Enable support for generating systemd-boot configs on SDM845 devices
while continuing to support the Android boot image.
This additionally switches over the flash method to fastboot-bootpart,
so the pmOS boot and root partitions are exported seperately. The
expectation is that users STOP using the subpartitioning scheme and
flash the two partitions separately.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
- Enable XFS (requested by @ell1e)
- Disable CONFIG_RT_GROUP_SCHED (kconfigcheck-community requirement)
[ci:skip-build] already built successfully in CI
Add postmarketos-base-ui-wayland
Move _pmb_recommends to x11 and wayland subpackages
[ci:skip-build] Was built before
Co-authored-by: jane400 <5940129-jane400@users.noreply.gitlab.com>
This new daemon implements the same D-Bus API as callaudiod
in aports community/callaudiod, but works with the new audio profiles
generated by PulseAudio v17 and PipeWire v1.2 for pine64-pinephone
that the aports package's daemon does not.
Installs that use pipewire-pulse for audio (eg SXMO) will automatically start
having working call audio with this update. Installs that use pulseaudio
have to wait for pulseaudio's crash on startup to be fixed first
( https://gitlab.alpinelinux.org/alpine/aports/-/merge_requests/68586 ).
Ref: #2968
[ci:skip-build] already built successfully in CI
This provides a daemon that implements the same D-Bus API as callaudiod
in aports community/callaudiod, but works with the new audio profiles
generated by PulseAudio v17 and PipeWire v1.2 for pine64-pinephone
that the aports package's daemon does not.
This daemon is specific to the pine64-pinephone since it has
a hard-coded list of profiles and ALSA devices. If other devices also happen
to have UCM settings that trigger PulseAudio / PipeWire to generate
the combinatorial audio profiles that callaudiod cannot handle, and if
a callaudiod fix / alternative does not appear, then the maintainer (me) is
open to making this daemon more broadly useful for other devices, say by
having the hard-coded strings in device-specific config files.
Ref: #2968
The package name is wrong now (!5315), and the service stuff is
automatically installed by systemd-service
[ci:skip-build]: already built successfully in CI
We have access to the fancy runners since GitLab.com donate premium to
us. There's no downside to making the most of them while we can. We
don't depend on them, but they'll make our CI go zoom!
For the next few months until we migrate to self-hosted :D
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Fixes:
- ignore leading/trailing whitespace in files (MR 55)
- fix spelling typo in manpage
- add missing /usr/sbin symlinks for UsrMerge (MR 53)
[ci:skip-build]: already built successfully in CI
I use the PineTab 2 for various tasks on a semi-regular basis, so I
would like to co-maintain it.
---
[ci:skip-vercheck]:
Since this doesn't affect the resulting package as Co-Maintainer is a
postmarketOS schema extension that abuild doesn't read, there is no need
to bump pkgrel for this.
[ci:skip-build]: already built successfully in CI
- Added some modules to fix booting from emmc/nvme (fixes#2953)
- Partially fixes debug shell (#2955): the OSK still shows partially,
but at least now there's some usable console/shell with an external
usb keyboard.
[ci:skip-build] already built successfully in CI
This moves the responsibility to auto-repair filesystems to the
initramfs. (I think we don't do this at all right now).
We don't try to mount broken partitions at all, we tell the user
that the system is broken and fail_to_boot.
The flow is now:
1. mount the boot partition (read-only) for initramfs-extra
2. initramfs-extra is extracted (with the needed fsck executables)
3. fsck the root partition
4. mount root partition (read-write)
5. fsck the boot partition
6. mount the boot partition (read-write)
This helps with the systemd bringup, as we want to make use of
systemd-firstboot, which sets /etc and enabled services up. As
this service is responsible of setting up /etc, it is run before
/etc/fstab is read and before / is remounted read-write.
Since the v6.9 upgrade the kernel supports Type-C functionality for
Fairphone 4, but I forgot to enable the relevant kconfig options then.
