c2f7be3cec main/postmarketos-base-ui: drop pulseaudio wireplumber config (MR 5225)
This was upstreamed to Alpine aports, see aports@cc2f22db473
2024-06-12 10:40:57 +03:00
Pablo Correa Gómez d375a5d75d main/postmarketos-base-ui: add pipewire-spa-bluez to pipewire-audio (MR 5163)
And configure any modem to be able to use it, so that we can keep
controlling things like bluetooth headsets, and take phone calls from a
car.

[ci:skip-build]: already built successfully in CI
2024-06-11 11:20:10 +02:00
Pablo Correa Gómez be9ac83d73 temp/pulseaudio: drop (MR 5163)
Upstream MR has been closed by Dylan 2 months ago, and this feature is
already present in pipewire. We are doing considerably amount of work to
get Pipewire production-ready in postmarketOS, including features to let
users choose. Given HFP support is actually a nice-to-have feature, but
not a great requirement, our fork is outdated (aports is on 17.0), and that
the upstream MR has been dropped and is not being worked on, it might be
time to drop this.
2024-06-11 11:20:10 +02:00
Clayton Craft 263d00790e firmware-brcm43752: install symlinks to fix driver loading (MR 5224)
At some point the driver started using symlinks w/ machine IDs for
finding/loading fw, and for some reason I thought it was a good idea to
not install those symlinks.

Fixes this failure when loading the brcmfmac driver:
brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43752-sdio.purism,librem5r4.bin failed with error -2

[ci:skip-build]: already built successfully in CI
2024-06-10 21:27:51 +02:00
Mighty 65679fec40 linux-postmarketos-omap: upgrade to 6.9.3 (MR 5216)
* Use upstreamed power controller for espresso
  Related issue: https://gitlab.com/postmarketOS/pmaports/-/issues/2825

* Include patch for iio-rescale logic
  Related: https://lore.kernel.org/all/20220524075448.140238-1-linus.walleij@linaro.org/

* Enable CONFIG_NLS_ASCII
  Related: https://gitlab.com/postmarketOS/pmaports/-/issues/2874

* espresso-common: Remove twl6030 import and use upstreamed clk32kg for wlan

[ci:skip-build]: already built successfully in CI
Tweaked-By: Oliver Smith <ollieparanoid@postmarketos.org>
2024-06-10 19:56:01 +02:00
Oliver Smith 074eb3b0a5 temp/gnome-shell-mobile: upgrade to 45_git20240610 (MR 5220)
Add the patch "keyboard: Add a double click gesture on the bottom bar
to trigger the OSK".

[ci:skip-build]: already built successfully in CI
2024-06-10 08:14:15 +02:00
Alexandre Marquet ef8e2d0e02 device-samsung-manta: load ds2482 module at boot (MR 5205)
With the current kernel, ds2482 w1<>i2c module is not automatically
loaded at boot, which prevents loading the ds2784 battery module.

Signed-off-by: Alexandre Marquet <tb@a-marquet.fr>
[ci:skip-build]: already built successfully in CI
2024-06-09 16:20:07 +02:00
Caleb Connolly 647f2bc640 linux-postmarketos-qcom-sdm845: upgrade to 6.9.0-r2 (MR 5212)
This fixes op6 display panel support, drm error spam in dmesg, and
various other minor things.

It also enabled dynamic debugging and ftrace.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
2024-06-08 18:57:39 +02:00
Anton Bambura 492f3c0e64 CI: test installing of postmarketos-installkernel (MR 4681)
[ci:skip-build]: too many kernels to build in CI, all built locally
2024-06-07 11:11:58 +02:00
Pablo Correa Gómez b541410f51 linux-postmarketos-qcom-sm8250: depend on postmarketos-installkernel (MR 4681) 2024-06-06 23:30:19 +02:00
Pablo Correa Gómez 1335a73415 linux-postmarketos-qcom-sm7125: depend on postmarketos-installkernel (MR 4681) 2024-06-06 23:30:19 +02:00
Pablo Correa Gómez ab75cf71f7 linux-postmarketos-qcom-apq8064: depend on postmarketos-installkernel (MR 4681) 2024-06-06 23:30:19 +02:00
Pablo Correa Gómez bf2f268fac linux-postmarketos-exynos7870: depend on postmarketos-installkernel (MR 4681) 2024-06-06 23:30:19 +02:00
Pablo Correa Gómez 5a6a85f9a1 linux-google-smaug: depend on postmarketos-installkernel (MR 4681) 2024-06-06 23:30:19 +02:00
Pablo Correa Gómez c85d6e2820 linux-google-nyan: depend on postmarketos-installkernel (MR 4681) 2024-06-06 23:30:19 +02:00
Pablo Correa Gómez 9dd4479136 linux-postmarketos-qcom-sc7180: depend on postmarketos-installkernel (MR 4681) 2024-06-06 23:30:19 +02:00
Pablo Correa Gómez ddfa8a9124 linux-postmarketos-mediatek-mt8173: depend on postmarketos-installkernel (MR 4681) 2024-06-06 23:30:18 +02:00
Anton Bambura c03571ace8 linux-postmarketos-qcom-sm7150: depend on postmarketos-installkernel (MR 4681) 2024-06-06 23:30:18 +02:00
Raymond Hackley 449f5aef15 qcom-msm8916: add panel-acer-a1-724-hx8394d to modules-initfs (MR 5209)
[ci:skip-build]: already built successfully in CI
2024-06-06 17:31:48 +02:00
Pablo Correa Gómez 77373bff11 CODEOWNERS: Add Pablo and Newbyte to GNOME stuff (MR 5208)
[ci:skip-build]: already built successfully in CI
2024-06-06 12:46:19 +02:00
Pablo Correa Gómez 19d7c9cd83 CODEOWNERS: add Caleb and Clayton as maintainers of the initramfs (MR 5208) 2024-06-06 12:46:19 +02:00
Clayton Craft d46d5855be main/postmarketos-ui-phosh: drop hardcoded dependency on pulseaudio (MR 5203)
This allows users to test out pipewire audio on phosh. Currently the
default audio backend is pulseaudio. This is configured in pmos-base-ui.

fixes #2013
[ci:skip-build]: already built successfully in CI
2024-06-06 12:42:03 +02:00
SSD 086078ded7 main/postmarketos-initramfs: fix stowaway (MR 5206)
I have noticed a bug. Because is some cases, uuid for the boot partition is set, it won't reach logic for the stowaway.

[ci:skip-build]: already built successfully in CI
2024-06-06 11:12:48 +02:00
Andreas Kemnade e0382da4f7 kobo-clara2e: new device (MR 5202)
For now, limited support without graphics. Graphics
support would need messing and detecting board variants.

especially since Rev B seems to need a vcom setting per batch.

[ci:skip-build]: already built successfully in CI
2024-06-05 23:03:05 +02:00
Willow Barraco c5ca6732a0 main/postmarketos-base-ui-cage: add CAGE_UI_ARGS (MR 5168)
Usefull to pass arguments to the cage exec program.

[ci:skip-build]: already built successfully in CI
2024-06-05 22:43:45 +02:00
knuxify 98603be1a2 device-samsung-lt01: use firmware-samsung-lt01 package for firmware (MR 5185)
Replace the firmware-samsung-midas package with an lt01-specific one.

[ci:skip-build]: already built successfully in CI
2024-06-04 23:38:40 -07:00
knuxify 5dee283860 firmware-samsung-lt01: new package (MR 5185)
Add separate firmware package for samsung-lt01.
2024-06-04 23:38:40 -07:00
knuxify 2e654e1cbb firmware-samsung-midas: drop lt01 firmware (MR 5185)
The lt01 firmware will be moved to a separate package.
2024-06-04 23:38:40 -07:00
Andreas Kemnade f39958cc88 linux-postmarketos-imx-ereader: Update to 6.9.0 (MR 5201)
[ci:skip-build]: already built successfully in CI
2024-06-04 23:34:51 -07:00
Richard Acayan 1811ad154c google-sargo: enable DRM rendering in initramfs (MR 5199)
[ci:skip-build]: already built successfully in CI
2024-06-04 23:28:21 -07:00
mae 61133a23ae main/msm-fb-refresher: move cleanup from initramfs into msm-fb-refresher (MR 5191)
[ci:skip-build]: already built successfully in CI
2024-06-04 20:46:50 +02:00
mae 25ad7892a1 main/postmarketos-mkinitfs-hook-debug-shell: Cleanup debug-shell telnet server (MR 5191)
Moved the cleanup code from initramfs
2024-06-04 20:46:50 +02:00
mae ebd351c346 main/postmarketos-initramfs: Allow packages to define cleanup hooks (MR 5191) 2024-06-04 18:44:34 +00:00
Clayton Craft 45dec6cc73 pmos-base-ui: re-enable DNS filtering (MR 4846)
Alpine aports will have a patch[1] to fix the bug this was working around,
so let's re-enable it.

This reverts commit 4dac896160.

1. https://gitlab.alpinelinux.org/alpine/aports/-/merge_requests/61103

fixes #2601

Also see #1430
2024-06-04 09:42:33 -07:00
Alexey Minnekhanov c9bab638d4 main/lk2nd: upgrade to 0.16.0 (MR 5197)
Latest release of "old" lk2nd.

Release notes:
- msm8974 improvements
- New variants for few Samsung devices, some renames
- Added Lenovo Vibe K5 variants

New devices:
- Vivo Y21L
- Motorola Moto G 4G
- Huawei G7 Plus
- Samsung Galaxy On7 2015 (SM-G600FY)
- HTC One M8
- Samsung G360T

Added big patch to fix compile errors with gcc-14.

Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
[ci:skip-build]: already built successfully in CI
2024-06-03 22:56:04 -07:00
Johannes Marbach 96148a6213 main/unl0kr: upgrade to 3.2.0 (MR 5198)
[ci:skip-build]: already built successfully in CI
2024-06-04 07:46:34 +02:00
Oliver Smith f775c45906 gitlab/issue_template: add v24.06 2024-06-03 07:57:50 +02:00
Oliver Smith 33dd515af3 main/postmarketos-ui-sxmo-*: add wallpaper (MR 5195)
Add postmarketos-artwork-wallpapers to _pmb_recommends, so Sxmo shows
the postmarketOS wallpaper.

Related: https://todo.sr.ht/~mil/sxmo-tickets/602
Related: pmaports issue 2499
[ci:skip-build]: already built successfully in CI
2024-06-02 21:58:01 +02:00
Willow Barraco 83284e5749 main/postmarketos-ui-sxmo-de-*: use downgraded conky (MR 5195) 2024-06-02 21:47:36 +02:00
Willow Barraco 8e5597aed2 temp/conky: downgrade to 1.20.1 (MR 5195)
Conky got an issue on Wayland since 1.20.2:

https://github.com/brndnmtthws/conky/issues/1898
2024-06-02 21:47:36 +02:00
Oliver Smith 0059607677 main/postmarketos-artwork: set plasma wallpaper (MR 5186)
Set the postmarketOS wallpaper as default for Plasma Mobile and Plasma
Desktop, so we can change it across all UIs with every postmarketOS
release.

It would be nice if we could just set the wallpaper with a simple config
file (reported https://bugs.kde.org/show_bug.cgi?id=487816). Until that
is possible, use a shell script as workaround.

