Add a dummy subpackage that does not install any kernel. This is useful
for testing 'pmbootstrap install' code quickly without actually
downloading and installing a kernel package.
- fix wifi signal quality display, since /proc/net/wireless is no longer
available in omap kernel
Suggested-by: DvaMishkiLapa <thesame.personal@gmail.com>
- add `polkit-elogind` so tools like `loginctl poweroff` and `nmtui` do not
require sudo under i3wm
[ci:skip-build]: already built successfully in CI
For a lot of people having the 1 second timeout results in not finding
the sim at all. Let's rather wait up to 4 seconds for the sim to appear,
it was reported that 3 is enough in a report where 1 wasn't.
Related: issue 2072
[ci:skip-build]: already built successfully in CI
The call_audio_idle_suspend_workaround init service was moved to the
-pulseaudio subpackage, but the -modem subpackage still had a
.post-upgrade referring to it. This moves that to the (recently) new
-pulseaudio package
[ci:skip-build]: already built successfully in CI
Out of the box audio is really quiet and distorted on SDM845 devices when
using PipeWire. This can be worked around by forcing audio to 16 bits
(which PulseAudio uses by default and thus works). This seems to be a
kernel problem and should be fixed properly there but for now we can
apply this workaround to at least be able to switch to PipeWire anytime
soon. The actual workaround is applied by Wireplumber so the dependency
for the subpackage is set to that.
Upstream issue https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3193
[ci:skip-build]: already built successfully in CI
It doesn't build currently (issue 2146) and also it's not used by any
device package currently (with other ports we support selecting between
mainline and downstream kernel in some cases, but not here).
If it's useful, the build can be fixed and it can be added back in a
future patch.
changes:
- don't try to set gnss-share socket in geoclue
- install Alsa UCM configs from purism
Upstream ucm is broken when migrating from the purism ucm, so let's
just use ucm from purism until someone upstreams something that works.
What I upstreamed was based on an older ucm from Purism, what they are
shipping is more correct than upstream ucm...
This reverts commit 70b7813fee.
fixes#2134
[ci:skip-build] already built successfully in CI
The forked version includes some new API, but the maintainer wants to
have things as-close-as-possible to upstream. Since APK mostly keeps track
of libraries versions, having the same API version as upstream (there's no
stable ABI for mutter), makes it possible for APK to confuse with non-mobile
mutter. By having an unrealistic API version, we make sure this does not happen
to us.
Fixes#2127
Due to an issue, probably in bluez, the bluetooth service often fails to
start on boot. Restarting the service later make bluez start correctly.
While adding the service supervisor for just this issue isn't a great
solution, in any case having a supervisor on such an important system
service is good, and it fixes this issue also by restarting the
bluetooth service after the first failure on boot.
May 30 08:05:56 fairphone-fp4 daemon.info bluetoothd[1420]: Bluetooth daemon 5.66
May 30 08:05:56 fairphone-fp4 daemon.err bluetoothd[1420]: src/main.c:main() Unable to get on D-Bus
Also while we're editing the list of subpackages make sure they're
ordered alphabetically.
[ci:skip-build]: already built successfully in CI
The `firmware-pine64-pinebookpro` predates the firmware for this device
being available upstream. It is now packaged in two separate packages:
linux-firmware-brcm and linux-firmware-rockchip.
Install those two linux-firmware packages and drop the custom one. This
drop a custom firmware package and also ensure that firmware is kept up to
date with the rest of linux-firmware-*.
The resulting installation includes all the previously included firmware
files and I've confirmed that both sound and wifi work fine (dmesg
indicates bluetooth is available too).
In 11682fb0ab, the timeout was set to 10
hours. This means that the CI no longer just runs for one hour. However,
we are still limited by GitLab's runners which only give us three hours
of CI time per job, so given the status quo, this is the most likely
duration for someone who hasn't set up their own CI runners.
This also enables a few other things for Amlogic SBCs, including some
kernel config that enables video decoding support, however userspace
still doesn't support it (e.g. requires patched ffmpeg)
[ci:skip-build] already built successfully in CI
Previously, this extra rule was needed to grant regular users
permissions for the embedded display's backlight. It no longer seems to
be necessary; the presence of this rule is currently a no-op.
Someone else on IRC has tested removing the rule and also confirms this
new behaviour. I suspect this was fixed upstream in eudev.
Since codeaurora.org has been shut down and this project seemingly
hasn't been migrated to git.codelinaro.org, let's switch to a source
found on GitHub.
Rebase of sdm660 patchset on top of linux-stable/linux-6.3.y
branch.
Notable changes:
* New device: HMD Global Nokia 6.1 (nokia-pl2)
* New device: Xiaomi Mi A2 (xiaomi-jasmine_sprout)
* usage of pmb:kconfigcheck-community only
* LOCALVERSION is no longer set in kconfig, but at build time
Signed-off-by: Gianluca Boiano <morf3089@gmail.com>
[ci:skip-build] already built successfully in CI
USB tethering allows users to use their phone's WiFi or WWAN interface
as an access point for the device they connect the phone with over USB.
This way, they can use their data plan with a laptop or desktop when
regular Internet access is absent.
Configure NetworkManager to manage the usb0 iface from initfs so users
can configure it in GNOME Settings or KDE. Include a NetworkManager
dispatcher script as well to handle postmarketOS' setup with unudhcpd as
we want to provide an SSH login over USB when tethering is disabled. If
tethering is enabled, unudhpcd is stopped and its functionality is taken
over by NetworkManager through an instance of dnsmasq. NetworkManager
will also configure the necessary settings to allow IP forwarding and
firewall rules during tethering. Once disabled, NetworkManager cleans up
these settings and our dispatcher script starts unudhcpd again.
Due to upstream changes, NetworkManager requires networkmanager-dnsmasq
subpackage as dependency as dnsmasq needs DBus support for
NetworkManager. Without it, NetworkManager will silently fail spawning
dnsmasq instances.
[ci:skip-build]: already built successfully in CI
GNOME Console can now launch command-line applications from .desktop
files, so they are no longer "useless" in Phosh.
gnome-extensions-app hasn't been pulled in automatically in Phosh for
long. If users install this manually, it would be confusing for it to
not show up. The app itself has an error message that explains they
need to be logged into GNOME for it to work when launched in e.g.
Phosh, so I think that should take care of UX concerns. Additionally,
this package is installed in gnome-mobile as well, where
gnome-extensions-app actually is useful.
firefox-safe-mode has been removed in Alpine:
- https://git.alpinelinux.org/aports/commit/community/firefox?id=438ee43621e1a83c8309bf7e5e14ba9fce0532ff
- https://git.alpinelinux.org/aports/commit/community/firefox-esr?id=0f324c8b39ab08cc3f504e4ae959425bec472791
Considering all of this, postmarketos-hidden-desktop-entries no longer
serves a purpose, so let's remove it.
All Asteroid apps are launched with the "invoker" which needs the
booster running. Make sure this happens when the UI starts.
Alternatively we could use superd to launch it but for a single
executable this is good enough for now.
Make sure the GPU can register its thermal device to avoid this error:
[ 9.303081] adreno 3d00000.gpu: [drm:msm_devfreq_init] *ERROR* Couldn't register GPU cooling device
[ci:skip-build]: already built successfully in CI
Add most config options for pmbootstrap kconfig check --community
CONFIG_SMP is left out since we have no mulitprocessor systems
using this kernel.