Enable them now along with a bunch of options related to USB that come
in useful. Also prepare some options that will be used in the future
with DisplayPort over USB-C (e.g. SBU mux).
[ci:skip-build]: already built successfully in CI
... and install the firmware package using _pmb_recommends instead.
Applied to both downstream and mainline ports.
[ci:skip-build]: already built successfully in CI
With the latest kernel bump the config was updated based on the output
of:
make ARCH="$_carch" CC="${CC:-gcc}" defconfig KBUILD_DEFCONFIG=librem5_defconfig
but there are other changes that pop up when running
pmbootstrap kconfig edit linux-purism-librem5
This commit updates the config so that future config empty edits don't
generate any changes.
This is still pretty in sync with the Purism config, besides passing the
`kconfig check` and disablling SELinux as that causes boot failures.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[ci:skip-build]: already built successfully in CI
Updated to latest collabora cros kernel. Fixes audio on mt8192 devices
and fixes display issues on all devices using this kernel.
[ci:skip-build]: already built successfully in CI
Move the kernel config options from the pmbootstrap code to pmaports, so
it can be changed per branch, and it can be changed at the same time as
we actually make the changes to the kernel configs.
Replace previous code that used internal pmbootstrap code with running
pmbootstrap directly. pmbootstrap doesn't really have a stable API yet,
so calling the internal code is always a bit fragile and now that we
have reworked a lot of its code, this is all broken.
The trade-off is that it is now slower and the output isn't as pretty,
but we can finally use kconfigcheck.toml from the pmaports branch. So it
is worth it!
Add the required dependencies and config for both hexagonrpcd and
libssc so that sensors start working.
[ci:skip-build]: already built successfully in CI
Add the required dependencies and config for both hexagonrpcd and
libssc so that sensors start working.
[ci:skip-build]: already built successfully in CI
The device already loads plenty of nonfree-firmware into the
co-processors during the bootloader stages, and also once booted in
Linux won't really be useful without everything.
Additionally I doubt anyone tests that case, so just require nonfree
firmware unconditionally to simplify maintenance.
This gets Bluetooth working for the Sparklan card.
btattach doesn't work on the Librem5 at the moment (see [1]) so even
though it's deprecated let's use hciattach to get things working.
1: https://source.puri.sm/Librem5/librem5-base/-/issues/76
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[ci:skip-build] already built successfully in CI
I made an oversight in pmaports!5295 which caused the post-install
script to try enabling the sd8x-wlan service even if the downstream
subpackage isn't installed. This causes errors when creating a new
mainline rootfs, so fix it by moving the install variable declaration to
the subpackage function.
Patches were rebased, sadly nothing was dropped :(
All kconfig changes are from simply running `kconfig migrate` and
accepting all defaults when prompted
[ci:skip-build]: already built successfully in CI
Resolves this harmless, but annoying error on mainline:
* Enabling wlan driver ...
/lib/rc/sh/openrc-run.sh: line 14: can't create /sys/devices/platform/sd8x-rfkill/pwr_ctrl: nonexistent directory
* ERROR: sd8x-wlan failed to start
[ci:skip-build]: already built successfully in CI
This also increases the (necessarily) hardcoded initrd end by 16MiB in
the DTS, which is necessary to make the phone boot with the new
initramfs (and in general any initramfs which exceeds 2624KiB).
This wasn't actually getting run on boot because After=graphical.target
created an ordering issue and systemd was disabling it.
I saw this ordering issue in the journal after finding that pbsplash was
still running in the background after the UI loaded, and confirmed it by
running systemd-analyze.
The referenced commit had surfaced a bug with the unlocking code, which
would attempt to change the output of find_root_partition while the
cached PMOS_ROOT is stale and active. Clear this variable to force
find_root_partition to find the new rootfs value.
Fixes: 7030e08e7b ("postmarketos-initramfs: check for root subpartition (MR 5048)")
[ci:skip-build]: already built successfully in CI
This seems to be some Samsung's proprietary verified boot solution.