Copy the contents dir and metadata.json file explicitly, instead of
copying the entire "meadow" directory. With this change we avoid copying
meadow.svg, which fixes two issues:
* This file doesn't have a stable name, when we switch to the next
  wallpaper and the user had selected it, the wallpaper will just be
  gone instead of automatically switching to the new wallpaper.
* It shows up as broken wallpaper in Plasma's wallpaper selection.

[ci:skip-build]: already built successfully in CI
2024-06-02 19:37:43 +02:00
Oliver Smith 06f761e972 main/postmarketos-release-upgrade: upgrade to 1.7.0 (MR 5193)
[ci:skip-build]: already built successfully in CI
2024-06-02 17:01:25 +02:00
Oliver Smith fab386bcc7 cross/busybox-static-*: upgrade to 1.36.1-r29 2024-06-02 16:43:10 +02:00
Oliver Smith d2cf8cd78a u-boot-librem5: fix build with python 3.12 (MR 5192)
[ci:skip-build]: already built successfully in CI
2024-06-02 15:20:26 +02:00
David Wronek 4fad2a99d4 treewide: update my email address (MR 5177)
[ci:skip-vercheck]

Signed-off-by: David Wronek <david@mainlining.org>
2024-06-02 17:10:07 +09:00
David Wronek e65dc71f05 xiaomi-miatoll: new device (MR 5177)
Add support for the Xiaomi Miatoll phones. There are currently two
device trees in the upstream kernel.

Signed-off-by: David Wronek <david@mainlining.org>
2024-06-02 17:10:07 +09:00
David Wronek 9c22892b09 linux-postmarketos-qcom-sm7125: upgrade to 6.9.2 (MR 5177)
Upgrade linux-postmarketos-qcom-sm7125 to v6.9.2 and take
maintainership.

Signed-off-by: David Wronek <david@mainlining.org>
2024-06-02 17:10:07 +09:00
David Wronek dd9a80f708 samsung-a52q: remove (MR 5177)
The original maintainer unfortunately has bricked their phone. Drop the
device package in preparation for the SM7125 kernel upgrade.

Signed-off-by: David Wronek <david@mainlining.org>
2024-06-02 17:10:07 +09:00
David Wronek 6716574b85 samsung-a72q: remove (MR 5177)
The device trees for this phone have never been upstreamed
unfortunately. Drop the device package in preparation for the SM7125
kernel upgrade.

Signed-off-by: David Wronek <david@mainlining.org>
2024-06-02 17:10:07 +09:00
David Wronek b8c90fef97 alsa-ucm-conf-samsung-sm7125: remove (MR 5177)
Drop alsa-ucm-conf-samsung-sm7125 in preparation for the SM7125 kernel
upgrade.

Signed-off-by: David Wronek <david@mainlining.org>
2024-06-02 17:10:07 +09:00
Clayton Craft 158247240f device-lenovo-21bx: add usb module to initramfs (MR 5189)
These modules are required in the initramfs when booting a kernel that
builds them as modules (i.e. not builtin)

[ci:skip-build] already built successfully in CI
2024-06-01 16:34:52 -07:00
Richard Acayan 43715175e8 linux-postmarketos-qcom-sdm670: upgrade to v6.9.3 (MR 5187) 2024-06-01 22:23:47 +09:00
Clayton Craft 393250f826 main/postmarketos-mkinitfs: upgrade to 2.5.0 (MR 5183)
- Add support for systems with merged /usr (MR 39)
 - Improve support for deviceinfo format (MR 52)
 - Add support for systemd (MR 51)
 - Document archive compression formats/levels (MR 50)

[ci:skip-build] already built successfully in CI
2024-05-31 12:05:07 -07:00
Caleb Connolly eff1586b5c linux-postmarketos-qcom-sdm845: depend on python3 (MR 5188)
Since 6.10-rc1 python3 is now a hard requirement to compile the kernel,
it's used to generates headers for drm/msm. Add it now so our CI can
keep working.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
2024-05-31 13:50:33 +02:00
Clayton Craft 53407e5203 main/postmarketos-base-ui-gnome: systemd-related service fixes (MR 5184)
- Fix MM and NM service unit names
- drop iio-sensor-proxy, seems to be dbus activated

[ci:skip-build]: already built successfully in CI
2024-05-29 17:23:56 -07:00
Clayton Craft 0a4c05863e main/postmarketos-ui-plasma-mobile: autostart modemmanager (MR 5184) 2024-05-29 17:23:56 -07:00
Clayton Craft e979d5e79e main/postmarketos-base-ui-plasma: various systemd service fixes (MR 5184)
- fix NM unit name
- relocate an errant -openrc pkg
- remove iio-sensor-proxy from service autostart on systemd, it appears
  that this is dbus activated (inspected the .service file, no `Install`
  section and using dbus directive)
2024-05-29 17:23:44 -07:00
Oliver Smith 3126954b45 cross/grub-efi-x86: upgrade to 2.12-r5 2024-05-29 00:26:57 +02:00
Oliver Smith 2d1d38e73f cross/musl-*: upgrade to 1.2.5-r1 2024-05-29 00:26:57 +02:00
Oliver Smith b4f51af7c8 cross/busybox-static-*: upgrade to 1.36.1-r28 2024-05-29 00:26:57 +02:00
Clayton Craft 59b83d7847 main/postmarketos-ui-*: remove hardcoded dependency on pulseaudio (MR 5145)
This allows the audio switching backend stuff to work on all UIs (see
!5072 / 87d355e08). For example, users of any UI can switch audio
backends by installing one of the pmos-base-ui-audio-* metapackages.

[ci:skip-build] already built successfully in CI
2024-05-28 13:15:59 -07:00
Clayton Craft 96e61da7a2 main/postmarketos-base-ui: audio backend improvements (MR 5145)
- Merge pulseaudio and audio-pulse subpkgs
  Just general cleanup, there's no reason to have a separate pulseaudio
  subpackage now since both were being installed anyways (one indirectly
  depended on the other)

- Add 'none' option for audio backend
  Some users might not want to have an audio backend installed taking
  up disk space. For example they're running a headless server or just
  don't want audio I/O, and PA + dependencies, which include mesa(!!)
  can be a lot... I measured 208MB

Note about drop the pulseaudio subpkg and it's "provides="...
This was done in 6e325417, when pmos-base-ui was split off from
pmos-base (3 years ago). I'm not sure how many people are still rocking
a 3yo pmOS install, but the original package (see 92e43e83) was only
pulled in by install_if, so I think the chance that it's in someone's
world file would be really really low.
2024-05-28 13:15:55 -07:00
Clayton Craft d20a7944bf main/postmarketos-base-ui-gnome: add weather app to pmb_recommends (MR 5149)
[ci:skip-build] already built successfully in CI
[ci:skip-vercheck]
2024-05-28 12:07:42 -07:00
Clayton Craft 564429192e main/postmarketos-ui-gnome: add snapshot to recommends (MR 5149)
Snapshot is a useful camera app, currently only useful on webcams and
that's why I added it here and not in the base-ui-gnome package
2024-05-28 11:17:20 -07:00
Clayton Craft 1f32b78940 main/postmarketos-base-ui-plasma: enable NM for systemd post-install (MR 5171)
[ci:skip-vercheck]

[ci:skip-build]: already built successfully in CI
2024-05-28 09:33:54 -07:00
Oliver Smith 333f5f77ce main/postmarketos-ui-sxmo-*: set pmb:systemd-never (MR 5171)
Sxmo maintainers have decided to stay with OpenRC on postmarketOS. Set
this option, so pmbootstrap doesn't even ask the user if they want to
install Sxmo with systemd. The idea is that users don't end up
reporting issues about this unsupported use case.
2024-05-28 09:33:52 -07:00
Bart RibbersandClayton Craft d0b1579cc7 main/postmarketos-ui-plasma-*: support openrc and systemd installs (MR 5171)
Co-authored-by: Clayton Craft <clayton@craftyguy.net>
2024-05-28 09:33:29 -07:00
Sam DayandClayton Craft 7f16b13781 main/postmarketos-ui-phosh: support openrc and systemd installs (MR 5171)
Also see: MR 4904

Co-authored-by: Clayton Craft <clayton@craftyguy.net>
2024-05-28 09:33:29 -07:00
Caleb ConnollyandClayton Craft b18ccab0f5 main/postmarketos-base-ui-gnome: split openrc depends to -openrc subpackage (MR 5171)
Allow this package to be used on systemd installs without pulling in a
bunch of openrc services.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Co-authored-by: Clayton Craft <clayton@craftyguy.net>
2024-05-28 09:33:29 -07:00
Caleb Connolly d35091be52 main/postmarketos-base-ui: initial support for systemd (MR 5171)
Not sure if dropping the networkmanager-openrc dependency causes issues.
Otherwise, make the elogind subpackage conflict with systemd-logind.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
2024-05-27 13:54:35 -07:00
Stefan Hansson 924c47e1d6 linux-postmarketos-qcom-sm8250: disable CONFIG_RT_GROUP_SCHED (MR 5178)
The community check now mandates that this is turned off.

Closes https://gitlab.com/postmarketOS/pmaports/-/issues/2848
[ci:skip-build]: already built successfully in CI
2024-05-27 22:50:45 +02:00
Stefan Hansson fcf8026c83 CI: use latest (stable) Alpine instead of Edge (MR 5174)
Alpine 3.20 has released now which should contain everything we need to
run our CI.

Closes https://gitlab.com/postmarketOS/pmaports/-/issues/2747
[ci:skip-build]: already built successfully in CI
2024-05-27 13:33:23 -07:00
Clayton Craft d163a56a66 community/lenovo-21bx: move to community (MR 5156)
[ci:skip-vercheck]
[ci:skip-build] already built successfully in CI
2024-05-27 13:30:13 -07:00
Clayton Craft cb34a47985 device-lenovo-21bx: Add Jane as co-maintainer (MR 5156) 2024-05-27 13:30:12 -07:00
Clayton Craft 015a3299fa device/lenovo-21bx: remove Konrad as maintainer (MR 5156)
He did an awesome job adding an initial port for this device but hasn't
helped to maintain it, so I'm removing him from the list of active maintainers.
2024-05-27 13:29:43 -07:00
Clayton Craft fd16f66e4f main/postmarketos-config-nftables: add openrc subpkg (MR 5172)
For installing openrc-specific dependencies, specifically
nftables-openrc which is needed because the post-install enables the
openrc service and expects the initd script to be available then

[ci:skip-build] already built successfully in CI
2024-05-27 13:27:16 -07:00
Pablo Correa Gómez aaa7d267a2 temp/gnome-shell-mobile: rename extensions app to add "mobile" (MR 5176)
And add it to pmb_recommends. This way new installations with
pmb_recommends will force install the correct version.

[ci:skip-build]: already built successfully in CI
2024-05-27 13:23:45 -07:00
Pablo Correa Gómez 5e865cde7e temp/gnome-shell-mobile: sync with upstream APKBUILD (MR 5176)
Most remarkably, in addition to cleaning up a bit, add the
gnome-extensions-app subpackage.