[ci:skip-build]: already built successfully in CI
0.8.1:
Fixes:
- get_free_space: always return an integer (MR 31)
0.8:
Features:
- Add support for gummiboot
- Many internal code improvements and bug fixes, see git log for
details
Fixes:
- Fix destination space calculation (MR 28)
- Support destination paths with spaces
[ci:skip-build] already built successfully in CI
Add support for the Qualcomm Robotics (RB3) dev kit, the Thundercomm
DB845c. This is a successor to the arrow 410c board already supported in
postmarketOS. It is based on the SDA845 SoC, almost identical to SDM845
but without a fully featured modem.
All the things you'd expect to work out of the box:
* UART
* USB host and peripheral
* HDMI display out
* Wifi, Bluetooth
The upcoming db845c doesn't have cellular modem capabilities, but still
has wifi. Avoid installing modem related configs and services by default
and only install it for devices that need it.
Needed by GNOME Software since
https://gitlab.alpinelinux.org/Cogitri/apk-polkit-rs/-/merge_requests/45
GNOME Software is often installed in GNOME UI's through pmb_recommends,
but it's not a dependency in any way. To avoid spilling this service
enablement everywhere, add just the openrc subpackage from the daemon.
That means that if GNOME Software is not installed or gets uninstalled,
the daemon will crash on startup. That should not be a big deal though.
[ci:skip-build] already built successfully in CI
This uses a dispatcher script to configure filtering A and AAAA records
based on which IP versions are routable on the NM primary connection.
gojq is preferred over the 'standard' jq because it's considerably
faster... the dispatcher script took 0.89s on my L5 with jq, and 0.07s
with gojq. the difference is probably greater on slower phones... so it
seemed worth installing it.
fixes#1430
Co-authored-by: Arnavion <me@arnavion.dev>
-Removed 0013-media-ov5640-Update-last-busy-timestamp-to-reset-aut.patch:
Fix should now be incorporated in 6.3 kernel.
[ci:skip-build]: Already built successfully in CI
As a preparation for #1836, move the sourcing of deviceinfo to its own
function. This should allow to have a single point in the whole of the
initramfs for the sourcing of the deviceinfo, instead of every script
that needs it sourcing it. This allows to change the way deviceinfo is
sourced in the future with a lot less effort.
- Add msm8916-1mic configuration for devices without SecondaryMic
- Fix audio volume after upstream msm8916-wcd-digital changes
[ci:skip-build]: already built successfully in CI
harpia's WCNSS firmware has problems with WiFi channels on some device
variants, using osprey's firmware seems to help as a workaround.
Install that by default so WiFi has better chances of working properly
out of the box.
[ci:skip-build]: already built successfully in CI
It has been dropped from Alpine due to being unmaintained and it's
dependencies not building against the latest kmime (23.04) anymore
[ci:skip-vercheck]
[ci:skip-build]
Sipeed M1s DOCK is a development board from Sipeed, it is based on
M1s module.
The Sipeed M1s introduces the BL808 SoC from Bouffalo Lab, the
BL808 is also used in Pine64 0x64 development board.
[ci:skip-build]: already built successfully in CI
The kernel source replaced with the lineageos version.
It fix the compile issues and the contains security fixes.
[ci:skip-build]: Already built successfully in CI
The pmaports package will follow lts releases from now on.
Intermediate versions will be tagged in the
gitlab.com/exynos5-mainline/linux repo.
Also enable CONFIG_LRU_GEN while we are at it (but not
CONFIG_LRU_GEN_ENABLED for now).
[ci:skip-build]: already built successfully in CI
And use gitlab.com/exynos4-mainline/linux as source so that we no
longer have to carry all the patches in pmaports.
[ci:skip-build]: Already built successfully in CI
Add modules for instantnoodlep NFC, touchscreen, and MHI related to modem, which is a
work in progress
[ci:skip-build] already built successfully in CI
I don't see any packages in pmaports that actually depend on dhcpcd, and
it hasn't been updated in 3 years... (upstream is at version 10.0.0
now...)
NOTE by ollieparanoid: networkmanager in Alpine used dhcpcd before, so
it was part of our default network stack. But that isn't the case
anymore since 2020:
https://gitlab.alpinelinux.org/alpine/aports/-/commit/db03cedea9469e93f6ede531d92246ddc3c93e4e
As stated in the MRs that added the patch, the ea8061 and s6evr02
panel drivers are originally from work by Simon Shields (fourkbomb).
Let's base our patches on the original commits to preserve authorship,
and note which modifications have been done, and by who. This is a
step towards making these patches ready for submission to upstream.
[ci:skip-build]: Already built successfully in CI
The UART console makes the boot process a whole lot slower due to printk
being synchronous. These devices are well enough supported that we can
disable UART logging by default to improve the boot speed. This
constitutes a ~30 second speedup on the SHIFT6mq at 115200 baud.
Also update the patches with new, rebased ones straight from
the linux-amlogic mailing list, and rename them.
Signed-off-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
[ci:skip-build] already built successfully in CI
Plasma Bigscreen requires specific configuration on the RPi4 to tell it
to load some device-specific stuff. In this case to disable 4K mode as
the device can not handle it
[ci:skip-build] already built successfully in CI
We need to tell openrc-settingsd which ntp service to use, otherwise
it'll default to busybox ntpd which we don't want.
Additionally make sure openrc-settingsd service gets launched at boot
with the post-install/post-upgrade script.
[ci:skip-build]: already built successfully in CI
Get the githooks from alpine, with the following changes:
* Make it possible to parse the additionally nested "device" folder
with the exceptions mentioned in our COMMITSTYLE
* Ignore "device/*" as a possible prefix for the commit
* Replace abuild references with pmbootstrap
Relates #2055
[ci:skip-build]: already built successfully in CI
deviceinfo allows to disable the framebuffer which automatically
skips the splash on boot. Honor this setting as well for the shutdown
splash. Also honor the PMOS_NOSPLASH cmdline parameter as well.
[ci:skip-build]: already built successfully in CI
Angler and Bullhead support is in early stage other msm899{2,4} does not
use the package yet => safe to use rc kernels to get closer to
qcom/for-next git tree.
Kernel 6.2 and 6.3 got few memory map fixes for angler and bullhead.
* Added 3 not yet merged patches for angler:
- add regulators
- memory overlap fixes
- proper cont_splash_mem setup
* Removed 0004-arm64-dts-qcom-msm8992-Don-t-use-sfpb-mutex.patch
(already applied and backported to 6.1 stable), thus renumber the
following patch.