After a recent update, this started bootlooping my phone.
I have no idea why it only fired now, but pmOS does not use this
feature anyway, so it won't hurt to disable it.
[ci:skip-build] Already built fine once
Drop the console-shell hook in favour of stuffing buffyboard into the
initramfs. This makes it possible to get a debug shell directly on the
device without needing to use a computer.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
[ci:skip-build]: already built successfully in CI
Rework the messages and avoid re-spawning the splash on every check.
Additionally, add a call to check_keys, this lets users drop to a debug
shell or export logs to triage this failure (particularly useful for
hard-to-reproduce issues).
Finally, add a (liberal) 30 second timeout and dump logs at the end. If
we're just waiting for a device to show up and it doesn't after 30
seconds then it's probably never going to...
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
In mount_subpartition we currently try to look for the boot partition,
to see if we're done (either we aren't using subpartitions or we found
the right one). However it is possible that a device might have
originally used the subpartition scheme, but was later converted to have
a real boot partition (for EFI for example).
In this scenario, the boot partition would be found immediately, but the
root subpartition would not be.
Address this by making mount_subpartition check for success by calling
find_root_partition instead of find_boot_partition. For most
installations this has no impact.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Which can have significant performance impact on affected devices,
such as the Librem5 or the PinePhone.
The patch already landed upstream, however a new release is likely
several weeks or months away, making a backport worthwhile.
[ci:skip-build]: already built successfully in CI
Install a kill-pbsplash systemd service which is configured to be
started as part of the graphical-session user target. Additionally
install an override so that if the display-manager service (aliases to
gdm, sddm, etc) fails to start it will still kill pbsplash.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Co-authored-by: Clayton Craft <clayton@craftyguy.net>
Currently, dtbtool-sprd has an argument -p which accepts the path to the
dtc binary. When it's not provided, it should use the dtc binary installed
in the system as a fallback. However, that's not the case. The following
error is reported:
Found file: test.dtb ... skip, failed to scan for 'sprd,sc-id = <' tag
...even though test.dtb has the `sprd,sc-id` property.
In order to mitigate such issues, install dtc as a dependency of the
package.
Without it some devices will fail to mount the boot partition:
FAT-fs (mmcblk1p1): IO charset ascii not found
Also disable CONFIG_RT_GROUP_SCHED.
Reported-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
[ci:skip-build]: already built successfully in CI
This cmdline argument is now a no-op. Drop it everywhere and add a new
CI check to enforce this.
Adjust the deprecated "minimal" initramfs variant to use
pmos.debug-shell to enable logging instead. It doesn't /support/
dropping to a shell, so the variable takes on a different meaning. But
that's ok since it's at least more consistent.
[ci:ignore-count]
[ci:skip-vercheck]
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Tweaked-by: Oliver Smith <ollieparanoid@postmarketos.org>
[ci:skip-build]: kernel builds are very likely to go through now
* drop maxcpus=0, which was added with 73a033328e ("device-nokia-n900: set
uniprocessor mode for kernel (MR 4299)") while troubleshooting. a better
fix was eventually implemented with 3e737241ba ("linux-postmarketos-omap:
N900: disable twl off idle features (MR 4317)")
* drop PMOS_NO_OUTPUT_REDIRECT, which was obsoleted by 7c98127746
("postmarketos-initramfs: switch to udev and kmod (MR 5000)")
Use stock WiFi firmware instead of the generic linux-firmware-brcm
firmware. The stock firmware is newer and seems to be better suited
for the BCM4334B2 variant used in these tablets.
This fixes timeout errors from the brcmfmac driver and seems to
slightly improve download/upload speeds (by about 1MB/s).
This updates the minimal initramfs to be at the same version that
postmarketos-initramfs was when it was split off. This should have been
done as a part of !5000.