Fixes #2844
2024-05-27 13:23:45 -07:00
Adam Thiede 006256a0d0 linux-postmarketos-mediatek-mt8173: upgrade to 6.9.2 (MR 5179)
[ci:skip-build]: already built successfully in CI
2024-05-27 08:50:10 +02:00
Sergey Lisov dc948f885a samsung-a6lte: add workaround for Wi-Fi not connecting (MR 5175)
Shamelessly stolen from https://wiki.postmarketos.org/wiki/Samsung_Galaxy_J7_Pro_(samsung-j7y17lte)#Notes_on_WiFi
2024-05-26 10:23:12 +09:00
Dylan Van Assche 6cfa3caffe temp/iio-sensor-proxy: rebuild against libssc 0.1.5 (MR 5173)
See https://gitlab.alpinelinux.org/alpine/aports/-/merge_requests/66530
2024-05-26 10:09:36 +09:00
Luca Weiss 568cac3585 firmware-fairphone-fp5: upgrade to 20240417 (MR 5169)
[ci:skip-build]: already built successfully in CI
2024-05-25 08:38:38 +02:00
Luca Weiss fe27e85609 firmware-fairphone-fp4: upgrade to 20240313 (MR 5170)
And remove the compatibility symlinks again, all kernels running now
should use the .mbn files already.

[ci:skip-build]: already built successfully in CI
2024-05-24 15:46:27 +02:00
Luca Weiss cf513281f9 linux-postmarketos-qcom-msm8974: upgrade to 6.9.1 (MR 5159)
Manual config changes:
* QCOM_APCS_IPC=y
* RT_GROUP_SCHED=n (community check)

[ci:skip-build]: already built successfully in CI
2024-05-23 09:25:03 +02:00
Luca Weiss 4d18a89f6f linux-postmarketos-qcom-msm8226: upgrade to 6.9.1 (MR 5166)
Manual config changes:
* BMC150_ACCEL=m

[ci:skip-build]: already built successfully in CI
2024-05-23 08:46:15 +02:00
Andreas Kemnade 8ca07c2439 CODEOWNERS: add myself for packages I maintain (MR 5165)
[ci:skip-build]: already built successfully in CI
2024-05-22 16:26:33 -07:00
Barnabás Czémán c30b0adb4d linux-postmarketos-qcom-msm8953: update to 6.9.1-r1 (MR 5167)
Update kernel to the latest release.

[ci:skip-build]: already built successfully in CI
2024-05-22 16:16:30 +02:00
Robert Mader f77dc643c9 temp/libcamera: fork for temporary downstream patches (MR 5162)
which are probably too experimental to ask Alpine to carry them, while being
very helpful for devices that pmOS targets. The explicit goal is to help
Libcamera development and drop the fork again.

For the dma heaps permissions see the ongoing debate in
https://lore.kernel.org/all/bb372250-e8b8-4458-bc99-dd8365b06991@redhat.com/
It's possible that Libcamera will switch to another solution in a future
release or that memory accounting issues around dma heaps will need to
get fixed in the kernel before the permissions can be set by default by
distros.

Regarding `libcamera: simple:` patches:
 - 0001-0003 can likely be dropped once the Libcamera SoftISP gains
   support for raw (bayer) streams passthrough (on top of converting to
   RGB or YUV formats).
 - 0004 will likely be needed until Megi downstream patches for the
   Pinephone get improved/upstreamed and Libcamera adopted accordingly.

With these patches libcamera and pipewire based applications should work
on the Librem5, Pinephone and - hopefully soon - devices like the OP6.

See https://gitlab.com/postmarketOS/pmaports/-/merge_requests/5162 for
more context.
[ci:skip-build]: already built successfully in CI
2024-05-21 20:23:50 +02:00
Pablo Correa Gómez 982799b9a8 device-nokia-n900: add postmarketos-mvcfg to depends (MR 5085)
Since it's been removed from postmarketos-base. In the process, also
reorder the dependencies

[ci:skip-build]: already built successfully in CI
2024-05-21 10:16:27 +02:00
Pablo Correa Gómez f39d5a6291 main/postmarketos-base-ui: drop mvcfg (MR 5085)
All these config update are there since 2021. Having them there
serves no purpose, apart from increasing packaging complexity and
have some unnecessary files under /etc
2024-05-21 10:16:27 +02:00
Pablo Correa Gómez 064d503623 main/postmarketos-base: drop mvcfg (MR 5085)
All these config update are there since 2020. Having them there
serves no purpose, apart from increasing packaging complexity and
have some unnecessary files under /etc
2024-05-21 10:16:27 +02:00
Pablo Correa Gómez a65e271055 main/postmarketos-ui-gnome: add gnome-extensons-app to pmb_recommends (MR 5152)
[ci:skip-vercheck] pmb_recommends do not need bumping pkgrel

[ci:skip-build]: already built successfully in CI
2024-05-21 09:53:51 +02:00
Pablo Correa Gómez 15a730118f main/postmarketos-ui-gnome-mobile: add gnome-extensions-app to pmb_recommends (MR 5152) 2024-05-21 09:53:51 +02:00
Devellevel ad2ac94979 device-sony-suzuran: Fix LightDM and add msm-fb-refresher (MR 5134) 2024-05-21 06:44:41 +02:00
Oliver Smith 2b98781eb1 CODEOWNERS: update clamor-s nickname (MR 5155)
> User 'clamor95' was moved to 'clamor-s'. Please update any links and
> bookmarks that may still have the old path.

[ci:skip-build]: already built successfully in CI
2024-05-20 15:49:14 -07:00
Oliver Smith a36baab269 CODEOWNERS: update postmarketos-ui-plasma-mobile (MR 5155)
This is maintained by Bart, see Maintainer line in the APKBUILD.
2024-05-20 15:49:14 -07:00
Barnabás Czémán dfee3e4365 msm8953: remove gpu firmwares from initfs (MR 5114)
Remove gpu firmwares from initfs,
panel drivers work fine without them.

[ci:skip-build]: already built successfully in CI
2024-05-20 15:43:50 -07:00
Clayton Craft da0f0a306a device-qemu-aarch64: enable support for efi boot (MR 5137)
Copied from qemu-amd64. Enabling support for EFI boot allows me/others
to easily test pmOS EFI boot loader and config changes. Legacy BIOS boot
will still work, see 22c602096 for details.

[ci:skip-build]: already built successfully in CI
2024-05-19 22:24:28 +02:00
Andreas Kemnade 7763bc8113 linux-postmarketos-imx-ereader: rename from linux-kobo-clara-mainline (MR 5153)
Rename package to indicate the group of devices it is used for.

[ci:skip-build]: already built successfully in CI
2024-05-19 17:29:47 +02:00
Barnabás Czémán 6b55f838d6 xiaomi-rosy: new device (MR 5128)
[ci:skip-build]: already built successfully in CI
2024-05-19 14:34:40 +02:00
Barnabás Czémán c5b6c5397a linux-postmarketos-qcom-msm8953: upgrade to 6.9.1-r0 (MR 5132)
[ci:skip-build]: already built successfully in CI
2024-05-19 13:32:56 +02:00
Barnabás Czémán d7f8b31920 device-motorola-ali: remove non-free-firmware & add lk2nd and panels (MR 5132)
Add lk2nd-msm8953-motorola-ali as a dependency and panel drivers to initfs and
remove non-free-firmware subpackage.
2024-05-19 13:32:54 +02:00
Barnabás Czémán 26b052562a firmware-motorola-ali: clean up firmwares (MR 5132)
Remove every firmware what can be loaded with msm-firmware-loader.
2024-05-19 13:32:54 +02:00
Barnabás Czémán 886baeb741 main/lk2nd-msm8953: update to 0.3.9 & add motorola-ali (MR 5132)
Update lk2nd to latest release and add motorola-ali project
as an subpackage.
2024-05-19 13:32:54 +02:00
Barnabás Czémán feaa0e9471 soc-qcom-msm8953: update UCM configs (MR 5132)
Update alsa ucm configs to the latest commit.
2024-05-19 13:32:54 +02:00
knuxify a7827ef4e2 main/postmarketos-ui-weston: drop weston-clients from depends (MR 5143)
These appear to be client demos, and are already in _pmb_recommends;
drop them from depends to avoid duplication.

[ci:skip-build]: already built successfully in CI
2024-05-19 13:28:59 +02:00
knuxify 3d91c3dd97 main/postmarketos-base-ui-gnome: move xdg-user-dir and xdg-user-dir-gtk to depends (MR 5143)
Previously xdg-user-dir was repeated in both _pmb_recommends and depends;
move it to the depends variable, alongside with xdg-user-dir-gtk.
2024-05-19 13:28:58 +02:00
knuxify a1c73a055c CODEOWNERS: add entry for samsung-lt01 (MR 5154)
[ci:skip-build]: already built successfully in CI
2024-05-19 11:32:33 +02:00
Stefan Hansson 66397e7563 linux-purism-librem5: upgrade to 6.6.29pureos1 (MR 5141)
[ci:skip-build]: already built successfully in CI
2024-05-19 11:04:09 +02:00
Arnav Singh f4f6c02ed1 linux-postmarketos-allwinner: upgrade to 6.9.0_git20240514 (MR 5130)
- 0003-dts-pinetab-add-missing-bma223-ohci1.patch

  The original patch added a node for BMA223 and a node for ohci1.
  The former is already present in upstream, so the new patch
  0003-dts-pinetab-add-missing-ohci1.patch only adds the latter.

- 0004-arm64-dts-allwinner-Add-bluetooth-node-to-the-PineTa.patch

  The patch is now present in upstream so it has been removed.
  However it's worth noting that upstream's node has the wake GPIOs
  reversed from the original patch. The original patch added:

      device-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
      host-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */

  ... while upstream has:

      device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
      host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */

  This has not been tested on a PineTab.

- 0005-dts-pinetab-make-audio-routing-consistent-with-pinep.patch

  The first hunk of the patch is in upstream and has been removed.

- 0013-Revert-usb-quirks-Add-USB_QUIRK_RESET-for-Quectel-EG25G-Modem.patch

  This patch reverted upstream commit that was present until v6.7
  ( https://codeberg.org/megi/linux/commit/f9e3e7ea4ea5452e2c149acbe2a958751046ca29 )
  but is not present in v6.8+, so the patch has been removed.

- 0014-usb-serial-option-add-reset-resume-callback-for-WWAN.patch

  The patch is now present in upstream so it has been removed.

- 0016-Define-orientation-and-rotation-for-PinePhone-camera.patch

  The patch is now present in upstream so it has been removed.

---

The issues found with the previous upgrade to 6.8.4
( 646e0b50df ), ie reliably receiving calls
in suspend ( #2734 ) and the headset / headphones detection being broken
because of the jack detection changes ( #2738 ) have been fixed.

[ci:skip-build]: already built successfully in CI
2024-05-18 10:21:12 -07:00
Dylan Van Assche 2c6d302a13 firmware-shift-sdm845: use new hexagonrpcd paths and drop board-2.bin (MR 5151)
Adjust the sensor firmware paths for hexagonrpcd 0.3.1.
Also drop board-2.bin file which is now upstream and use upstream mba.mbn
and wlanmdsp.mbn.

[ci:skip-build]: already built successfully in CI
2024-05-18 14:10:23 +02:00
Joel Selvaraj c461e9ed35 device-shift-axolotl: ship hexagonrpcd conf (MR 5151)
Which specify path to new sensor firmware location needed by hexagonrpcd.
2024-05-18 14:10:23 +02:00
Sergey Lisov 754375c006 linux-samsung-a6lte: disable CONFIG_ZSWAP (MR 5144)
This causes a lot of spam in dmesg about "failed to allocate compressor transform", making it nearly impossible to search anything in the system logs.