* config
- Enable zram with lzo-rle, add pmb:kconfigcheck-zram (fixes warning:
zramctl: /dev/zram0: failed to set algorithm: Invalid argument)
- Enable crc32, lz4hc, zstd.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
[ci:skip-build]: already built successfully in CI
Make it easier to look up the librem5-base version that was used in the
device-purism-librem5 package, e.g. for writing service pack release
notes:
> Purism Librem 5 Phone (librem5-base: 58pureos1)
[ci:skip-build]: already built successfully in CI
The only thing we define in the config file is "SpacesAftertabs": true
besides the version. Apparently it works fine if the version is
removed, and it avoids an error if the version changed (as it just did
now):
> Version from config file is not the same as the version of the binary
> Binary: 2.7.0, Config 2.6.0
We removed the "install_if" of the APK plugin on GS so that one could
use GNOME Software exclusively for flatpak
[ci:skip-vercheck]
[ci:skip-build]: already built successfully in CI
Update from librem5-bae 56 to 58, which includes the following changes
from Purism
* default: gadget: Use CDC-NCM instead of CDC-ECM
* defaults: Add an initramfs script to reencrypt LUKS rootfs
* defaults: librem5-pm: Add rules for EM7565 and SIM7912G
* defaults: pulse: Reduce fragment size to 22 ms
* defaults: Switch USB PM timeouts back to 2s for devices and 0 for hub
* defaults: Enable WiFi powersave with brcmfmac driver
* defaults: usb_gadget: Run service as a dependency of UDC device unit
* defaults: usb_gadget: Set Before= relation to network.target
* defaults: librem5-pm: Enable NO_SUSPEND quirk and adjust PM properties
* d/control: Bump Librem 5 kernel dependency to 6.1.19pureos1
Note, that this update doesn't fix the modem disapearing modem during
suspend. So we keep the current workarounds we have.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[ci:skip-build] already built successfully in CI
Not everyone's setup includes "pmbootstrap" as a command in $PATH.
Currently, in such setups, $ pmbootstrap ci kconfig (and potentially
other testcases) in the pmaports repository do not work as they expect
the "pmbootstrap" command to exist. Resolve this by checking whether
PMBOOTSTRAP_CMD is set and use that as command for invoking pmbootstrap.
If it isn't set (because you're using an old pmbootstrap version or
invoking a script directly for some reason), fall back to the old
behaviour as to not break compatibility.
Depends on pmbootstrap patch that sets PMBOOTSTRAP_CMD to argv[0]:
https://lists.sr.ht/~postmarketos/pmbootstrap-devel/patches/39995
sudo-ldap is providing cmd:sudo/sudo-virt.
Replace files from sudo-ldap to solve conflict about /etc/sudoers
Fixes#2032
[ci:skip-build]: already built successfully in CI
Previously this was set in the project settings, but according to the
GitLab documentation this can now be set using this file since GitLab
version 14.8. Keep it here to make sure it's version controlled as well.
Enable options required for the Android 11 image inside waydroid:
* CONFIG_BPF_SYSCALL
* CONFIG_CGROUP_BPF
* CONFIG_PSI (already set for this kernel)
* not CONFIG_PSI_DEFAULT_DISABLED (already set for this kernel)
The same will be done for all devices in main and community in the
following patches. Also add V=1 for all kernels I'm modifying that are
below 6.2 (see issue 1990).
Kernel configuration addition:
Just like on the PinePhone Pro I enabled the newly added Lazy RCU scheduler.
RCU_LAZY can help battery-powered systems like the PinePhone Pro in a few ways:
1. Reduced CPU usage: Because RCU_LAZY allows readers to access shared data structures without acquiring locks or other synchronization primitives,
it reduces the amount of CPU time that is required to manage synchronization. This can be particularly beneficial in battery-powered systems,
where reducing CPU usage can extend battery life.
2. Reduced memory usage: RCU_LAZY delays the creation of multiple versions of the shared data structure until they are actually needed.
This reduces the amount of memory that is required to store these versions.
In battery-powered systems, where memory usage can be a critical resource, this can help to conserve power.
3. Reduced synchronization overhead: RCU_LAZY reduces the overhead of synchronization by delaying the creation of multiple versions of the shared data structure.
This can reduce the amount of time that is spent acquiring and releasing locks or other synchronization primitives,
which can help to conserve power in battery-powered systems.
Signed-off-by: Jan Jasper de Kroon <jajadekroon@gmail.com>
[ci:skip-build] already built successfully in CI
linux-postmarketos-omap now supports the Nokia N900 and its OMAP3430 SoC, so
drop this device-specific fork
[ci:skip-build] already built successfully in CI
Switch from armhf to armv7
- Apart of the usual stuff CONFIG_CRYPTO_AES_ARM_BS must be disabled
otherwise it breakes kernel compilation with some weird assembler error
Netboot
- CONFIG_BLK_DEV_NBD=y enables /dev/nbd support
- nbd.max_part=16 kernel parameter must be added otherwise it's zero
which causes that kpartx cannot create partitions
[ci:skip-build]: Already built successfully in CI
Initial commit of the librem5-agps scripts from Purism. These are used
to manage the Librem5 GNSS and download AGPS data.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[ci:skip-build] already built successfully in CI
Also enable support for LIRC and /dev/uinput.
Signed-off-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
[ci:skip-build]: Already built successfully in CI
Soon openrc-settingsd (hostnamed) will uses these properties so the
information can be exposed to apps like GNOME Settings.
Let's also move the shellcheck comment to the outer scope, otherwise
we'd need four of these comments now, and let's not use ${} but just $.
Bugfix release, nothing major though. Full changelog:
https://gitlab.com/postmarketOS/postmarketos-mkinitfs/-/tags/2.1.1
Note: git was dropped as a makedepends because it's not actually
needed... I forgot that I could just set VERSION at build time. Oops.
[ci:skip-build] already built successfully in CI
Remove maintainers who could not be reached to test v22.12. Add exkc as
maintainer for firmware-pine64-rockpro64 as discussed in review of this
patch.
[ci:skip-build]: already built successfully in CI
This is a revert of the change introduced in 4eda0715 to support an
uncompressed initramfs-extra. osk-sdl support results in an initramfs-extra
that is too big for some devices with a small (traditional) /boot partition
Also see: https://gitlab.com/postmarketOS/pmaports/-/issues/2009
[ci:skip-build]: Already built successfully in CI
- upgrade to 6.2.1
- drop musb patch (not needed since linux mainline commit
ffbe2feac59b37c8dc536727552b4f375e1b9aec)
- enable LRU_GEN
[ci:skip-build]: Already built successfully in CI
The modesetting driver previously provided by xf86-video-modesetting is
now shipped with xorg-server.
[ci:skip-build]: already built successfully in CI
From what I can tell, the package firmware-samsung-on7-wcnss-nv should
have been put as dependency since the on7lte package doesn't exist, and
I can't seem to find a trace of it.
[ci:skip-build] already successfully built in CI
Changes the dependency from pmos-mkinitfs to pmos-initramfs, so now the
dependency chain for boot config packages is:
base -> postmarketos-initramfs -> postmarketos-mkinitfs -> boot-deploy
Sorting dependencies this way makes sense because "base" just needs an
initramfs, it doesn't care about the implementation (that currently uses
"postmarketos-mkinitfs.")
[ci:ignore-count]
[ci:skip-build] already successfully built in CI
- Move base files/modules out of package, this package now only provides
the mkinitfs tool.
- Add all required modules, these were copied over from
postmarketos-mkinitfs and sorted
- Use new exe name in trigger
- Update triggers to ignore /etc, add /usr/share/mkinitfs. No packages
should be installing into /etc/mkinitfs/
- Support building/installing docs
- Add vendored deps
- Change trigger path
This package contains base file and module lists for the initramfs /
initramfs-extra archives, along with the init.sh
The primary reason for doing this is so that changes to these
files/lists can be properly versioned (in pkgver), and (re)building
mkinitfs itself is no longer required for these changes.