The changelog from git:
- main/postmarketos-initramfs: fix stowaway (MR 5206)
- main/msm-fb-refresher: move cleanup from initramfs into msm-fb-refresher (MR 5191)
- main/postmarketos-mkinitfs-hook-debug-shell: Cleanup debug-shell telnet server (MR 5191)
- main/postmarketos-initramfs: Allow packages to define cleanup hooks (MR 5191)
- main/postmarketos-initramfs: update comment on why we mount /boot (MR 5089)
- main/postmarketos-initramfs: add options for charset to mount vfat /boot (MR 5089)
- main/postmarketos-initramfs: add some sane mount options to /boot (MR 5089)
- main/postmarketos-initramfs: stowaway rootfs (MR 4386)
- main/postmarketos-initramfs: add crc32_generic module for F2FS (MR 4973)
- main/postmarketos-initramfs: add USB booting support (MR 4947)
- main/postmarketos-initramfs: fix starting unudhcpd when no UDC configured (MR 4907)
- postmarketos-initramfs: bigger log image size (MR 4880)
- main/postmarketos-initramfs: allow redirect logs to pmsg device (MR 4800)
Introduce support for having CI automatically update packages using
project access tokens and scheduled pipelines.
The pipeline schedule is configured with an additional variable
containing a list of packages to update, the autoupdate-fetch.sh script
then calls a handler for each of these, the handler is expected to check
for an update, make the necessary APKBUILD changes and commit them.
After all packages have been updated, the changes are pushed to pmaports
master using a project access token.
[ci:skip-build] takes too long to build in CI
trailblazer is a bleeding edge, unstable target for EFI capable ARM64
devices. It runs linux-next and should otherwise be adjusted to support
as many devices as possible.
The goal of trailblazer is to motivate more upstream kernel development by
providing a tighter feedback loop (patches land in -next weeks before they
make it into mainline or stable), as well as encouraging more generic
solutions to the device specific hacks we have in userspace.
On supported devices, trailblazer should reflect the current state of
upstream. It allows users to easily appreciate what feature are
unavailable, and more importantly appreciate when a new feature does get
added upstream.
Due to the instability of linux-next, the plan is to have BPO build
trailblazer images nightly, so if next breaks then the images should
only be broken for a day.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Introduce a linux-next kernel with postmarketOS configs and some
additional device specific configs enabled.
This kernel package will be updated daily to the latest -next tag.
breakages expected. It is designed to be used in tandem with a generic
ARM64 device package to provide a bleeding edge option for those with
EFI capable bootloaders.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Fixes:
- flash_android_bootimg: check validate target partition size before flashing (MR 63)
- copy target dtb to a temp directory for qcom and sprd dt.img types (MR 57)
Other:
- ci: add integration test for exynos qcdt (MR 57)
- ci: switch to unpackbooting from osm0sis (MR 57)
[ci:skip-build] already built successfully in CI
pma!5000 added a new implicit dependency on libinput, because it
specified libinput files in the initramfs file hook. mkinitfs considers
it fatal if it cannot find files listed in a file hook.
Later this could be 'optimized' by adding a -libinput subpkg and an
`install_if=libinput-libs` to add this file hook so it's not installed
everywhere... but the size increase isn't too much for UIs.. someone can
do this later.
> libinput-libs-1.26.0-r0 installed size:
> 476 KiB
This fixes a missing dependency problem where a UI (e.g. "none") doesn't
normally depend on libinput, and mkinitfs would fail because these files
were missing.
mdev is slow and missing features, it also requires that we load all the
modules that we include at once making the boot process slower.
udev is required for unl0kr (and buffyboard), it can also load modules
on demand (and asynchronously). Making the boot process considerably
faster on devices, especially for generic images where we have lots of
drivers for different display panels in the initramfs.
Additionally, import full fat modprobe from the kmod package, this is
required to support compressed modules.
This brings us more in line with other distros and generally improves
compatibility.
If devices use broken kernel modules which don't correctly define
modalias', these drivers may not be loaded by udev. This should be fixed
by defining the missing modalias statements in the driver.