This option has nothing to do with zram.
[ci:skip-build]: already built successfully in CI
2024-05-18 09:59:59 +02:00
Clayton Craft e95ba25742 main/postmarketos-ui-kodi: disable for x86 (MR 5146)
kodi x86 support was dropped upstream, see aports f53343613a4

[ci:skip-build]: already built successfully in CI
[ci:skip-vercheck]: Only changing architectures, no changes to package.
2024-05-18 09:47:08 +02:00
Joel Selvaraj deed403153 linux-postmarketos-qcom-sdm845: upgrade to 6.9.0 (MR 5099)
Contains fix for Poco F1 display issue when booting and enables sensor
support for Poco F1.

[ci:ignore-count]
[ci:skip-build]: already built successfully in CI
2024-05-18 09:41:41 +02:00
Joel Selvaraj 874dadcf04 temp/iio-sensor-proxy: workaround the hexagonrpcd delay (MR 5099)
Needed for some devices like the OP6T and AYN Odin
2024-05-18 09:41:41 +02:00
Joel Selvaraj acc3c898e6 device-ayn-odin: ship hexagonrpcd conf (MR 5099)
Which specify path to new sensor firmware location needed by hexagonrpcd.
2024-05-18 09:41:41 +02:00
Joel Selvaraj 9026187fe1 device-oneplus-fajita: ship hexagonrpcd conf (MR 5099)
Which specify path to new sensor firmware location needed by hexagonrpcd.
2024-05-18 09:41:41 +02:00
Joel Selvaraj 1761c761b2 device-oneplus-enchilada: ship hexagonrpcd conf (MR 5099)
Which specify path to new sensor firmware location needed by hexagonrpcd.
2024-05-18 09:41:41 +02:00
Robert Eckelmann 1eb794e124 device-xiaomi-beryllium: add sensor support (MR 5099) 2024-05-18 09:41:41 +02:00
Joel Selvaraj f547af68d8 firmware-ayn-odin: use new hexagonrpcd paths (MR 5099) 2024-05-18 09:41:40 +02:00
Dylan Van Assche 694fefda45 firmware-oneplus-sdm845: use new hexagonrpcd paths and drop board-2.bin (MR 5099)
Adjust sensor firmware paths for hexagonrpcd 0.3.1.
Also drop board-2.bin file which is now upstream.
2024-05-18 09:41:40 +02:00
Dylan Van Assche dbf2e96893 firmware-xiaomi-beryllium: add sensor firmware and drop board-2.bin (MR 5099) 2024-05-18 09:41:40 +02:00
Clayton Craft ad560f56fa linux-lenovo-21bx: kconfig updates (MR 5135)
- Enable KVM support (for using with slbounce!)
- Disable RT_GROUP_SCHED, community device kernel requirement

[ci:skip-build]: already built successfully in CI
2024-05-17 16:40:22 +02:00
Luca Weiss a25512a35a linux-postmarketos-qcom-sc7280: upgrade to 6.9.0 (MR 5138)
Kconfig changes:
* Disable RT_GROUP_SCHED ('community' check)

[ci:skip-build]: already built successfully in CI
2024-05-17 16:37:20 +02:00
Luca Weiss 26d72af07f linux-postmarketos-qcom-sm6350: upgrade to 6.9.0 (MR 5139)
[ci:skip-build]: already built successfully in CI
2024-05-17 16:33:34 +02:00
Raymond Hackley 3f48a12d2e samsung-j5(x): maintain devices (MR 5140)
[ci:skip-build]: already built successfully in CI
2024-05-17 16:30:12 +02:00
neokitty 7a4e852165 firmware-xiaomi-fire: new aport (MR 5129)
[ci:skip-build]: already built successfully in CI
2024-05-17 13:18:21 +02:00
Clayton Craft 0c1113b3ec linux-*: enable NLS_ASCII for kernels that support EFI boot (MR 5136)
These kernels must have NLS_ASCII set after bb6d7a05b, or else they
cannot mount the ESP as /boot and boot fails. This kconfig option will
be added to the pmb efi kconfig check so that this is caught in the
future pre-merge.

fixes 3909b1dbf and bb6d7a05b

[ci:skip-build] already built successfully in CI
2024-05-16 22:48:41 -07:00
Pablo Correa Gómez 3909b1dbf6 main/postmarketos-base: fixup old /etc/fstab entries with multiple bugs (MR 5089)
See pmbootstrap!2304
2024-05-16 12:02:37 +02:00
Pablo Correa Gómez 28e58a9cda main/postmarketos-initramfs: update comment on why we mount /boot (MR 5089) 2024-05-16 12:02:37 +02:00
Pablo Correa Gómez bb6d7a05b3 main/postmarketos-initramfs: add options for charset to mount vfat /boot (MR 5089)
This charset is the default and the recommended value, since boot fat
partitions should be case insensitive. linux-lts and linux-edge in
alpine use "utf-8", that might change, but add the options regardless,
so we can be safe

Fixes https://gitlab.com/postmarketOS/pmaports/-/issues/2782
2024-05-16 12:02:37 +02:00
Pablo Correa Gómez efc7ad99e4 main/postmarketos-initramfs: add some sane mount options to /boot (MR 5089)
We won't want executables, suid executables, devices. We neither want
symbolic links in fat partitions. These have been taken from
systemd (Ref #2782)
2024-05-16 12:02:37 +02:00
Vitaliy Ognev 2db5ff27fc main/postmarketos-base-ui-cage: automatically rotate panel (MR 5121)
[ci:skip-build]: already built successfully in CI
2024-05-16 10:40:19 +02:00
Clayton Craft e0ff1e478c linux-lenovo-21bx: upgrade to 6.9 (MR 5133)
[ci:skip-build] already built successfully in CI
2024-05-15 16:39:41 -07:00
Oliver Smith d1f7e3ca7d channels.cfg: add initial v24.06 branch
Related: issue 2819
2024-05-15 21:06:57 +02:00
Stefan Hansson 2975d16ac8 pmaports.cfg: set pmbootstrap_min_version=2.3.0 (MR 5046)
The change from unmaintained to archived needs changes in pmbootstrap.

[ci:ignore-count]
[ci:skip-vercheck]: Packages aren't being changed
[ci:skip-build]: All packages verified to build separately and would
take too long to build in CI
2024-05-15 17:08:00 +02:00
Stefan Hansson b29ebae96b CI: rename "device/unmaintained" to "device/archived" (MR 5046) 2024-05-15 17:07:51 +02:00
Stefan Hansson fb7f99efe2 device: rename unmaintained to archived (MR 5046)
Unmaintained is a name which on multiple occasions have seen lead to
confusion with people having the impression that unmaintained is for all
unmaintained devices, which is not how we're really using it. Many
devices in testing do not actually have a maintainer, yet there has been
no push to move these out of there and into unmaintained.

I think this is a result of that unmaintained was introduced not to keep
unmaintained ports but rather a place to store ports that have a better
replacement but where the inferior one still holds some sort of value,
such as for debugging purposes. These ports also are not necessarily
entirely unmaintained and see more fixes than many ports in testing.

While one approach to solving this problem could be to simply moving all
unmaintained ports to unmaintained, I think this comes with some
problems: It would require an initial effort to figure out which ports
are indeed unmaintained and which just don't have a maintained noted in
the package, and given how many ports there are in testing this would be
a big endeavour. It would also require continuous work on moving ports
into unmaintained as the maintainers go silent if we are to keep testing
and unmaintained's state consistent with reality. Additionally, just
because a port doesn't have a maintainer on paper doens't mean that
there aren't people who aren't willing to fix it up if there are issues
that arise.

As such, I think the way to go is renaming unmaintained to better
reflect the original intent. Thanks to Luca Weiss for suggesting
"archive", and to Arnav Singh for suggesting that "archived" would match
the other category names better.
2024-05-15 17:07:51 +02:00
knuxify 1be51a1472 main/postmarketos-base-ui-gnome: add gcr-ssh-agent to depends (MR 5120)
The SSH agent built into gnome-keyring has been disabled by default
in version 46, and replaced by the SSH agent implementation in gcr.
Install the new implementation to provide a graphical SSH agent
for all GNOME-based UIs.

Follow-up to aports!63893, which fixes this upstream and adds this
dependency to the upstream gnome package.

Fixes #2728.
[ci:skip-build]: already built successfully in CI
2024-05-15 14:00:36 +02:00
Adam Thiede f78a7fd8c5 linux-postmarketos-mediatek-mt8173: upgrade to 6.9 (MR 5125)
Default answers to `pmbootstrap kconfig migrate` with 'y' to any
seemingly relevant Mediatek entries.

[ci:skip-build]: already built successfully in CI
2024-05-14 22:36:15 +02:00
Oliver Smith ff2f4a108a gitlab/issue_template: add confidential issue note (MR 5131) 2024-05-14 21:09:45 +02:00
Oliver Smith f77febc40e gitlab/issue_template: drop v23.06 (MR 5131) 2024-05-14 21:09:44 +02:00
Lost-Entrepreneur439 33dc6ef65f samsung-afyonltecan: new device (MR 5009) 2024-05-14 14:57:20 +02:00
Sicelo A. Mhlongo 8d570a7847 linux-postmarketos-omap: upgrade to 6.9.0 (MR 5127)
[ci:skip-build]: already built successfully in CI
2024-05-14 09:06:29 +02:00
Jianhua Lu 293d2783f8 linux-postmarketos-qcom-sm8250: upgrade to 6.9.0 (MR 5123)
[ci:skip-build]: already built successfully in CI
2024-05-13 17:01:59 +02:00
Stefan Hansson b15ff1601c CI: fix deprecation warning (MR 5126)
Fixes this warning:

    warning: `ruff <path>` is deprecated. Use `ruff check <path>` instead:
2024-05-13 16:19:06 +02:00
Stefan Hansson 6a1f7a1623 CI: clarify which commit to put [ci:ignore-count] in (MR 5126)
I've seen confusion about this in the past where people would find it
unclear which commit to put this in.
2024-05-13 16:16:18 +02:00
Stefan Hansson 79b8de8483 CI: replace lots of print statements with a single one (MR 5126)
This way it's easier to edit the text.
2024-05-13 16:16:18 +02:00
jane400 1ffe60ab67 linux-lenovo-21bx: enable touchscreen driver (MR 5124)
[ci:skip-build]: already built successfully in CI
2024-05-13 15:34:39 +02:00
Robert Eckelmann d633f78749 main/postmarketos-base-ui: add font-twemoji as _pmb_recommends (MR 4755)
[ci:skip-build]: already built successfully in CI
2024-05-11 22:39:01 +02:00
saikat edc8e01dc7 realme-porsche: new device (Realme GT 2) (MR 4425)
[ci:skip-build]: already built successfully in CI
2024-05-11 12:38:54 +02:00
Anton Bambura 23d54f5ee4 powkiddy-x55: adjust for postmarketos-base-ui-cage (MR 5097) 2024-05-11 13:31:12 +03:00
Anton Bambura 466d30eb24 main/postmarketos-ui-moonlight: new aport (MR 5097) 2024-05-11 13:31:12 +03:00
Anton Bambura b66b6ea92e main/postmarketos-ui-cage: add myself as co-maintainer (MR 5097) 2024-05-11 13:31:12 +03:00
Anton Bambura 7f28bc2338 main/postmarketos-ui-cage: use postmarketos-base-ui-cage (MR 5097) 2024-05-11 13:31:12 +03:00
Anton Bambura eb0e92bf04 main/postmarketos-base-ui-cage: new aport (MR 5097)
Based on current postmarketos-ui-cage
2024-05-11 13:31:12 +03:00
Teemu Ikonen 356171e852 temp/gtk4.0: upgrade to 4.14.4 (MR 5119)
[ci:skip-build]: already built successfully in CI
2024-05-10 19:11:39 +02:00
Alexander Martinz 409d5d5616 device-shift-otter: new device (MR 4884)
Heavily based on z3ntu's work on FP5, thanks for all your work!

Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build]: already built successfully in CI
2024-05-09 11:02:07 -07:00
SSD 089d7cc987 main/postmarketos-initramfs: stowaway rootfs (MR 4386)
[ci:skip-build]: already built successfully in CI
2024-05-09 08:32:23 -07:00
Stefan Hansson 8a2904d341 linux-samsung-espresso10-downstream: fix build (MR 5102)
Part of https://gitlab.com/postmarketOS/pmaports/-/issues/2401

[ci:skip-build]: already built successfully in CI
2024-05-09 13:43:43 +02:00
Stefan Hansson 41f2cc0155 linux-samsung-m0-downstream: fix build (MR 5098)
Part of https://gitlab.com/postmarketOS/pmaports/-/issues/2401

[ci:skip-build]: already built successfully in CI
2024-05-09 13:40:37 +02:00
Stefan Hansson 0a78f50c73 linux-xiaomi-wt88047-downstream: fix build (MR 5103)
Part of https://gitlab.com/postmarketOS/pmaports/-/issues/2401

[ci:skip-build]: already built successfully in CI
2024-05-09 13:24:40 +02:00
Stefan Hansson f1e18c5475 linux-samsung-a5ulte-downstream: fix build (MR 5107)
Part of https://gitlab.com/postmarketOS/pmaports/-/issues/2401

[ci:skip-build]: already built successfully in CI
2024-05-09 13:15:59 +02:00
Stefan Hansson b295060231 linux-samsung-janice-downstream: fix build (MR 5105)
Part of https://gitlab.com/postmarketOS/pmaports/-/issues/2401

[ci:skip-build]: already built successfully in CI
2024-05-09 13:12:09 +02:00
Stefan Hansson 1a39ee6b56 linux-samsung-a5lte-downstream: fix build (MR 5108)
Part of https://gitlab.com/postmarketOS/pmaports/-/issues/2401

[ci:skip-build]: already built successfully in CI
2024-05-09 13:06:26 +02:00
Stefan Hansson a27034fe4b linux-htc-flounder-downstream: fix build (MR 5112)
Part of https://gitlab.com/postmarketOS/pmaports/-/issues/2401

[ci:skip-build]: already built successfully in CI
2024-05-09 13:03:04 +02:00
Stefan Hansson 033e3516f6 linux-huawei-kiwi-downstream: fix build (MR 5109)
Part of https://gitlab.com/postmarketOS/pmaports/-/issues/2401

[ci:skip-build]: already built successfully in CI
2024-05-09 12:38:43 +02:00
Stefan Hansson 5a338d90c2 linux-bq-paella-downstream: fix build (MR 5110)
Part of https://gitlab.com/postmarketOS/pmaports/-/issues/2401

[ci:skip-build]: already built successfully in CI
2024-05-09 11:09:22 +02:00
Stefan Hansson 0bc76bd8e9 linux-alcatel-idol347-downstream: fix build (MR 5111)
Part of https://gitlab.com/postmarketOS/pmaports/-/issues/2401

[ci:skip-build]: already built successfully in CI
2024-05-09 10:55:53 +02:00
Pablo Correa Gómez 4203227fd0 main/postmarketos-base-ui: add self-depend on base-ui-audio (MR 5091)
So that we can warranty that any of the packages is installed by
default. In addition, make sure that pipewire-pulse can never be
installed together with
postmarketos-base-ui-audio-pulseaudio. pipewire-pulse provides
pulseaudio, so installations that have pipewire-pulse already
installed would end up in a very weird position otherwise.

Fixes 87d355e08d
[ci:skip-build]: already built successfully in CI
2024-05-08 11:16:48 -07:00
Pablo Correa Gómez 1cabc5fb2a main/postmarketos-base-ui: disable wireplumber audio with pulseaudio (MR 5091)
This is necessary to avoid wireplumber messing with the sound when
pulseaudio is expected to take care of it.
2024-05-08 11:16:47 -07:00
Pablo Correa Gómez 59eecf22ec soc-qcom-sdm845: drop wireplumber subpackage (MR 5091)
It's now a dependency of pmos-base-ui
2024-05-08 11:16:47 -07:00
Pablo Correa Gómez ac8c63ebe2 main/postmarketos-base-ui-plasma: drop pipewire dependency (MR 5091)
Taken care by pmos-base-ui package
2024-05-08 11:16:47 -07:00
Pablo Correa Gómez d3d1989563 device-samsung-j7y17lte: remove pipewire-media-session file and replaces (MR 5091)
pipewire-media-session was dropped in alpine in
4dc6a181bf590339f29a279fb7c4b9ae3c26c5fa, more than one year ago, so
this should be safe

While at it, also drop pipewire dependency, that is now a dependency
of postmarketos-base-ui
2024-05-08 11:16:47 -07:00
Pablo Correa Gómez 387db85874 device-samsung-a6lte: remove pipewire-media-session file and replaces (MR 5091)
pipewire-media-session was dropped in alpine in
4dc6a181bf590339f29a279fb7c4b9ae3c26c5fa, more than one year ago, so
this should be safe

While at it, also drop the dep on pipewire, since it's taken care by
pmos-base-ui now
2024-05-08 11:16:47 -07:00
Pablo Correa Gómez 53a861f670 device-lenovo-21bx: remove pipewire subpackage (MR 5091)
This is not related to audio, and unnecessary since now pipewire is
installed by default
2024-05-08 11:16:46 -07:00
Pablo Correa Gómez b0d474ba3d main/postmarketos-base-ui: add pipewire and wireplumber (MR 5091)
These are increasingly needed for camera and screen sharing/recording
tasks. To make the development easier and future-proof, install them
by default. They can now be removed from the audio subpackage

Fixes #2785
2024-05-08 11:16:46 -07:00
681 changed files with 44366 additions and 9390 deletions