- Add base file list for initramfs. The dirs at path
/usr/share/postmarketos-mkinitfs/* are "new" in mkinitfs 2.0
- Install default modules to /usr/share
- Install system config to /usr/share/mkinifs
- Add base files for -extra archive
- Create user config dirs
- Update hook dirs in init.sh, change from mkinitfs 2.0
- Remove splash images, obsolete since pbsplash
- Support uncompressed initramfs-extra
Include adsp, cdsp and slpi firmware and add the linux-firmware-qca
dependency for qca6390-bt.
Also correct the module name for spi-geni-qcom in deviceinfo.
Kernel configuration addition:
Enabled the newly added Lazy RCU scheduler.
RCU_LAZY can help battery-powered systems like the PinePhone Pro in a few ways:
1. Reduced CPU usage: Because RCU_LAZY allows readers to access shared data structures without acquiring locks or other synchronization primitives,
it reduces the amount of CPU time that is required to manage synchronization. This can be particularly beneficial in battery-powered systems,
where reducing CPU usage can extend battery life.
2. Reduced memory usage: RCU_LAZY delays the creation of multiple versions of the shared data structure until they are actually needed.
This reduces the amount of memory that is required to store these versions.
In battery-powered systems, where memory usage can be a critical resource, this can help to conserve power.
3. Reduced synchronization overhead: RCU_LAZY reduces the overhead of synchronization by delaying the creation of multiple versions of the shared data structure.
This can reduce the amount of time that is spent acquiring and releasing locks or other synchronization primitives,
which can help to conserve power in battery-powered systems.
[ci:skip-build]: already built successfully in CI
Previously, the grep command would detect the /usr/bin/share string
inside of the .ci/grep.sh file, so only check the device folder to
avoid this. Other folders shouldn't contain any kernels anyway.
[ci:skip-build]: Everything but linux-postmarketos-qcom-sm7150
built fine in CI, and linux-postmarketos-qcom-sm7150 built fine
locally. Building linux-postmarketos-qcom-sm7150 via the CI failed
because it took over 3 hours so the CI timed out.
According to Purism, PM on the Sparklan WiFi module works now with
recent kernels, the upstream bug referenced earlier (see diff) was
closed.
Note that this has no effect on the Redpine WiFi module, which is the
default module shipped with the L5.
[ci:skip-build] already built successfully in CI
This is more of a version bump, compared to the past few releases. This
kernel should receive more of these types of releases, especially when
there is less hardware left to bring up.
[ci:skip-build] already built successfully in CI
Installing wys and anything else on all gnome-related UIs is better than
just having a special case for phosh. Phosh should pull in
pmos-base-ui-gnome.
This is a dummy package that other packages can install_if on to install
the appropriate camera app for the device/UI. It's intended to be added
to pmb_recommends= for pmos-ui-* packages that want to have a camera by
default.
This contains an OpenRC service that clears the RTC wake alarm.
Users who don't want the RTC wake alarm to power on their phone from
powered-off state can use this service to clear the alarm during shutdown.
Fixes#1970
[ci:skip-build] already built successfully in CI
Let the user select between two kernel variants using the different
device trees for the different panel variants (ea8061 and s6evr02)
[ci:skip-build]: Already built successfully in CI
Add a driver for the Magnachip EA8061 panel found on some Samsung
Galaxy Note II devices. Split the device trees into two (one for devices
with the already supported S6EVR02 panel and one for the new EA8061
panel).
Note: I didn't write this driver myself. Just like the old S6EVR02
driver, it has been ported from https://github.com/fourkbomb/linux
to the latest mainline Linux version.
According to
https://source.puri.sm/Librem5/linux/-/issues/303#note_160864 enabling
the modem power management results in a unreliable modem, but more power
savings.
With power management on the modem can disconnect at any time,
including during calls. This makes the Librem 5 a very bad phone.
Instead let's ensure it works as a phone with a semi-reliable modem
(there is still the sleep/resume issue
https://source.puri.sm/Librem5/linux/-/issues/423) at the cost of
battery life.
As the Librem5's battery life is already poor, a little bit worse
isn't much different. Either way you need an external battery pack.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[ci:skip-build] already built successfully in CI
I unset CONFIG_ARM64_PTR_AUTH_KERNEL because the i.MX 8 CPU in the
Librem 5 doesn't support features from ARMv8.1-A and above anyway.
Same rationale applies to CONFIG_ARM64_TLB_RANGE being unset.
The google-dru package provides the linux-postmarketos-rockchip as a
kernel and supports linux-firmware-ath10k linux-firmware-rockchip
packages as additional non-free firmware.
Enable the ATH10K kernel module in the kernel config
config-postmarketos-rockchip.aarch64 to enable wifi on devices such as
the Acer Chrometab 10.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[ci:skip-build]: already built successfully in CI
Add the missing kernel.release file to support packaging and fix builds
with:
`pmbootstrap build --envkernel linux-postmarketos-rockchip`
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Fixes this failure on a new install:
ERROR: postmarketos-ui-xfce4-0.5.1-r11.post-install: script exited with error 1
[ci:skip-build]: already built successfully in CI
This port has been compatible with GPU-accelerated UIs like Phosh and
Plasma Mobile for quite a while now. Enable these UIs in the
`pmbootstrap init` menu.
See #1939.
If pbsplash is running when a display manager starts it often causes
issues as display managers want to run on a particular VT, but are
unable to switch the active VT since pbsplash has exclusive control of
the framebuffer.
Making DMs not start until after local would solve the issue but
it would also needlessly delay the boot process.
Until we have a better way to detect display managers starting and react
to it, this will at least get devices working again. Though due to how
openrc resolves service start order it may mean the splash is killed
earlier than necessary.
This enables the DRAM frequency stats driver that can be useful for debugging
issues with the PinePhone. This came up in a discussion in #pinephone on IRC
where megi was helping a pmos user with idle power draw issues.
This also enables the performance, powersave and userspace devfreq governors.
Ref: https://github.com/torvalds/linux/commit/8bfd4858b4bba8fec14e4296cbac71aa55260d60
[ci:skip-build]: already built successfully in CI
Store the full kernel config instead of a fragment, so
"pmbootstrap kconfig check" can properly verify that all required kernel
options are there. Without this, it would fail an upcoming check for
BINFMT_ELF and BINFMT_SCRIPT:
https://lists.sr.ht/~postmarketos/pmbootstrap-devel/patches/38508
With the full config, pmbootstrap found that ANDROID_PARANOID_NETWORK
was enabled while it should be disabled, so disable it.
Fix the mediatek drvgen related build failure with
00_disable_drvgen.patch from linux-wiko-ufeel and including cust.dtsi:
https://wiki.postmarketos.org/wiki/Porting_to_a_new_device#Removing_python2_dependency
[ci:skip-build]: already built successfully in CI
These directories should also trigger a rebuild so that any changes are
reflected in the initramfs.
This will include things like 'files', 'modules' and so on that weren't
previously triggering rebuilds of the initramfs...
[ci:skip-build]: already built successfully in CI
This gets rid of the Tux army on bootup. While it hurts my soul,
removing Tux from bootup makes it less flickery.