This also runs udev earlier in the init, so that display drivers are
loaded before the splash in case they are needed.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Co-authored-by: Clayton Craft <clayton@craftyguy.net>
[ci:ignore-count]
[ci:skip-build]: already built successfully in CI
This incorprates the debug-shell functionality directly into the
initramfs, so it's no longer necessary to build and boot a custom
initramfs in order to debug your device.
Additionally, the behaviour of the debug-shell is entirely reworked, It
now creates an ACM serial gadget which can be accessed via any normal
terminal emulator (picocom, minicom, etc; or PuTTY on windows). Rather
than just invoking sh, the debug-shell now creates a respawning getty on
both the new virtual console and the active console (this will either be
the UART console or tty0/1).
It is necessary to spawn these shells via getty since the logging rework
means we can no longer assume that stdin/out/err reference a TTY.
In addition to the above, it is now possible to trigger a log dump by
holding volume up during boot. This can be useful for helping users
debug their devices if the issue doesn't result in a failure that can be
detected in the initramfs.
With these changes, the console-shell and debug-shell hook packages are
reduced to only adding the additional tools/features. console-shell is
still required for fbkeyboard, and debug-shell for the setup_usb_storage
tool.
Co-Developed-by: Clayton Craft <craftyguy@postmarketos.org>
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
For some reason globbing doesn't work properly for empty directories,
adjust the check in run_hooks to ensure the directory both exists and
contains something, otherwise we get an error about
"/hooks-cleanup/*.sh" not existing.
/ # mkdir blah
/ # for x in blah/*; do echo $x; done
blah/*
/ # touch blah/beep
/ # for x in blah/*; do echo $x; done
blah/beep
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
I somehow hit a case where this wasn't installed and
/lib/mdev/persistent-storage wasn't available. Let's just explicitly
depend on mdevd...
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
This step is the most likely to go wrong or have issues, and it has side
effects which can make it difficult to run multiple times on one boot.
Move it to after hooks so that e.g. when dropping to a debug shell, we
land before the first call.
This also makes booting to hooks a faster in many cases.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
fallocate seems to cause some strange behaviour where the logs.img file
is treated like it's empty. Given it's small and in a ramdisk let's just
create it with dd instead.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
This fixes the annoying "sh: write error" and "Couldn't write to clear
UDC" messages that happen on every single boot.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Rework logging to always log the initramfs output to the kernel
ringbuffer and deprecate PMOS_NO_OUTPUT_REDIRECT in favour of following
the kernel loglevel.
I know it seems silly to use syslogd for this, but it's necessary to
buffer writes to /dev/kmsg per-line if we want to correctly set the log
level, and "tee" does not do this (it will write multiple lines at once,
resulting in "<14>" prints in the ringbuffer). The main advantage to
this is that we won't have kernel logs cut in half by initramfs logs
anymore, everything will be nicely line buffered!
The previous logging solution of multiple "tail" commands would actually
fail to log up to the last few lines before a crash due to how tail
works (it polls the file and buffers lines).
I attempted something like this before, but I stopped after running into
ratelimiting issues. These are now resolved by configuring the
printk_devkmsg sysctl.
Dropping PMOS_NO_OUTPUT_REDIRECT:
The general motivations behind PMOS_NO_OUTPUT_REDIRECT was to avoid
cluttering up the console with initramfs logs when they aren't wanted;
this is now handled instead by the kernels logging facility. We log to
the ringbuffer at LOGLEVEL_INFO, so if "quiet" is specified on the
cmdline (or the loglevel is otherwise set above info) then initramfs
logs will also not be shown.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
We plan to make a lot of changes to the initramfs which will require
incresaing the size. There are some devices that have literally no free
space for this, so make a -minimal initramfs fork that can continue to
support those while we update the regular initramfs.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
I'm not able to give this device the attention it deserves.
This also removes me from maintaining fw and kernel packages used by the
L5, and adds the current L5 maintainers to those packages.
[ci:skip-vercheck]
[ci:skip-build]: already built successfully in CI
papers is now in community in alpine, and is the GTK4
replacement. Current main version (still not available in alpine),
fits phone screens, but makes sense to change it already now.