No files matched your search

+22 -21
View File
@@ -135,27 +135,28 @@ def get_changed_packages_sanity_check(count):
return
branch = get_upstream_branch()
print()
print("ERROR: Too many packages have changed!")
print()
print("This is a sanity check, so we don't end up building packages that")
print("have not been modified. CI won't run for more than three hours")
print("anyway.")
print()
print("Your options:")
print("a) If you *did not* modify everything listed above, then rebase")
print(f" your branch on the official postmarketOS/pmaports.git {branch}")
print(" branch. Feel free to ask in the chat for help if you need any.")
print("b) If you *did* modify all these packages, and you assume that")
print(" they will build within one hour: skip this sanity check by")
print(" adding '[ci:ignore-count]' to the commit message (then force")
print(" push).")
print("c) If you *did* modify all these packages, and you are sure that")
print(" they won't build in time, please add '[ci:skip-build]' to the")
print(" commit message (then force push). Make sure that all packages")
print(" build with 'pmbootstrap build --strict'!")
print()
print("Thank you and sorry for the inconvenience.")
print(f"""
ERROR: Too many packages have changed!
This is a sanity check, so we don't end up building packages that
have not been modified. CI won't run for more than three hours
anyway.
Your options:
a) If you *did not* modify everything listed above, then rebase
your branch on the official postmarketOS/pmaports.git {branch}
branch. Feel free to ask in the chat for help if you need any.
b) If you *did* modify all these packages, and you assume that
they will build within one hour: skip this sanity check by
adding '[ci:ignore-count]' to the commit message of the last
commit in the merge request (then force push).
c) If you *did* modify all these packages, and you are sure that
they won't build in time, please add '[ci:skip-build]' to the
commit message (then force push). Make sure that all packages
build with 'pmbootstrap build --strict'!
Thank you and sorry for the inconvenience.
""")
sys.exit(1)
+1 -1
View File
@@ -11,4 +11,4 @@ fi
set -x
# shellcheck disable=SC2046
ruff --ignore E501,F401,E722,W605 $(find .ci -name '*.py')
ruff check --ignore E501,F401,E722,W605 $(find .ci -name '*.py')
+1 -1
View File
@@ -16,11 +16,11 @@ fi
sh_files="
./main/mdss-fb-init-hack/mdss-fb-init-hack.sh
./main/postmarketos-base/rootfs-usr-lib-firmwareload.sh
./main/postmarketos-base-ui/rootfs-usr-lib-NetworkManager-dispatcher.d-50-dns-filter.sh
./main/postmarketos-base-ui/rootfs-usr-lib-NetworkManager-dispatcher.d-50-tethering.sh
./main/postmarketos-installkernel/installkernel-pmos
./main/postmarketos-initramfs/init.sh
./main/postmarketos-initramfs/init_functions.sh
./main/postmarketos-mkinitfs-hook-debug-shell/20-debug-shell.sh
./main/postmarketos-mkinitfs-hook-debug-shell/setup_usb_storage.sh
./main/postmarketos-mkinitfs-hook-netboot/netboot.sh
./main/ttyescape/*.post-install
+1 -1
View File
@@ -6,10 +6,10 @@ import stat
expected_directories = [
"cross",
"device/archived",
"device/community",
"device/main",
"device/testing",
"device/unmaintained",
"main",
"modem",
"non-free",
+8
View File
@@ -6,6 +6,8 @@ import glob
import pytest
import sys
import os
import re
from pathlib import Path
import add_pmbootstrap_to_import_path
import pmb.parse
@@ -40,3 +42,9 @@ def test_aports_kernel(args):
if "pmb:kconfigcheck-community" not in apkbuild["options"]:
raise RuntimeError(f"{aport_name}: \"pmb:kconfigcheck-community\" missing in"
" options= line, required for all community/main devices.")
# check for postmarketos-installkernel in makedepends when installing kernel with make
if bool(re.search("make z?install", Path(path).read_text(encoding="utf-8"))):
if "postmarketos-installkernel" not in apkbuild["makedepends"]:
raise RuntimeError(f"{aport_name}: \"postmarketos-installkernel\" missing in"
" makedepends, required when using make install/zinstall.")
+1 -1
View File
@@ -1,7 +1,7 @@
---
# global settings
image: alpine:edge
image: alpine:latest
before_script: &global_before_scripts
- apk upgrade -U
after_script:
+9 -3
View File
@@ -1,6 +1,12 @@
<!--
Thank you for using postmarketOS! In order to speed up process of resolving your issue,
we would like you to fill in the following :
we would like you to fill in the following form.
*** NOTE FOR CONFIDENTIAL ISSUES: ***
A lot of people can read confidential pmaports issues! If you want to
submit something that only the postmarketOS Core Team can see, write to
team@postmarketos.org
instead of opening an issue here!
-->
### Describe your issue
#### What's the expected behaviour?
@@ -21,8 +27,8 @@
Replace space inside `[ ]` with `x` to fill the checkbox
-->
* [ ] edge (`master` branch)
* [ ] `v23.12`
* [ ] `v23.06` (supported until 2024-01-18)
* [ ] `v24.06`
* [ ] `v23.12` (supported until 2024-07-16)
* [ ] I confirm that the issue still is present after running `sudo apk upgrade -a`
+15 -7
View File
@@ -16,7 +16,8 @@ device/*/*-google-veyron/ @jenneron
device/*/*-google-x64cros/ @jenneron @JustSoup321 @alpernebbi
device/*/*-htc-golfu/ @Newbyte
device/*/*-htc-m8qlul/ @Newbyte
device/*/*-lenovo-21bx/ @craftyguy
device/*/*-kobo-clara/ @akemnade
device/*/*-lenovo-21bx/ @craftyguy @jane400
device/*/*-lenovo-a6000/ @jenneron @Minecrell
device/*/*-lenovo-a6010/ @jenneron @Minecrell
device/*/*-librecomputer-lafrite/ @funderscore
@@ -40,7 +41,10 @@ device/*/*-samsung-espresso7/ @MightyM17 @antoni.aloytorrens
device/*/*-samsung-grandmax/ @wonderfulShrineMaidenOfParadise
device/*/*-samsung-gt510/ @TravMurav
device/*/*-samsung-gt58/ @TravMurav
device/*/*-samsung-j5/ @wonderfulShrineMaidenOfParadise
device/*/*-samsung-j5x/ @wonderfulShrineMaidenOfParadise
device/*/*-samsung-serranove/ @Minecrell
device/*/*-tolino-shine2hd/ @akemnade
device/*/*-videostrong-kii-pro/ @funderscore
device/*/*-wileyfox-crackling/ @TravMurav @Minecrell
device/*/*-xiaomi-beryllium/ @joelselvaraj
@@ -64,7 +68,7 @@ device/*/device-huawei-plank/ @gtrxAC
device/*/device-lg-judyln/ @Newbyte
device/*/device-lg-judyp/ @jenneron
device/*/device-microsoft-surface-rt/ @jenneron @jethrob
device/*/device-nvidia-tegra-armv7/ @clamor95 @okias @mschwalm @nokun
device/*/device-nvidia-tegra-armv7/ @clamor-s @okias @mschwalm @nokun
device/*/device-odroid-xu4/ @Grimler
device/*/device-oneplus-enchilada/ @calebccff
device/*/device-oneplus-fajita/ @calebccff
@@ -76,6 +80,7 @@ device/*/device-samsung-chagallwifi/ @Grimler
device/*/device-samsung-coreprimevelte/ @legolivesmatter @balejk
device/*/device-samsung-j5y17lte/ @andrisas
device/*/device-samsung-klimtlte/ @Grimler
device/*/device-samsung-lt01/ @knuxify
device/*/device-samsung-m0/ @Newbyte
device/*/device-samsung-manta/ @jenneron @alexmrqt
device/*/device-shift-axolotl/ @amartinz @calebccff @dylanvanassche
@@ -83,6 +88,7 @@ device/*/firmware-google-veyron-brcm/ @jenneron
device/*/firmware-odroid-xu4/ @Grimler
device/*/firmware-oneplus-sdm845/ @calebccff
device/*/firmware-powervr-gx6250/ @jenneron
device/*/kobo-epdc-extractor/ @akemnade
device/*/linux-google-nyan/ @jenneron
device/*/linux-google-veyron/ @jenneron
device/*/linux-huawei-plank/ @gtrxAC
@@ -90,12 +96,13 @@ device/*/linux-postmarketos-allwinner/ @Arnavion @PsychoGame
device/*/linux-postmarketos-amlogic/ @funderscore @exkc
device/*/linux-postmarketos-exynos4/ @Newbyte @ThiagaoPlusPlus
device/*/linux-postmarketos-exynos5/ @jenneron @Grimler
device/*/linux-postmarketos-grate/ @clamor95 @jenneron @jethrob
device/*/linux-postmarketos-grate/ @clamor-s @jenneron @jethrob
device/*/linux-postmarketos-imx-ereader/ @akemnade
device/*/linux-postmarketos-mediatek-mt8173/ @jenneron @adamthiede
device/*/linux-postmarketos-mediatek-mt8183/ @jenneron @binarycraft
device/*/linux-postmarketos-omap/ @MightyM17 @Sicelo
device/*/linux-postmarketos-qcom-msm8939/ @Newbyte
device/*/linux-postmarketos-qcom-msm8953/ @M0Rf30 @Ultra-azu
device/*/linux-postmarketos-qcom-msm8953/ @M0Rf30 @Ultra-azu @barni2000
device/*/linux-postmarketos-qcom-msm8996/ @Tooniis
device/*/linux-postmarketos-qcom-sc7180/ @jenneron
device/*/linux-postmarketos-rockchip/ @QC8086
@@ -116,8 +123,9 @@ device/*/u-boot-librem5/ @craftyguy @alistair23 @Newbyte
device/*/u-boot-pinebookpro/ @QC8086
device/*/u-boot-pinephone/ @Arnavion @PsychoGame
device/*/wl1251-cal/ @Danct12
main/gnome-software-plugin-pmos/ @andrisas
main/postmarketos-ui-plasma-mobile/ @bshah
main/postmarketos-upgrader-dbus/ @andrisas
main/postmarketos*gnome*/ @pabloyoyoista @Newbyte
main/postmarketos-initramfs/ @calebccff @craftyguy
main/postmarketos-ui-phosh/ @pabloyoyoista @Newbyte
main/postmarketos-ui-plasma-mobile/ @PureTryOut
main/shutdown-clear-rtc-wakealarm/ @Arnavion
main/ttyescape/ @calebccff
+7 -8
View File
@@ -8,50 +8,49 @@ branch_pmaports=master
branch_aports=master
mirrordir_alpine=edge
[v23.12]
announcement=https://postmarketos.org/blog/2023/12/18/v23.12-release/
[v24.06]
description=Latest release / Recommended for best stability
branch_pmaports=v24.06
branch_aports=3.20-stable
mirrordir_alpine=v3.20
[v23.12]
description=Old release (supported until 2024-07-16)
branch_pmaports=v23.12
branch_aports=3.19-stable
mirrordir_alpine=v3.19
[v23.06]
announcement=https://postmarketos.org/blog/2023/06/07/v23.06-release/
description=Old release (unsupported)
branch_pmaports=v23.06
branch_aports=3.18-stable
mirrordir_alpine=v3.18
[v22.12]
announcement=https://postmarketos.org/blog/2022/12/18/v22.12-release/
description=Old release (unsupported)
branch_pmaports=v22.12
branch_aports=3.17-stable
mirrordir_alpine=v3.17
[v22.06]
announcement=https://postmarketos.org/blog/2022/06/12/v22.06-release/
description=Old release (unsupported)
branch_pmaports=v22.06
branch_aports=3.16-stable
mirrordir_alpine=v3.16
[v21.12]
announcement=https://postmarketos.org/blog/2021/12/29/v21.12-release/
description=Old release (unsupported)
branch_pmaports=v21.12
branch_aports=3.15-stable
mirrordir_alpine=v3.15
[v21.06]
announcement=https://postmarketos.org/blog/2021/07/04/v21.06-release/
description=Old release (unsupported)