[ci:skip-build]: already built successfully in CI
6.1 was not a valid kernel version causing the wlan module installed
into wrong location. 6.1.0 would be correct. Fix that
problem by upgrading to 6.1.12 and make the wlan installation
more robust.
[ci:skip-build]: already built successfully in CI
This is no longer used by anything in pmOS as far as I can tell. One
previous user, ttyescape, has been reworked to use hkdm instead, and the
other previous user, charging-sdl, is no longer available in pmOS.
Closes https://gitlab.com/postmarketOS/pmaports/-/issues/1929
This modifies to the postmarketOS ramdisk init to use the new pbsplash
tool for displaying splash messages, replacing the old fbsplash.
This also moves the show_splash call to run as soon as possible rather
than waiting for mount_subpartitions to run (which can take a while).
Closes https://gitlab.com/postmarketOS/pmaports/-/issues/1936
Additionally, this means that iio-sensor-proxy actually gets enabled
on GNOME and GNOME mobile. Previously, it would get installed there
but not enabled unless the user manually did it.
Otherwise we don't have any document viewer installed by default.
[ci:skip-vercheck]: pkgrel bump is not necessary when changing
recommends.
[ci:skip-build]: already built successfully in CI
Add a generic device that should work on x86_64 ChromeOS devices. This
is mostly a copy of tablet-x64uefi, with ChromeOS-specific stuff from
google-kevin. Keeps the UEFI parts so that it can still be booted with
alternative firmware (i.e. MrChromebox's RW_LEGACY builds). Lightly
tested on a Lenovo IdeaPad 3 Chromebook 11IGL05 (codename "Lick").
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Also added: 0013-media-ov5640-Update-last-busy-timestamp-to-reset-aut.patch
This solves bug of taking greenish pictures with Megapixels, due to
sensor being shutdown to early after taking a picture.
[ci:skip-build]: already built successfully in CI
Add easy support for pulseaudio bluetooth like we have for pipewire
bluetooth.
Will update docs when this is merged.
[ci:skip-build]: already built successfully in CI
xdg-desktop-portal-gnome is needed for example for mime type associations.
Without it, the default gnome based shell installations couldn't detect which
mime types were provided by which applications, xdg-open and the
Default Applications tab in GNOME Control Center didn't work.
This dependency was missing from postmarketos-ui-phosh, so let's add it
and xdg-user-dirs to postmarketos-base-ui-gnome to make sure it's not repeated
in every gnome based UI.
linux-postmarketos-mediatek-mt6735 6.1.9 added full display support and hardware acceleration
as well as haptics. Add a phoc configuration file to set the display scale, and a feedbackd
theme to optimize vibration durations. Route console output to UART to leave the splash
screen clean and to help with debugging when necessary.
[ci:skip-build] already built successfully in CI
If the wlan0 interface is rfkilled down on boot, WiFi won't work until reboot.
It seems that quickly ifconfig'ing wlan0 up and down in sysinit is enough to work around the bug.
[ci:skip-build] already built successfully in CI
It's on its way out already (MR 3815), but until that MR is finished,
bump the pkgrel once more to fix all upstream compat errors:
Increase 'megapixels-purism' pkgrel (6 -> 7), missing depend(s): so:libcamera.so.0.0.3
[ci:skip-build]: Already built successfully in CI
Since re-crypt was finished now all T20/T30 devices
can be switched to use generic u-boot approach
and mount eMMC as external storage to host PC.
Unfortunately or fortunately this deprecates
any Android use on device. Have fun!
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Explicitly depend on the version that allowed mounting with UUIDs, so we
can soon set this explicit dependency for devices that now make use of
this feature.
Dependency chain:
device package
-> postmarketos-base
-> postmarketos-mkinitfs
-> boot-deploy
Related: discussion in MR 3791
Change-Id: Ia140302bb4d309740db85a36374673a6e66c2c2b
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build]: Already built successfully in CI
Changes to defconfig:
* Disable legacy usb gadgets (USB_ETH and friends)
* Enable Multi-Gen LRU (LRU_GEN)
[ci:skip-build]: already built successfully in CI
Bring up support for Samsung T110 Goyawifi.
Working: Display (framebuffer), touchscreen, buttons and Wi-Fi.
Include: kernel source and necesarry firmware for Wi-Fi and Bluetooth.
samsung-goyawifi: fix patch names
samsung-goyawifi: remove mesa-dri-gallium
samsung-goyawifi: fix keyboard in deviceinfo
samsung-goyawifi: fix lightdm
samsung-goyawifi: editor-config ci tabs
samsung-goyawifi: add linux kernel as depends
[ci:skip-build]: Already built successfully in CI
Add the firmware for the CyberTan WC121.
Configuration is added in the newest firmware-linux release, so
complete support will appear in the corresponding Alpine package soon.
[ci:skip-build]: already built successfully in CI
mDNS queries and replies are sent to port 5353.
Update firewall rule in order to make it as tight as possible.
[ci:skip-build]: already built successfully in CI
Protect script when ram_freq is not set
Safely load PSCI DTO to enable CPUidle driver: psci_idle
The PSCI DTO shall only be applied if TF-A & Crust
support CPU idle states [0]. Otherwise the CPU usage
will be at 100%. This will not be visible in top,
lead to overheating and battery drain.
Worst case scenario would lead to a fried chip if
the CPU thermal_zone does not work or is not enabled
in DTS.
[0] https://gitlab.com/postmarketOS/pmaports/-/issues/1901#note_1238456920
I have enough other devices to care about, and honestly haven't touched
my PinePhone in a while. Remove myself as Co-Maintainer from all
relevant packages.
[ci:skip-vercheck]: No rebuild necessary
[ci:skip-build]: Doesn't change resulting packages
This installs zram-init and sets it to start on boot for all
devices/UIs. The included conf.d/zram-init also allows diabling using
zram swap or overriding the size by using a deviceinfo var.
I did an analysis of the pmos base install size with the 'none' UI
selected, after depending on zram-init, and the following new package is
installed:
zram-init-11.1-r1 installed size: 40 KiB
These packages are dependencies of zram-init, however they are already
installed in the base image (with 'none' UI) so they are not counted
above:
util-linux-misc-2.38.1-r0 installed size: 6816 KiB
e2fsprogs-extra-1.46.5-r4 installed size: 1324 KiB
So this seems like a very small price to pay for the benefit of not
making the logic/implementation more complicated than this.
* Starting busybox syslog ... [ ok ]
ssh-keygen: generating new host keys: RSA ECDSA ED25519
* Starting sshd ... [ ok ]
zram swap: activating with size: 243 MB
* Loading zram module...
[ ok ]
* Swap->zram0
[ ok ]
* Starting local ... [ ok ]
This change introduces one new deviceinfo variable:
deviceinfo_zram_swap_pct: percentage of RAM to use for zram swap
Default percentages if the second var is unset are explained in the
zram-init file this commit adds. A value of 0 disables zram swap.
fixes#1133
This wifi module doesn't ship with the L5, but I have one because it's
generally more stable than the redpine thing that does ship with the
L5... however there's a known problem with having PM enabled on it.
This adds a NM config option, that matches specifically on this
device/driver, to disable wifi. PM for the redpine should not be
affected by this config change.
[ci:skip-build] already built successfully in CI
This moves unl0kr and all of its dependencies into the initramfs-extra,
it does so by using a relatively new mkinitfs feature for installing
files into the -extra archive.