Relates #1479
[ci:skip-vercheck] changes are in pmb_recommends
[ci:skip-build]: already built successfully in CI
Depend on msm-firmware-loader, firmware- and soc- packages.
Sort deps alphabetically.
Tidy up deviceinfo:
* add flash_kernel_on_update
* remove unneded things from kernel cmdline
[ci:skip-build]: already built successfully in CI
Currently it requries the check_code result check in the
vendor uboot to be disabled as explained in the wiki.
Booting directly via reconfigured boot order still
does not work. It hangs somewhere in the kernel.
Firmware for Wifi/BT is not included yet.
It could use the linux-postmarketos-omap kernel in the future,
but there are still some dirty things in there e.g. for sound
which are not suitable for a multi-device kernel.
[ci:skip-build]: already built successfully in CI
Bump to the 6.6.32 release, including updating the config with the
latest changes from Purism.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[ci:skip-build]: already built successfully in CI
PineTab 2 is a successor to the original PineTab from PINE64 released
in mid-2023.
The tablet came with DanctNIX's fork of Arch Linux ARM, comes with
K Desktop Environment as the UI and available with 64GB eMMC/4GB RAM
or 128GB eMMC/8GB RAM.
Changelog since 6.7:
General:
* Adreno 5xx preemtion is now disabled due to hangs it causes.
This makes GPU a lot more cooperative on these platforms.
* Fixed absence of zap-shader region which caused devices with
GPU enabled to freeze the whole system.
* Fixed ath10k Wi-Fi not connecting to 5Ghz networks.
* Incorporated in-kernel pd-mapper patchset, therefore userspace
pd-mapper daemon is not required.
* Kernel cmdline from bootloader is no longer ignored completely,
in other words, not hardcoded. You can now modify cmdline in
deviceinfo file and changes in that file will not be ignored.
Devices:
* Xiaomi Redmi Note 7 (lavender):
* split device trees into 2 variants by panel type (Tianma & BOE)
* GPU + panel support for 2 variants
* Vibrator support
* Connectivity: modem, Wi-Fi and bluetooth support.
* Other/all devices:
* update device trees according to upstream USB stack changes
(related to USB 3 phy support)
Install script into /etc/profile.d with workaround for mesa bugs.
This makes most SDM660 devices usable for general people out of the box.
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Add msm-firmware-loader, soc-qcom-sdm660-rproc, firmware-xiaomi-lavender
and firmware-qcom-adreno-a530 as dependency. This is necessary to make
Wi-Fi and modem work.
Add support for panel drivers.
commit 933f2b5703 ("device-nokia-n900: improve sxmo-dwm support [MR 5227]")
accidentally removed sxmo lock state initialization. Restore the lock state
initialization
Phoc now defaults to 1,25 as scale on skomer, which while not perfect,
is good enough and lets the device be unlocked. As such, let's remove
this configuration file and encourage improvements upstream instead.
See https://gitlab.com/postmarketOS/pmaports/-/merge_requests/4541
170189393b (device-nokia-n900: add upower support and config (MR 4397) added
an upower config, but did not provide a subpackage to actually install it on
device. Add the needed subpackage.
[ci:skip-build]: already built successfully in CI
(1) the deviceprofile differs from upstream 1.16.3 in the following respects:
(a) -export SXMO_NO_KEYBOARD=1 - allow use of the virtual keyboard
(b) +export SXMO_DMENU_LANDSCAPE_LINES="10"
+export SXMO_DMENU_PORTRAIT_LINES="6" - these two adjust the size of the
displayed dmenu menu.
* NB: All foregoing changes are already merged in sxmo-utils master.
(c) +export SXMO_TOUCHSCREEN_ID="TSC2005 touchscreen" - allows sxmo to
reliably toggle touch screen's enabled status
* The foregoing change is awaiting acceptance by upstream.