branch_pmaports=v21.06
branch_aports=3.14-stable
mirrordir_alpine=v3.14
[v21.03]
announcement=https://postmarketos.org/blog/2021/03/31/v21.03-release/
description=Old release (unsupported)
branch_pmaports=v21.03
branch_aports=3.13-stable
+2 -2
View File
@@ -8,7 +8,7 @@ fi
pkgname=busybox-static-aarch64
pkgver=1.36.1
pkgrel=26
pkgrel=29
_arch="aarch64"
_mirror="http://dl-4.alpinelinux.org/alpine/"
@@ -32,5 +32,5 @@ package() {
}
sha512sums="
0f5f1eb32691016183d9a3011c5643f70a1cdc9f49b1ffefce732cff960cfea4d0db1670564fff5504654bb2f07857e62e5dd076fb40d2c361c441854e5d5e5c busybox-static-1.36.1-r26-aarch64-edge.apk
3dd0da90cf278055d2c9e7710bb0389a5af74c0cabd9d786f4244ca4e36872dd307f8ff8a206479714d445fae903b2aa3292279ad737387d0584c7d34d98a274 busybox-static-1.36.1-r29-aarch64-edge.apk
"
+2 -2
View File
@@ -8,7 +8,7 @@ fi
pkgname=busybox-static-armhf
pkgver=1.36.1
pkgrel=26
pkgrel=29
_arch="armhf"
_mirror="http://dl-4.alpinelinux.org/alpine/"
@@ -32,5 +32,5 @@ package() {
}
sha512sums="
ad4db0c989c1a4773f75411c2749bcc8d25756d20396cdb6bfa59bd5ed14164928c602e9833101e584b28490971f6d43973a9c7de9c544693aef40dbe183cabc busybox-static-1.36.1-r26-armhf-edge.apk
3ed54a2b4c23a08dc066b585198fe81d39b5fd0d54347d9ab727d6bea73cfc4ad9a5fb55c25a3e59ef8fce6cc83a24f0807980f6d3ea6c05029522627192e716 busybox-static-1.36.1-r29-armhf-edge.apk
"
+2 -2
View File
@@ -8,7 +8,7 @@ fi
pkgname=busybox-static-armv7
pkgver=1.36.1
pkgrel=26
pkgrel=29
_arch="armv7"
_mirror="http://dl-4.alpinelinux.org/alpine/"
@@ -32,5 +32,5 @@ package() {
}
sha512sums="
f6664d29ecb22e396133116210d792e101fa552b4f4d2295de19af460830bbb151a2d3c4a7b7bbe1596d7b3ed85042f10dae49d78ae4e6ac053ed565f9043c01 busybox-static-1.36.1-r26-armv7-edge.apk
3b2124f93cd873440797b25b5c2456dfc441ff18831ae8a0540bd5ca67f3869766aa6a76e31b9f9d0a7382e760b0d8acb1e91599c65a72298fffbbd4aafc6175 busybox-static-1.36.1-r29-armv7-edge.apk
"
+2 -2
View File
@@ -3,7 +3,7 @@
pkgname=grub-efi-x86
pkgver=2.12
pkgrel=3
pkgrel=5
_arch="x86"
_mirror="http://dl-4.alpinelinux.org/alpine/"
@@ -22,5 +22,5 @@ package() {
}
sha512sums="
4bd0750236a556ad833c27892a55624a324e8ec7cadb0b7287cabd3a9cdded836357ae959aea7ba828be8727b86c6ed4844a1572b68ad3ce3f3e6f913e43ae72 grub-efi-2.12-r3-x86-edge.apk
3cc14376ad5dc2a4d8488d49199d1257c5024c8c4afcbcdf67a0cd7a66e75962191850cca4248ce13abf060b4d9e2fd0966ef6adeb38a00d58c9e4054eec1e9d grub-efi-2.12-r5-x86-edge.apk
"
+3 -3
View File
@@ -8,7 +8,7 @@ fi
pkgname=musl-aarch64
pkgver=1.2.5
pkgrel=0
pkgrel=1
arch="x86_64"
subpackages="musl-dev-aarch64:package_dev"
@@ -57,6 +57,6 @@ package_dev() {
}
sha512sums="
dddd12728842e84bf7d532901d9b9e26e2c8c86e25a3625329586c9088ec9b3825ce3e512c56b7e875b923905308b89494d31d7ca05ebda5485bd00de3954236 musl-1.2.5-r0-aarch64-edge.apk
061e68319d2069c211169d7f39b1da572a4c0ab56f8cfe5267c024921ea0e5f44ecc1cca6051bebaa9c83d067f0fd2cbc6b6b73d0e3075410eaf889a25cc82b4 musl-dev-1.2.5-r0-aarch64-edge.apk
5ad546aca584d77f6fcf7d92bc5e6432d8c32b3db2922a4099423649e674b5c149464bd0048021e50b18398a00382bbeb6a0a598148bea4fa6d783f5c4c4445d musl-1.2.5-r1-aarch64-edge.apk
b6fed1441c0eacfea0061967915a876ce0af79b83511d9b05ae7e7cf489d88e36a544fa7f7512f390429d7d0217b672c04a83dfceea603ce0e86d2a47c50f4cc musl-dev-1.2.5-r1-aarch64-edge.apk
"
+3 -3
View File
@@ -8,7 +8,7 @@ fi
pkgname=musl-armhf
pkgver=1.2.5
pkgrel=0
pkgrel=1
arch="x86_64"
subpackages="musl-dev-armhf:package_dev"
@@ -57,6 +57,6 @@ package_dev() {
}
sha512sums="
4d76f479017b6f666c36782183f3bdb3e58a48f7400cd125c129e380a8654cf99f685f8d3e97b51cb0199b59720a320e251dd9b89fe55ef8f542a043ab3e7355 musl-1.2.5-r0-armhf-edge.apk
7fa4e9ed4acb6292d46939a63e572eb92085e577bbfce75139a3ebef910434230fcbbb7a236efde7ad6d150d84e31c46edcfe835f4102cb9e68f062eb8488a1e musl-dev-1.2.5-r0-armhf-edge.apk
148883dfd80bb670df4c6a919aaf3334d203a87fac98df8046a920a2e4c1c3439347f5653abc2994e9a9fe2946764395cd83e2f2437ab903e37f8ad3fcc6637a musl-1.2.5-r1-armhf-edge.apk
052f4f3ff6974aadbe90c1a69c4b29a1fefc25d2f2f794b3d55ed49b79a94dab900592a65b3c80ae9824580eab4fb99cb2cfdf9399354e74a1804871d97774a0 musl-dev-1.2.5-r1-armhf-edge.apk
"
+3 -3
View File
@@ -8,7 +8,7 @@ fi
pkgname=musl-armv7
pkgver=1.2.5
pkgrel=0
pkgrel=1
arch="x86_64"
subpackages="musl-dev-armv7:package_dev"
@@ -57,6 +57,6 @@ package_dev() {
}
sha512sums="
74e482403f77b9d302a4bb0ad6b86a18e81b5be0eb987296a4b0033c996e474b86eac079abc52bd8f02723aa242ea2a74e61bbd0eee036fbf79a21ae250a6e04 musl-1.2.5-r0-armv7-edge.apk
02321d629aaa3712546b01645f1eb308f5e25e49bc3c2c42eff3a7cf84cd60327c6bc9818ebeb7d1d9556ddfaa2e132fdab0dc2142eec4df3a799e3402329c49 musl-dev-1.2.5-r0-armv7-edge.apk
f3da7602184940c3ca4ddc973fd127fe08eb5e9141cf4c22cf49ccf131ef836b7f697f20dc64c7e18661f88779354c8b93c14521d18fb2e83d10638c3c8ed7d5 musl-1.2.5-r1-armv7-edge.apk
b2678887dfc565691d92c1604137d984c5ce68f7c39c1ec2fd7200d4df4f818d4690c323f93b76ca1d4498a5dc36dff61959e06cc749099c706f85601d915d8e musl-dev-1.2.5-r1-armv7-edge.apk
"
+3 -3
View File
@@ -8,7 +8,7 @@ fi
pkgname=musl-riscv64
pkgver=1.2.5
pkgrel=0
pkgrel=1
arch="x86_64"
subpackages="musl-dev-riscv64:package_dev"
@@ -57,6 +57,6 @@ package_dev() {
}
sha512sums="
c11fb5eed8dab05504d88660a4750981a40020a1609b4ec4f9184cf7645283893e7cafc48da471012a4095699d371517cc9e09c0ec73fef4612280c95feebca2 musl-1.2.5-r0-riscv64-edge.apk
77eba42ed78e680419f838f47a9a9f17d42288259540b70792af23b22f85ba1d2f87958e7db77b11b43629d8593fa58a02902453ecb0a46dd7c33cfca750b820 musl-dev-1.2.5-r0-riscv64-edge.apk
822f24faaf2285174742788da0dceef3bada4dbd0db9f67362876b3c0ab6bc647a0f2f0cc70e2e28dbb90121f08b65640a344e7cae8416a84bfb389db32e7d9c musl-1.2.5-r1-riscv64-edge.apk
04ac4a81d713f71b68082767ce2afab3ce458730664c140f49a0b33f257666a6b4289c5b53935fe16345f8445a458e5307511773651c4574526cfaaf232c239a musl-dev-1.2.5-r1-riscv64-edge.apk
"
+3 -3
View File
@@ -8,7 +8,7 @@ fi
pkgname=musl-x86
pkgver=1.2.5
pkgrel=0
pkgrel=1
arch="x86_64"
subpackages="musl-dev-x86:package_dev"
@@ -57,6 +57,6 @@ package_dev() {
}
sha512sums="
7403427bbe6683739ce00c0396dc4bfa8fce2f3e4957d12bc6c31bfb1a60bafca9e7ba266d1ba7ca469ab3738874965cf25e8f3bd838c002b4e5aad702a79e18 musl-1.2.5-r0-x86-edge.apk
f5b0dfe7543bd7d1de3bfc8617c61fb7287227ea4dd9a722bfd4ec99e8a9405826973375a81a380b04bcba419c18e292cf60aaf1c9503eec3b420ed7adbacd68 musl-dev-1.2.5-r0-x86-edge.apk
53a30a57f0db29e8d73d7190590fce18a19bcd358f9b0f3d4fa0b8821dad4ed5f1065c3c07dbc373a23cbd98c9a9dc1c2c2d864ac88eefd53dc5f89d8e57ed67 musl-1.2.5-r1-x86-edge.apk
e9178fcfe27bdc7568c35889cff8cf20829f67460fd6dc22a6ca0465063a809081ee1267b4275432d23d1e7d457a4b207a0ff11c678233c4e430a1173d4ccea8 musl-dev-1.2.5-r1-x86-edge.apk
"
+3 -3
View File
@@ -8,7 +8,7 @@ fi
pkgname=musl-x86_64
pkgver=1.2.5
pkgrel=0
pkgrel=1
arch="aarch64"
subpackages="musl-dev-x86_64:package_dev"
@@ -57,6 +57,6 @@ package_dev() {
}
sha512sums="
8bb997e077850195621916ee0722be7e054086fa5c2907c7d290ee8892910c073e3aece13a2839589966987711f4af6b2f4bffdc6c45d636a24655ef9cbec101 musl-1.2.5-r0-x86_64-edge.apk
5d93191c3c9bf03b466dc169b57e519f0165c6551d117ae09538907c57a49f58afa3c9225aafc7a61625f224276eff4ee2dbe79d65cf684d03a46c24dd78aa4c musl-dev-1.2.5-r0-x86_64-edge.apk
5506970c66b6da294d32961e94cadc6926a7405915a3d4dd519ed8c2aae829f2fbfaab2ccc8d0794f4aa102aa3e8cbd62099aa54668a11ac0c5072f59befece6 musl-1.2.5-r1-x86_64-edge.apk
bd2602e59831ba860a548c8281bb62be3382b4035f18c9e36350be644db61a762a413e1d696697d402a57d4bc565faf86c2a212e27c9b9a890d765f794bbe829 musl-dev-1.2.5-r1-x86_64-edge.apk
"
@@ -0,0 +1,22 @@
From c6b821b1281f7ce2b54aad3b0b2acd0e29039c8f Mon Sep 17 00:00:00 2001
From: Stefan Hansson <newbyte@postmarketos.org>
Date: Mon, 6 May 2024 10:59:58 +0200
Subject: [PATCH] Fix lzma piggy
---
arch/arm/boot/compressed/piggy.lzma.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/compressed/piggy.lzma.S b/arch/arm/boot/compressed/piggy.lzma.S
index d7e69cffbc0..cfea81ae8f4 100644
--- a/arch/arm/boot/compressed/piggy.lzma.S
+++ b/arch/arm/boot/compressed/piggy.lzma.S
@@ -1,4 +1,4 @@
- .section .piggydata,#alloc
+ .section .piggydata, "a"
.globl input_data
input_data:
.incbin "arch/arm/boot/compressed/piggy.lzma"
--
2.45.0
@@ -0,0 +1,22 @@
From 6083916292864215fe4af6c0829186d5cc520f7f Mon Sep 17 00:00:00 2001
From: Stefan Hansson <newbyte@postmarketos.org>
Date: Mon, 6 May 2024 19:08:35 +0200
Subject: [PATCH] Fix lzo piggy
---
arch/arm/boot/compressed/piggy.lzo.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/compressed/piggy.lzo.S b/arch/arm/boot/compressed/piggy.lzo.S
index a425ad95..236976d8 100644
--- a/arch/arm/boot/compressed/piggy.lzo.S
+++ b/arch/arm/boot/compressed/piggy.lzo.S
@@ -1,4 +1,4 @@
- .section .piggydata,#alloc
+ .section .piggydata, "a"
.globl input_data
input_data:
.incbin "arch/arm/boot/compressed/piggy.lzo"
--
2.45.0
@@ -1,4 +1,4 @@
# Unmaintained: Downstream port, only for testing. Use mainline port (alcatel-idol347)!
# Archived: Downstream port, only for testing. Use mainline port (alcatel-idol347)!
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-alcatel-idol347-downstream
pkgdesc="Alcatel OneTouch Idol 3 (4.7) (Downstream)"
@@ -1,4 +1,4 @@
# Unmaintained: Downstream port, only for testing. Use mainline port (bq-paella)!
# Archived: Downstream port, only for testing. Use mainline port (bq-paella)!
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-bq-paella-downstream
pkgdesc="BQ Aquaris X5 (Downstream)"
@@ -1,4 +1,4 @@
# Unmaintained: Downstream port, only for testing. Use mainline port (htc-flounder)!
# Archived: Downstream port, only for testing. Use mainline port (htc-flounder)!
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-htc-flounder-downstream
pkgdesc="Google Nexus 9"
@@ -1,4 +1,4 @@
# Unmaintained: Downstream port, only for testing. Use mainline port (huawei-kiwi)!
# Archived: Downstream port, only for testing. Use mainline port (huawei-kiwi)!
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-huawei-kiwi-downstream
pkgdesc="Huawei Honor 5X (Downstream)"
@@ -1,4 +1,4 @@
# Unmaintained: Downstream port, maybe useful for EPDC performance improvement
# Archived: Downstream port, maybe useful for EPDC performance improvement
# needs special userspace to show up anything
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-kobo-clara-downstream