[ci:skip-build] already built successfully in CI
By positioning this after extracting the initramfs-extra archive, we can
allow udev to exist in the -extra archive and not have any size impact
on the base initramfs archive.
Any hook that needs udev in the initramfs can get that support, provided
that the hook lists udev requirements in the .files config for it.
Make use of stock depthcharge bootloader to not deal with U-Boot issues:
- broken USB
- broken eMMC
- broken latest version of U-Boot
Use extlinux instead of Grub for users with U-Boot to simplify process.
Also, some of old U-Boot builds may not support EFI.
[ci:skip-build] already built successfully in CI
Make use of stock depthcharge bootloader to not deal with U-Boot issues:
- broken USB
- broken eMMC
- broken latest version of U-Boot
Use extlinux instead of Grub for users with U-Boot to simplify process.
Also, some of old U-Boot builds may not support EFI.
[ci:skip-build] already built successfully in CI
New features:
* msm8994-huawei-angler: Add sdhc1 definition (internal SD card).
Backporting 3 patches:
* 0001-arm64-dts-msm8992-bullhead-add-memory-hole-region.patch
fixes bullhead boot since 6.0-rc1, already in qcom tree
* 0002-arm64-dts-qcom-msm8992-bullhead-Fix-cont_splash_mem-.patch
memory fix, likely to be merged
* 0003-arm64-dts-qcom-msm8992-bullhead-Disable-dfps_data_me.patch
memory fix, likely to be merged
* 0004-arm64-dts-qcom-msm8992-Don-t-use-sfpb-mutex.patch
memory fix, likely to be merged
* 0005-arm64-dts-msm8994-angler-fix-the-memory-map.patch
fixes angler reset during starting services in rootfs,
likely to be merged
Remove all backported commits from newer versions.
While at it, remove various CONFIG_NET_VENDOR_.* and
CONFIG_MSM_.* and CONFIG_.*_QCOM_.* for other SOCs.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
[ci:skip-build]: already built successfully in CI
Shared SoC package for MSM8909
Currently provides a dummy soc-qcom-msm8909 package that depends on
soc-qcom-msm8916 and a soc-qcom-msm8909-modem package for modem support.
Like alcatel-idol3, these devices have a tunning partition. However, the
modem calls it modem_tng instead of modem_tunning. This patch adds the
alternative name for the partition.
An upstream pull request has already been submitted (see patch).
Since the RTC like on most Qualcomm chips is read-only, use
swclock-offset package to fix up time after boot.
And since we don't need msm-fb-refresher on mainline, move it to the
downstream kernel subpackage.
Basic support for the Kobo Libra H2O ebook reader.
Waveform handling shares the same oddities as for the Kobo Clara HD, the
existing waveform from eMMC is used.
Preferred way to install is to export the eMMC as USB Mass storage,
backing it up, and installing there.
U-Boot is a more recent one than the factory u-boot, supporting easy
access for buttons/LEDs. Pressing PageUp while powering on gives you the
possibility to enable USB mass storage mode to restore your backup.
Kernel is the near mainline kernel also used by the Kobo Clara HD.
It lacks some devicetree additions which are planned for the next
update, but basic things like buttons, usb, serial and wifi are
supported.
* lock.sh is specific to Nokia N900, so move to device-nokia-n900
* use tinydm instead of lightdm
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
[ci:skip-build]: already built successfully in CI
Move some dependencies from plasma-desktop to the -extras subpackage, so
they don't get installed by default:
* audiocd-kio (2 MiB): using a CD drive with postmarketOS seems to be a
very rare combination
* kolourpaint (3 MiB): very basic image editor with featureset of MS
paint, I don't think it's that useful in a default install. Users
looking for an image editor may want to use e.g. krita instead and can
install whatever they want to use after the default install is done.
* kwrite (20 MiB): another text editor, kate (3 MiB), is already getting
installed by default
* okular (81 MiB): quite big, and pdfs can also be viewed in firefox
which we install by default
* mesa-demos (50 MiB): rather big for just being some graphical demos
It's always a good idea to keep the install image small, but in this
instance the change was prompted because we currently hit a size limit
when generating install images. In particular, when generating the
v22.12 image for the pinebookpro. The process for generating install
images is not optimized for size (see bpo issue 116) and this should be
improved, but in the meantime let's just reduce the install size with
this patch on edge and backport it to v22.12 so building this image
doesn't fail anymore.
Sizes listed above are for aarch64 and include dependencies that get
removed together with removing the package.
Backport the Purism patch from https://source.puri.sm/Librem5/linux/-/merge_requests/640
"With this patch, older revisions (2.0) should be able to switch between
166MHz and 800MHz as opposed to being stuck to 800MHz all the time, since
that was the only supported frequency in the OPP table."
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[ci:skip-build] already built successfully in CI
The WCNSS firwmare used for motorola-harpia seems to have weird issues
that prevent using WiFi properly except for a few limited channels. It
is not clear why this happens, it seems to be some peculiar firmware
difference (perhaps the channels need to be enabled with some
non-standard command).
Since Motorola uses the same signing keys for all their MSM8916
devices, it is possible to use the firmware from other devices instead.
Initial testing shows promising results when using the older WCNSS
firmware from motorola-osprey instead, it does not seem to have this
issue.
It's not clear yet if this has any negative effects. The WCNSS firmware
should not be device-specific, but theoretically it could be (if
Motorola made some weird changes inside it).
For now just package it in firmware-motorola-osprey-wcnss. This package
can be easily installed on harpia devices for testing (using apk add)
and will then take precendence over the default firmware from the
firmware partition (via msm-firmware-loader).
Move firmware-motorola-osprey from testing to community so that the
package is preserved for motorola-harpia users (testing is deleted in
stable branches).
[ci:skip-build]: already built successfully in CI
motorola-osprey can generally use the firmware from motorola-harpia
(which is a bit newer). However, the WCNSS_qcom_wlan_nv.bin is usually
device specific (it contains some kind of calibration values for
WiFi/BT).
The file packaged in firmware-motorola-osprey-wcnss-nv is identical to
the file in firmware-motorola-harpia-wcnss-nv. However, It looks a bit
like this might be a mistake in the source repository
(https://github.com/pmsourcedump/firmware-motorola-osprey). The
wlan/prima folder there is completely identical to the one used for
motorola-harpia, but the stock ROM and LineageOS use different files.
Fix this by packaging the file from TheMuppets. Also modernize the
firmware-motorola-osprey package by applying pil-squasher to the
venus/video firmware.
motorola-osprey has a very clunky name at the moment "Motorola Moto G
3rd gen. (2015)". The device was mostly just called "Motorola Moto G"
by Motorola, so it is hard to choose a fitting (but unique) name.
In the postmarketOS wiki it is called "Motorola Moto G 2015" so let's
just drop the "3rd gen." in the pmOS device package as well.
Also make the deviceinfo consistent with harpia while at it.
Users can switch to pulseaudio with:
doas apk add sxmo-audio-common-pulse
We can make the poco f1 device APKBUILD depend on
sxmo-common-audio-pulse. This allows you to install pulseaudio on Sxmo
which was the reason Joel said the poco f1 was having issues with call
audio: https://gitlab.com/postmarketOS/pmaports/-/issues/1821
After installing pulseaudio with this patch, the other side still
cannot hear me. I am posting this work so that others can just run
pulseaudio on sxmo and find out what's causing this bug.