(2) The start hook differs from upstream 1.16.3 by the removal of the line that
starts conky. That program pegs N900 CPU usage at 100% all the time. This
change is not upstreamable, at least not for the time being
And configure any modem to be able to use it, so that we can keep
controlling things like bluetooth headsets, and take phone calls from a
car.
[ci:skip-build]: already built successfully in CI
Upstream MR has been closed by Dylan 2 months ago, and this feature is
already present in pipewire. We are doing considerably amount of work to
get Pipewire production-ready in postmarketOS, including features to let
users choose. Given HFP support is actually a nice-to-have feature, but
not a great requirement, our fork is outdated (aports is on 17.0), and that
the upstream MR has been dropped and is not being worked on, it might be
time to drop this.
At some point the driver started using symlinks w/ machine IDs for
finding/loading fw, and for some reason I thought it was a good idea to
not install those symlinks.
Fixes this failure when loading the brcmfmac driver:
brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43752-sdio.purism,librem5r4.bin failed with error -2
[ci:skip-build]: already built successfully in CI
With the current kernel, ds2482 w1<>i2c module is not automatically
loaded at boot, which prevents loading the ds2784 battery module.
Signed-off-by: Alexandre Marquet <tb@a-marquet.fr>
[ci:skip-build]: already built successfully in CI
This fixes op6 display panel support, drm error spam in dmesg, and
various other minor things.
It also enabled dynamic debugging and ftrace.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
This allows users to test out pipewire audio on phosh. Currently the
default audio backend is pulseaudio. This is configured in pmos-base-ui.
fixes#2013
[ci:skip-build]: already built successfully in CI
I have noticed a bug. Because is some cases, uuid for the boot partition is set, it won't reach logic for the stowaway.
[ci:skip-build]: already built successfully in CI
For now, limited support without graphics. Graphics
support would need messing and detecting board variants.
especially since Rev B seems to need a vcom setting per batch.
[ci:skip-build]: already built successfully in CI
Latest release of "old" lk2nd.
Release notes:
- msm8974 improvements
- New variants for few Samsung devices, some renames
- Added Lenovo Vibe K5 variants
New devices:
- Vivo Y21L
- Motorola Moto G 4G
- Huawei G7 Plus
- Samsung Galaxy On7 2015 (SM-G600FY)
- HTC One M8
- Samsung G360T
Added big patch to fix compile errors with gcc-14.
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
[ci:skip-build]: already built successfully in CI
Add postmarketos-artwork-wallpapers to _pmb_recommends, so Sxmo shows
the postmarketOS wallpaper.
Related: https://todo.sr.ht/~mil/sxmo-tickets/602
Related: pmaports issue 2499
[ci:skip-build]: already built successfully in CI
Set the postmarketOS wallpaper as default for Plasma Mobile and Plasma
Desktop, so we can change it across all UIs with every postmarketOS
release.
It would be nice if we could just set the wallpaper with a simple config
file (reported https://bugs.kde.org/show_bug.cgi?id=487816). Until that
is possible, use a shell script as workaround.
Copy the contents dir and metadata.json file explicitly, instead of
copying the entire "meadow" directory. With this change we avoid copying
meadow.svg, which fixes two issues:
* This file doesn't have a stable name, when we switch to the next
wallpaper and the user had selected it, the wallpaper will just be
gone instead of automatically switching to the new wallpaper.
* It shows up as broken wallpaper in Plasma's wallpaper selection.
[ci:skip-build]: already built successfully in CI
Add support for the Xiaomi Miatoll phones. There are currently two
device trees in the upstream kernel.
Signed-off-by: David Wronek <david@mainlining.org>
The original maintainer unfortunately has bricked their phone. Drop the
device package in preparation for the SM7125 kernel upgrade.
Signed-off-by: David Wronek <david@mainlining.org>
The device trees for this phone have never been upstreamed
unfortunately. Drop the device package in preparation for the SM7125
kernel upgrade.