@@ -1,4 +1,4 @@
# Unmaintained: Downstream port, only for testing. Use mainline port (motorola-ocean)!
# Archived: Downstream port, only for testing. Use mainline port (motorola-ocean)!
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-motorola-ocean-downstream
pkgdesc="Motorola Moto G7 Power"
@@ -1,4 +1,4 @@
# Unmaintained: Downstream port, only for reference. Use mainline port (oneplus-cheeseburger)!
# Archived: Downstream port, only for reference. Use mainline port (oneplus-cheeseburger)!
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-oneplus-cheeseburger-downstream
pkgdesc="OnePlus 5 (Downstream)"
@@ -1,4 +1,4 @@
# Unmaintained: Downstream port, only for reference. Use mainline port (oneplus-dumpling)!
# Archived: Downstream port, only for reference. Use mainline port (oneplus-dumpling)!
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-oneplus-dumpling-downstream
pkgdesc="OnePlus 5T (Downstream)"
@@ -1,4 +1,4 @@
# Unmaintained: Downstream port, only for testing. Use mainline port (samsung-a5lte)!
# Archived: Downstream port, only for testing. Use mainline port (samsung-a5lte)!
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-samsung-a5lte-downstream
pkgdesc="Samsung Galaxy A5 (SM-A500F)"
@@ -1,4 +1,4 @@
# Unmaintained: Downstream port, only for testing. Use mainline port (samsung-a5ulte)!
# Archived: Downstream port, only for testing. Use mainline port (samsung-a5ulte)!
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-samsung-a5ulte-downstream
pkgdesc="Samsung Galaxy A5 (SM-A500FU)"
@@ -1,5 +1,5 @@
# Unmaintained: Downstream port, only for testing. Use mainline port (samsung-coreprimevelte)!
# This kernel is used only for bringing up new features, thus unmaintained
# Archived: Downstream port, only for testing. Use mainline port (samsung-coreprimevelte)!
# This kernel is used only for bringing up new features, thus archived
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-samsung-coreprimevelte-downstream
pkgdesc="Samsung Galaxy Core Prime VE LTE downstream"
@@ -1,4 +1,4 @@
# Unmaintained: Downstream port, only for testing. Use mainline port (samsung-espresso10/samsung-espresso7)!
# Archived: Downstream port, only for testing. Use mainline port (samsung-espresso10/samsung-espresso7)!
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-samsung-espresso10-downstream
pkgdesc="Samsung Galaxy Tab 2 (10.1 inch)"
@@ -1,4 +1,4 @@
# Unmaintained: Downstream port
# Archived: Downstream port
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-samsung-expressatt-downstream
pkgdesc="Samsung Galaxy Express SGH-I437"
@@ -1,4 +1,4 @@
# Unmaintained: Downstream port, only for reference. Use mainline port (samsung-janice)!
# Archived: Downstream port, only for reference. Use mainline port (samsung-janice)!
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-samsung-janice-downstream
@@ -1,9 +1,9 @@
# Unmaintained: Downstream port, only for testing. Use mainline port (samsung-klte)!
# Archived: Downstream port, only for testing. Use mainline port (samsung-klte)!
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-samsung-klte-downstream
pkgdesc="Samsung Galaxy S5 (SM-G900F)"
pkgver=1
pkgrel=3
pkgrel=2
url="https://postmarketos.org"
license="MIT"
arch="armv7"
@@ -1,14 +1,19 @@
# Unmaintained: Downstream port, only for testing. Use mainline port (samsung-lt01)!
# Archived: Downstream port, only for testing. Use mainline port (samsung-lt01)!
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-samsung-lt01wifi-downstream
pkgdesc="Samsung Galaxy Tab 3 8.0"
pkgver=1
pkgrel=0
pkgrel=1
url="https://postmarketos.org"
license="MIT"
arch="armv7"
options="!check !archcheck"
depends="postmarketos-base linux-samsung-lt01wifi-downstream mkbootimg"
depends="
postmarketos-base
postmarketos-initramfs-minimal
linux-samsung-lt01wifi-downstream
mkbootimg
"
makedepends="devicepkg-dev"
subpackages="$pkgname-nonfree-firmware:nonfree_firmware"
source="deviceinfo
@@ -1,9 +1,9 @@
# Unmaintained: Downstream port, only for testing. Use mainline port (samsung-m0/samsung-m3)!
# Archived: Downstream port, only for testing. Use mainline port (samsung-m0/samsung-m3)!
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-samsung-m0-downstream
pkgdesc="Samsung Galaxy S III"
pkgver=3
pkgrel=3
pkgrel=4
url="https://postmarketos.org"
license="MIT"
arch="armv7"
@@ -12,6 +12,7 @@ depends="
linux-samsung-m0-downstream
mkbootimg
postmarketos-base
postmarketos-initramfs-minimal
"
makedepends="devicepkg-dev"
install="$pkgname.post-install"
@@ -1,4 +1,4 @@
# Unmaintained: Downstream port, only for testing. Use mainline port (samsung-on7xelte)!
# Archived: Downstream port, only for testing. Use mainline port (samsung-on7xelte)!
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-samsung-on7xelte-downstream
pkgdesc="Samsung Galaxy J7 Prime"
@@ -1,5 +1,5 @@
# Unmaintained: Downstream port, only for testing. Use mainline port (shift-axolotl)!
# This kernel is mostly used for bringing up new features on mainline, thus unmaintained
# Archived: Downstream port, only for testing. Use mainline port (shift-axolotl)!
# This kernel is mostly used for bringing up new features on mainline, thus archived
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-shift-axolotl-downstream
pkgdesc="SHIFT6mq downstream"
@@ -1,4 +1,4 @@
# Unmaintained: Downstream port, only for reference.
# Archived: Downstream port, only for reference.
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-xiaomi-cepheus-downstream
pkgdesc="Xiaomi Mi 9"
@@ -1,5 +1,5 @@
# Unmaintained: Downstream port, only for testing. Use mainline port (xiaomi-lavender)!
# This kernel is mostly used for bringing up new features on mainline, thus unmaintained
# Archived: Downstream port, only for testing. Use mainline port (xiaomi-lavender)!
# This kernel is mostly used for bringing up new features on mainline, thus archived
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-xiaomi-lavender-downstream
pkgdesc="Xiaomi Redmi Note 7 downstream"
@@ -1,4 +1,4 @@
# Unmaintained: Downstream port, only for testing. Use mainline port (xiaomi-wt88047)!
# Archived: Downstream port, only for testing. Use mainline port (xiaomi-wt88047)!
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-xiaomi-wt88047-downstream
pkgdesc="Xiaomi Redmi 2 (Downstream)"
@@ -1,4 +1,4 @@
# Unmaintained: Downstream port, only for testing. Use mainline port (htc-flounder)!
# Archived: Downstream port, only for testing. Use mainline port (htc-flounder)!
pkgname=firmware-htc-flounder-downstream
pkgver=1.0
pkgrel=0
@@ -1,4 +1,4 @@
# Unmaintained: not needed by mainline kernel, describes only the hardware
# Archived: not needed by mainline kernel, describes only the hardware
pkgname=firmware-kobo-clara-downstream
pkgver=4.26.16704
pkgrel=0
@@ -1,4 +1,4 @@
# Unmaintained: Downstream port, only for reference. Use mainline port (samsung-janice)!
# Archived: Downstream port, only for reference. Use mainline port (samsung-janice)!
pkgname=firmware-samsung-janice-downstream
pkgver=1
@@ -1,4 +1,4 @@
# Unmaintained: Only used by unmaintained downstream kernel
# Archived: Only used by archived downstream kernel
# Maintainer: knuxify <knuxify@gmail.com>
pkgname=firmware-samsung-lt01wifi-downstream
pkgver=0.1
@@ -1,4 +1,4 @@
# Unmaintained: Only used by unmaintained downstream kernel
# Archived: Only used by archived downstream kernel
pkgname=firmware-samsung-m0-downstream
pkgver=3
pkgrel=0
@@ -1,4 +1,4 @@
# Unmaintained: Only used by unmaintained downstream kernel
# Archived: Only used by archived downstream kernel
# Reference: <https://postmarketos.org/devicepkg>
pkgname=firmware-samsung-on7xelte-downstream
pkgver=1
@@ -1,10 +1,10 @@
# Unmaintained: Downstream port, only for testing. Use mainline port (alcatel-idol347)!
# Archived: Downstream port, only for testing. Use mainline port (alcatel-idol347)!
# Reference: <https://postmarketos.org/vendorkernel>
# Kernel config based on: arch/arm/configs/idol347_defconfig
pkgname=linux-alcatel-idol347-downstream
pkgver=3.10.49
pkgrel=1
pkgrel=2
pkgdesc="Alcatel Idol 3 4.7 downstream kernel fork"
arch="armv7"
_carch="arm"
@@ -38,6 +38,9 @@ source="
smb1360-dump-idol347.patch
smb1360-dump-$_smb_tag.c::https://raw.githubusercontent.com/msm8916-mainline/linux/$_smb_tag/drivers/power/supply/smb1360-dump.c
smb1360-like-mainline-idol347.patch
linux3.4-ARM-8933-1-replace-Sun-Solaris-style-flag-on-section.patch
linux3.4-fix-piggy.gzip.S.patch
linux3.7to4.5-ARM64-remove-Sun-Solaris-style-flag-on-section.patch
"
builddir="$srcdir/$_repository-$_commit"
_outdir="out"
@@ -73,4 +76,7 @@ bab8a081879b5e4b0d8f280fda099fde5f47eab62e8eb3aa50c36475edafc2e6b70aba5b9eec56bc
594017763bc82b29a24f18e3b3f9275eebbb720422ef1c1ea4d2d598baa1bb54761bc6f452d94b2079f7a6c6f6d0b7606684cca137a2b91a1c5fb94b2140e8fa smb1360-dump-idol347.patch
f61902474ab221a85a8910dcfbc48736e323a6bbc83896f778bb87d356464679c62ddf1c583e660a5c3c790dba420cce6cb9ca59b720234846dac7e80aa47368 smb1360-dump-v5.11.7-msm8916.c
33fe78be59acf7df9f0043819b66f79dba1fe2cd43cddedc361c17bb29454e1a55a5cd4825e9e61e45e7415986caddb795c0aefbd2fe8c631ffae24f2042bac1 smb1360-like-mainline-idol347.patch
9e3b067fa1b19ad02500c4fce1b6142051df3845c508e615788beb650c4f953683107ac2d80670c4e3df38f532e0e91060d2d13ec04c9ec985abd2dfa82e900b linux3.4-ARM-8933-1-replace-Sun-Solaris-style-flag-on-section.patch
080745ca4ecaa804ee1df26ea81975ca93b74372e0c08322a6c481e97807495ae6ceb6cc77653afa24f9f2df45da8ebf8e5de6b06037fbb08e0279877ce42188 linux3.4-fix-piggy.gzip.S.patch
75545ccd0082a119b9ad95fcef3523c939a5c946f8f3a5c3dde15cee1502f6c1011050a0ad5359426f018bb7ceea1c97a28c7665941bc89f365c8d11065ce0f6 linux3.7to4.5-ARM64-remove-Sun-Solaris-style-flag-on-section.patch
"
@@ -0,0 +1 @@
../../.shared-patches/linux/linux3.7to4.5-ARM64-remove-Sun-Solaris-style-flag-on-section.patch
Loaded 100 of 681 files, more files were not shown because too many files have changed in this diff. Show more