Note by ollieparanoid: while it doesn't fix the bug completely, it seems
it's required to make calling work again, something we definitively want
to have in v22.12 so I'm merging this now. Also the sxmo-utils patch was
merged to sxmo-utils upstream, but isn't in alpine yet. Adding this
package (previous patch) temporarily makes sense.
Co-developed-by: Oliver Smith <ollieparanoid@postmarketos.org>
[ci:skip-vercheck]: pkg forked from alpine has pkgrel > 0
[ci:skip-build]: already built successfully in CI
This package is just forked from alpine upstream and patched to support
pulseaudio. This patch should be upstreamed to sxmo but posting here so
that others can help me figure out why audio calls with poco f1 and Sxmo
are broken:
https://gitlab.com/postmarketOS/pmaports/-/issues/1821
Schedutil is a CPU scheduler that is designed to be more efficient than other schedulers, such as the conservative scheduler, in terms of energy consumption.
This is because schedutil uses information about the utilization of individual CPU cores to make more intelligent decisions about when and how to scale the frequency of the CPU.
This can help to reduce the overall power consumption of the device, which can be particularly beneficial for battery-powered devices.
Additionally, schedutil can also help to improve the overall performance of the device by ensuring that the CPU is able to operate at its maximum frequency when needed.
In my personal testing I haven't seen any noticable impact on power consumption, while the performance does certainly noticeably increase
Note: This is only a change in the aarch64 configuration as the armv7 configuration already used the schedutil scheduler as default.
[ci:skip-build]: Already built successfully in CI
This adds initial support to CutiePi tablet, with basic peripherals, sound, touchscreen, and wireless support.
Signed-off-by: Raffaele Tranquillini <raffaele.tranquillini@gmail.com>
Add peripheral overlays
Signed-off-by: Raffaele Tranquillini <raffaele.tranquillini@gmail.com>
[ci:skip-build]: Already built successfully in CI
Schedutil is a CPU scheduler that is designed to be more efficient than other schedulers, such as the conservative scheduler, in terms of energy consumption.
This is because schedutil uses information about the utilization of individual CPU cores to make more intelligent decisions about when and how to scale the frequency of the CPU.
This can help to reduce the overall power consumption of the device, which can be particularly beneficial for battery-powered devices.
Additionally, schedutil can also help to improve the overall performance of the device by ensuring that the CPU is able to operate at its maximum frequency when needed.
In my personal testing I haven't seen any noticable impact on power consumption, while the performance does certainly noticeably increase
[ci:skip-build]: Already built successfully in CI
Use msm8916 kernel package instead of linux-postmarketos-qcom-msm8939
Also remove rmi_core from deviceinfo_modules_initfs
since it's automatically pulled by rmi_i2c
* Enable flash/torch LED (CONFIG_LEDS_QCOM_FLASH)
* Fix USB init when not plugged in during bootloader stage
[ci:skip-build] already built successfully in CI
This is a version bump for the sm6125 mainline kernel fork.
Changes:
* Added UFS nodes to the sm6125 platform
* Enabled UFS nodes for xiaomi-laurel
* Enabled configs required for UFS support (Notoriously
CONFIG_PHY_QCOM_QMP)
* Filled in EXTRAVERSION for kernel fork
* Added SMD RPM regulators for xiaomi-laurel
Signed-off-by: Lux Aliaga <they@mint.lgbt>
[ci:skip-build]: Already built successfully in CI
Fix included in this build:
- Patch which sets GPIO pin for stk3311 as input
- ppp: don't reset 'display state of charge' (dsoc) to 0 on vbat low interrupt
[ci:skip-build]: already built successfully in CI
This upgrade has no effect on postmarketOS, as there were only systemd
service files added to the repository. The upgrade is done solely to
keep track with the newest version.
[ci:skip-build] already built successfully in CI
Update the omap kernel to stable 6.1 release. This commit also contains a patch that
fixes broken usb, which should only be needed for versions 5.19 to 6.1 as later
releases will have a proper fix merged.
[ci:skip-build]: already built successfully in CI
This is an early mainline port for the MediaTek MT6763 Helio P65/G70/G8*
SoCs that boots with all 8 cores online, logs on display (simplefb) or
UART serial console, USB gadget mode facilitating netbooting
postmarketOS while tethered via RNDIS and PMIC enabling functions like
vibrator, power/volume keys.
Since I'm not going by the "mint" alias anymore, I've decided to fix
that on the APKBUILDs
Signed-off-by: Lux Aliaga <they@mint.lgbt>
[ci:skip-build]: Already built successfully in CI
This is a version bump for the sm6125 mainline kernel fork. It should
also fix a config issue.
Changes:
* Made QUSB2 built-in instead of a module (Fixes USB connectivity
issues)
* Updates to xiaomi-laurel device tree to fit new schema
* Changed maintainer name
Signed-off-by: Lux Aliaga <they@mint.lgbt>
This fixes gnss out of the box on the librem 5, by configuring geoclue
to use gnss-share as a nmea source.
I went this route, of overriding a .service file that invokes geoclue
with a command line option, because forking this .service file is much
nicer than forking geoclue.conf. The conf file will likely change over
time to add new app permissions or whatever, and it's unlikely
(hopefull!) that this .service file will change much upstream...
[ci:skip-build] already built successfully in CI
CONFIG_USB_GADGET=y
CONFIG_USB_DWC3_DUAL_ROLE=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_DWC2=y
remove un-necessary activated configs
[ci:skip-build]: already built successfully in CI
Add rules for regulator-haptic, which is used on:
- samsung-e5/e7
- samsung-cprime/gprime
- samsung-j3/j5(x)
Note that regulator-haptic is not supported on some devices yet,
and samsung-e5 is not ported at the moment.
[ci:skip-build]: already built successfully in CI
- Also enabled LRU_GEN by default like on the PinePhone OG
- Set Ext4 module to built-in as this currently is the main fs used for PPP.
Contains the following patch:
- pinephone pro: finished fix for LCD to make it refresh at precisely 60 Hz
[ci:skip-build]: already built successfully in CI
Add new patches:
- enable serial console
- save relocation address to find KASLR
- buttons as keyboard input driver to navigate bootmenu
- bootmenu loop entry selection
Apparently upstream names udev rules with the .udev extension... which
doesn't work with udev (I guess debian has a helper for installing rules
and it renames them?). This adds the expected ".rules" extension to them
so that udev actually uses them.
This update also includes improved ucm config from Purism.
"Lockdown suppport" is also added here, which allows toggling off all of
the hks on the L5 to disable all radios, etc without breaking some
sensors. For more info, see 65ec7038 in librem5-base.
Based on some new (to me...) info from Purism's Sebastian K, there are
apparently Evergreen devices that return different values for board rev,
so we shouldn't assume only r4 are Evergreen, and default to the r2 DT.
But many earlier devices (Birch, Chestnut, Dogwood) may or may not have
the board rev set either. Who knows! Defaulting to the Evergreen DT on
these devices is bad too, but there weren't many of those shipped (I
guess?), at least not compared to the number of Evergreens that aren't
properly identifiable in u-boot... so this using this DT by default is
the best of the two bad options we have.