Signed-off-by: David Wronek <david@mainlining.org>
These modules are required in the initramfs when booting a kernel that
builds them as modules (i.e. not builtin)
[ci:skip-build] already built successfully in CI
- Add support for systems with merged /usr (MR 39)
- Improve support for deviceinfo format (MR 52)
- Add support for systemd (MR 51)
- Document archive compression formats/levels (MR 50)
[ci:skip-build] already built successfully in CI
Since 6.10-rc1 python3 is now a hard requirement to compile the kernel,
it's used to generates headers for drm/msm. Add it now so our CI can
keep working.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
- fix NM unit name
- relocate an errant -openrc pkg
- remove iio-sensor-proxy from service autostart on systemd, it appears
that this is dbus activated (inspected the .service file, no `Install`
section and using dbus directive)
This allows the audio switching backend stuff to work on all UIs (see
!5072 / 87d355e08). For example, users of any UI can switch audio
backends by installing one of the pmos-base-ui-audio-* metapackages.
[ci:skip-build] already built successfully in CI
- Merge pulseaudio and audio-pulse subpkgs
Just general cleanup, there's no reason to have a separate pulseaudio
subpackage now since both were being installed anyways (one indirectly
depended on the other)
- Add 'none' option for audio backend
Some users might not want to have an audio backend installed taking
up disk space. For example they're running a headless server or just
don't want audio I/O, and PA + dependencies, which include mesa(!!)
can be a lot... I measured 208MB
Note about drop the pulseaudio subpkg and it's "provides="...
This was done in 6e325417, when pmos-base-ui was split off from
pmos-base (3 years ago). I'm not sure how many people are still rocking
a 3yo pmOS install, but the original package (see 92e43e83) was only
pulled in by install_if, so I think the chance that it's in someone's
world file would be really really low.
Sxmo maintainers have decided to stay with OpenRC on postmarketOS. Set
this option, so pmbootstrap doesn't even ask the user if they want to
install Sxmo with systemd. The idea is that users don't end up
reporting issues about this unsupported use case.
Allow this package to be used on systemd installs without pulling in a
bunch of openrc services.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Co-authored-by: Clayton Craft <clayton@craftyguy.net>
Not sure if dropping the networkmanager-openrc dependency causes issues.
Otherwise, make the elogind subpackage conflict with systemd-logind.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
He did an awesome job adding an initial port for this device but hasn't
helped to maintain it, so I'm removing him from the list of active maintainers.
For installing openrc-specific dependencies, specifically
nftables-openrc which is needed because the post-install enables the
openrc service and expects the initd script to be available then
[ci:skip-build] already built successfully in CI
And add it to pmb_recommends. This way new installations with
pmb_recommends will force install the correct version.
[ci:skip-build]: already built successfully in CI
And remove the compatibility symlinks again, all kernels running now
should use the .mbn files already.
[ci:skip-build]: already built successfully in CI
Loaded 100 of 758 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Caleb Connolly
Henrik Grimler
Arnav Singh
adamthiede
Jianhua Lu
postmarketOS CI
Clayton Craft
Anri Dellalandjane400
Raymond Hackley
Anton Bambura
Gus Antoniassi
Richard Acayan
Stefan Hansson
Danct12
jane400
Sergey Lisov
Luca Weiss
Duje Mihanović
Alistair Francis
Dylan Van Assche
WeirdTreeThing
Oliver Smith
neokitty
Nikita Travkin
Luca Weiss
Martijn Braam
fossdd
Eisenbahnfan
Ferass El Hafidi
Ts0p0sT
Federico Amedeo Izzo
sn0w
Robert Mader
methanal
Gianluca Boiano
Sicelo A. Mhlongo
Barnabás Czémán
wire_witch
knuxify
Brian Cole
Pablo Correa Gómez
kubntd
Andreas Kemnade
Alexey Minnekhanov
Mighty
Alexandre Marquet
SSD
Willow Barraco
mae
Johannes Marbach
David Wronek
Bart RibbersandClayton Craft
Sam DayandClayton Craft