This comment thread has more info:
https://gitlab.com/postmarketOS/pmaports/-/issues/1643#note_1147248594fixes#1643
[ci:skip-build] already built successfully in CI
Add the CONFIG_DW9714 symbol to the PinephonePro defconfig.
The PinephonePro rear camera module uses the DW9714 VCM to drive the
lens, and a driver is required to successfully complete the media
graph probe sequence.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Kernel source updated to 6.1-rc7
Ext2 and Ext3 modules in aarch64 config disabled because Ext4 is backwards compatible.
2 fixes for PinePhone included in this source:
pinephone: fix power key behavior during suspend (avoid stuck key during resume)
pinephone keyboard: wait for 100ms after enabling power supply and before probing.
[ci:skip-build]: already built successfully in CI
In SDM845, the q6voice kernel driver connects modem and audio backends.
Callaudiod seems to switch to correct audio device and prepares it, however, the audio
device get's closed since no one from the userspace is actively listening to it.
This cuts the audio in call. As a workaround, I have added to script to disable the
suspend-on-idle pulseaudio module during calls, so the audio devices don't close automatically.
Includes the following changes:
- rebase onto rc4
- squash a few changes which were marked to get squashed/fixups
- dropped "wcd934x: use .prepare and .shutdown instead of .trigger"
- OP6 audio device tree changes
- revert of a DSI DCS commit[1], which caused havoc in unprepare
hooks of panel drivers
[1] - https://lore.kernel.org/linux-arm-msm/1892d0af-8aa4-dc03-887a-e44bb623b836@linaro.org/
Change-Id: I4790a278c0d35618ca824a036982769e66767ffd
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
It should have depended on mutter-mobile-schemas instead of
mutter-mobile. Looks like mutter-mobile-schemas was getting installed
instead of mutter-mobile for it only by chance until now.
[ci:skip-build]: already built successfully in CI
Downstream for kernel development, not for actual use.
Kernel defconfig taken from stock with:
- CONFIG_ANDROID_PARANOID_NETWORK unset
- CONFIG_DEVTMPFS set
- CONFIG_EXT4_FS_POSIX_ACL set
- CONFIG_LOCALVERSION set to "-downstream"
- CONFIG_SYSVIPC set
- CONFIG_USB_CONFIGFS_RNDIS set
- CONFIG_USER_NS set
Change-Id: I22bfd30dfc664dfaa2123c856b3662ddb37e760f
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
[ci:skip-build]: already built successfully in CI
The variable describes the configfs function name to use, no matter if
it's rndis, ncm, ecm or any other function. So change the name of the
variable, the string we write to the configuration file and some
comments.
Enable vulkan on supported hardware configurations
out of the box.
Change-Id: I6c8e1713e7c834aae3a162b8a681f5abde02ed5e
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Since 00648d0282dcca1da453c0b20d27e24bf901a854, the correct serial console name
is ttySx instead of the older ttyOx. Reflect this in cmdline passed to kernel
via u-boot
[ci:skip-build]: already built successfully in CI
Recommend installing:
- fwupd
- Receive firmware updates for supported hardware
The following packages are required to show device information at:
- Settings -> About this System -> Show More Information
Devices
- Firmware Security
- aha
- fwupd
- PCI
- pciutils
Graphics
- OpenGL
- mesa-demos
- Vulkan
- vulkan-tools
- Wayland
- wayland-utils
- X-Server
- xdpyinfo
Change-Id: I8a1eb484720f717f0504418f7c5c6af505b081b6
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build]: already built successfully in CI
The file brcmfmac43455-sdio.raspberrypi,4-model-b.bin is now provided by
linux-firmware-brcm package in Alpine. Remove to symlink to stop the
file conflict.
Note that the URLs in these scripts are not only for information, but
they are also used as marker by pmbootstrap so it knows these are
compatible with 'pmbootstrap ci'. I just fixed the typo in the
pmbootstrap code as well and made a new release, use pmbootstrap 1.50.0
or above to have it recognize these scripts with 'pmbootstrap ci' again.
flatbuffers should have been available on armv7,
since aports 0f3295fb0660f5caf59b8b2385f7c9305f1d57f0
[ci:skip-vercheck]
[ci:skip-build]: already built successfully in CI
I renamed the repository so GitHub changed all the checksums. :(
[ci:skip-vercheck]: the source files are still exactly the same
[ci:skip-build]: Already built successfully in CI
Support launching postmarketOS in QEMU on riscv64 architecture. It is
mostly copied from device-qemu-aarch64 with some riscv64-specific
modifications.
Currently UIs using Xorg like Mate, XFCE4 and LXQT work fine, Wayland
UIs like weston, plasma-mobile etc didn't work in my testing.
Also using "pmbootstrap qemu --tablet" is needed to make mouse input
work, the defaults don't seem to work at the moment.
[ci:skip-build]: already built successfully in CI
Now that touchscreen driver is supported in kernel, include the module
in initfs so it's available there.
[ci:skip-build]: Already built successfully in CI
Reimplement the distfile-check as python test inside this git
repository, so we don't need to download a tarball of ci-common.git to
run it. This would not have been nice for running the test with
'pmbootstrap ci', as we don't want it to get downloaded every time the
test runs.
This new implementation is done in less than 40 lines of code, very fast
and doesn't need to create a lot of files in /tmp to build a
"distfiletree".
Prepare to add a new test making use of the
parse_source_from_checksums() function in test_unreferenced_files.py by
extending the function to not only return the checksum file names, but
also the checksums. Also rename the file from test_unreferenced_files.py
to test_source.py.
Adjust all CI scripts that make use of .ci/common.py to
'pmbootstrap ci'. Move all scripts that are not direct entry points to
running CI scripts to .ci/lib.
Comment out the dtb check, as it is failing. Apparently it didn't run
properly before. Let's fix this after this CI change is done.
Split out the grep for CHANGEME into a separate .ci/grep.sh script, as
it's not related to shellcheck and also there's another grep check that
I'll move there in a follow-up patch.
Add a wrapper .ci/wiki.sh, that pmbootstrap ci can run and use it in
gitlab-ci.yml. Add a .ci/lib/gitlab_prepare_ci.sh script that makes a
user available with sudo, as expected by the pmbootstrap ci compatible
scripts. Set up binfmt_misc too while at it, it will be needed for
running pmbootstrap.
The next patches will adjust the rest of the CI scripts and move the old
scripts in the .ci/lib dir, so only the scripts that should be called
directly are in the .ci dir.
Related: https://postmarketos.org/pmb-ci
Remove mainline postfix in initramfs module list,
because sagit has only 1 kernel for now.
Blacklisting ipa module fixes poweroff.
See 68cdc1ea2b commit for more info.
[ci:skip-build]: already built successfully in CI
This is an early mainline port for the MediaTek MT6763 Helio P23 SoC
that just about boots in about 3 minutes with one core online, logs on
display (simplefb) or UART serial console and USB gadget mode
facilitating netbooting postmarketOS while tethered via RNDIS.
kgx was renamed to gnome-console with the release of version 42.beta, so
let's reflect that in our Phosh UI package.
[ci:skip-vercheck]: pkgrel bump is not necessary when changing
recommends.
Loaded 100 of 1363 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.